On the crystallography and reversibility of lithium electrodeposits at ultrahigh capacity
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Lithium metal is a promising anode for energy-dense batteries but is hindered by poor reversibility caused by continuous chemical and electrochemical degradation. Here we find that by increasing the Li plating capacity to high values (e.g., 10–50 mAh cm−2), Li deposits undergo a morphological transition to produce dense structures, composed of large grains with dominantly (110)Li crystallographic facets. The resultant Li metal electrodes manifest fast kinetics for lithium stripping/plating processes with higher exchange current density, but simultaneously exhibit elevated electrochemical stability towards the electrolyte. Detailed analysis of these findings reveal that parasitic electrochemical reactions are the major reason for poor Li reversibility, and that the degradation rate from parasitic electroreduction of electrolyte components is about an order of magnitude faster than from chemical reactions. The high-capacity Li electrodes provide a straightforward strategy for interrogating the solid electrolyte interphase (SEI) on Li —with unprecedented, high signal to noise. We find that an inorganic rich SEI is formed and is primarily concentrated around the edges of lithium particles. Our findings provide straightforward, but powerful approaches for enhancing the reversibility of Li and for fundamental studies of the interphases formed in liquid and solid-state electrolytes using readily accessible analytical tools.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Benchmarking Heterogeneous Electrocatalysts for the Oxygen Evolution Reaction
McCrory, C. C. L., Jung, S., Peters, J. C., & Jaramillo, T. F. (2013) · Journal of the American Chemical Society · doi:10.1021/ja407115p · Cited by 7,026
High-Efficiency Lithium Metal Batteries with Fire-Retardant Electrolytes
Chen, S., Zheng, J., Yu, L., Ren, X., Engelhard, M. H., Niu, C., Lee, H., Xu, W., Xiao, J., Liu, J., et al. (2018) · Joule · doi:10.1016/j.joule.2018.05.002 · Cited by 654
Self-citationHigh-Efficiency Lithium-Metal Anode Enabled by Liquefied Gas Electrolytes
Yang, Y., Davies, D. M., Yin, Y., Borodin, O., Lee, J. Z., Fang, C., Olguin, M., Zhang, Y., Sablina, E. S., Wang, X., et al. (2019) · Joule · doi:10.1016/j.joule.2019.06.008 · Cited by 268
Cited by
Ultrafast deposition of faceted lithium polyhedra by outpacing SEI formation
Yuan, X., Liu, B., Mecklenburg, M., & Li, Y. (2023) · Nature · doi:10.1038/s41586-023-06235-w · Cited by 265
Metadata
- Authors
- Zhao, Q., Deng, Y., Utomo, N. W., Zheng, J., Biswal, P., Yin, J., & Archer, L. A.
- Venue
- Nature Communications
- Published
- 2021-10-15
- Volume
- 12
- Issue
- 1
- Pages
- 6034-6034
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W3206923212
- Cited by
- 181
- References
- 3
- FWCI
- 6.77
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: On the crystallography and reversibility of lithium electrodeposits at ultrahigh capacity. https://app.cochat.ai/papers/10.1038/s41467-021-26143-9
- The paper
- Zhao, Q., Deng, Y., Utomo, N. W., Zheng, J., Biswal, P., Yin, J., & Archer, L. A. (2021). On the crystallography and reversibility of lithium electrodeposits at ultrahigh capacity. Nature Communications. https://doi.org/10.1038/s41467-021-26143-9
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.