The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Room-temperature high-precision printing of flexible wireless electronics based on MXene inks
Open accessAbstract
Wireless technologies-supported printed flexible electronics are crucial for the Internet of Things (IoTs), human-machine interaction, wearable and biomedical applications. However, the challenges to existing printing approaches remain, such as low printing precision, difficulty in conformal printing, complex ink formulations and processes. Here we present a room-temperature direct printing strategy for flexible wireless electronics, where distinct high-performance functional modules (e.g., antennas, micro-supercapacitors, and sensors) can be fabricated with high resolution and further integrated on various flat/curved substrates. The additive-free titanium carbide (Ti 3 C 2 Tx) MXene aqueous inks are regulated with large single-layer ratio (>90%) and narrow flake size distribution, offering metallic conductivity (~6, 900 S cm−1) in the ultrafine-printed tracks (3 μm line gap and 0.43% spatial uniformity) without annealing. In particular, we build an all-MXene-printed integrated system capable of wireless communication, energy harvesting, and smart sensing. This work opens a door for high-precision additive manufacturing of printed wireless electronics at room temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The world of two-dimensional carbides and nitrides (MXenes)
VahidMohammadi, A., Rosen, J., & Gogotsi, Y. (2021) · Science · doi:10.1126/science.abf1581 · Cited by 3,191
Oxidation Stability of Colloidal Two-Dimensional Titanium Carbides (MXenes)
Zhang, C. J., Pinilla, S., McEvoy, N., Cullen, C. P., Anasori, B., Long, E., Park, S.-H., Seral-Ascaso, A., Shmeliov, A., Krishnan, D., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00745 · Cited by 1,725
Self-citationZhang, C. (., Anasori, B., Seral‐Ascaso, A., Park, S., McEvoy, N., Shmeliov, A., Duesberg, G. S., Coleman, J. N., Gogotsi, Y., & Nicolosi, V. (2017) · Advanced Materials · doi:10.1002/adma.201702678 · Cited by 1,159
Self-citation3D printing of soft robotic systems
Wallin, T. J., Pikul, J., & Shepherd, R. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0002-2 · Cited by 942
A New Frontier of Printed Electronics: Flexible Hybrid Electronics
Khan, Y., Thielens, A., Muin, S., Ting, J., Baumbauer, C., & Arias, A. C. (2020) · Advanced Materials · doi:10.1002/adma.201905279 · Cited by 891
Additive manufacturing of silica aerogels
Zhao, S., Siqueira, G., Drdova, S., Norris, D., Ubert, C., Bonnin, A., Galmarini, S., Ganobjak, M., Pan, Z., Brunner, S., et al. (2020) · Nature · doi:10.1038/s41586-020-2594-0 · Cited by 676
Stamping of Flexible, Coplanar Micro‐Supercapacitors Using MXene Inks
Zhang, C. (., Kremer, M. P., Seral‐Ascaso, A., Park, S., McEvoy, N., Anasori, B., Gogotsi, Y., & Nicolosi, V. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705506 · Cited by 637
Self-citationZhang, C. (., Ma, Y., Zhang, X., Abdolhosseinzadeh, S., Sheng, H., Lan, W., Pakdel, A., Heier, J., & Nüesch, F. (2020) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12058 · Cited by 605
Self-citationWater-based and biocompatible 2D crystal inks for all-inkjet-printed heterostructures
McManus, D., Vranic, S., Withers, F., Sanchez-Romaguera, V., Macucci, M., Yang, H., Sorrentino, R., Parvez, K., Son, S.-K., Iannaccone, G., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2016.281 · Cited by 577
Functional inks and printing of two-dimensional materials
Hu, G., Kang, J., Ng, L. W. T., Zhu, X., Howe, R. C. T., Jones, C. G., Hersam, M. C., & Hasan, T. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00084k · Cited by 569
Cited by
Advances in graphene-based flexible and wearable strain sensors
Chen, H., Zhuo, F., Zhou, J., Liu, Y., Zhang, J., Dong, S., Liu, X., Elmarakbi, A., Duan, H., & Fu, Y. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.142576 · Cited by 386
Self-citation
Metadata
- Authors
- Shao, Y., Wei, L., Wu, X., Jiang, C., Yao, Y., Peng, B., Chen, H., Huangfu, J., Ying, Y., Zhang, C. J., & Ping, J.
- Venue
- Nature Communications
- Published
- 2022-06-09
- Volume
- 13
- Issue
- 1
- Pages
- 3223-3223
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W4281610279
- Cited by
- 284
- References
- 39
- FWCI
- 15.79
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Room-temperature high-precision printing of flexible wireless electronics based on MXene inks. https://app.cochat.ai/papers/10.1038/s41467-022-30648-2
- The paper
- Shao, Y., Wei, L., Wu, X., Jiang, C., Yao, Y., Peng, B., Chen, H., Huangfu, J., Ying, Y., Zhang, C. J., & Ping, J. (2022). Room-temperature high-precision printing of flexible wireless electronics based on MXene inks. Nature Communications. https://doi.org/10.1038/s41467-022-30648-2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
