3D-patterned inverse-designed mid-infrared metaoptics
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Modern imaging systems can be enhanced in efficiency, compactness, and application through the introduction of multilayer nanopatterned structures for manipulation of light based on its fundamental properties. High transmission multispectral imaging is elusive due to the commonplace use of filter arrays which discard most of the incident light. Further, given the challenges of miniaturizing optical systems, most cameras do not leverage the wealth of information in polarization and spatial degrees of freedom. Optical metamaterials can respond to these electromagnetic properties but have been explored primarily in single-layer geometries, limiting their performance and multifunctional capacity. Here we use advanced two-photon lithography to realize multilayer scattering structures that achieve highly nontrivial optical transformations intended to process light just before it reaches a focal plane array. Computationally optimized multispectral and polarimetric sorting devices are fabricated with submicron feature sizes and experimentally validated in the mid-infrared. A final structure shown in simulation redirects light based on its angular momentum. These devices demonstrate that with precise 3-dimensional nanopatterning, one can directly modify the scattering properties of a sensor array to create advanced imaging systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Orbital angular momentum of light and the transformation of Laguerre-Gaussian laser modes
Allen, L., Beijersbergen, M. W., Spreeuw, R. J. C., & Woerdman, J. P. (1992) · Physical Review A · doi:10.1103/physreva.45.8185 · Cited by 10,455
Terabit free-space data transmission employing orbital angular momentum multiplexing
Wang, J., Yang, J.-Y., Fazal, I. M., Ahmed, N., Yan, Y., Huang, H., Ren, Y., Yue, Y., Dolinar, S., Tur, M., et al. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.138 · Cited by 4,633
Inverse design in nanophotonics
Molesky, S., Lin, Z., Piggott, A. Y., Jin, W., Vucković, J., & Rodriguez, A. W. (2018) · Nature Photonics · doi:10.1038/s41566-018-0246-9 · Cited by 1,818 · cited 1×
“Searching the high-dimensional space of permittivity profiles, typically for a local optimum to an electromagnetic merit function, is referred to as inverse design [3,4].”
Adjoint shape optimization applied to electromagnetic design
Lalau-Keraly, C. M., Bhargava, S., Miller, O. D., & Yablonovitch, E. (2013) · Optics Express · doi:10.1364/oe.21.021693 · Cited by 753
On-Chip Noninterference Angular Momentum Multiplexing of Broadband Light
Ren, H., Li, X., Zhang, Q., & Gu, M. (2016) · Science · doi:10.1126/science.aaf1112 · Cited by 321
Cited by
Roadmap for Optical Metasurfaces
Kuznetsov, A. I., Brongersma, M. L., Yao, J., Chen, M. K., Levy, U., Tsai, D. P., Zheludev, N. I., Faraon, A., Arbabi, A., Yu, N., et al. (2024) · ACS Photonics · doi:10.1021/acsphotonics.3c00457 · Cited by 420
Self-citationLarge‐Area, High‐Numerical‐Aperture, Freeform Metasurfaces
Zhou, Y., Mao, C., Gershnabel, E., Chen, M., & Fan, J. A. (2024) · Laser & Photonics Reviews · doi:10.1002/lpor.202300988 · Cited by 38
Inverse-designed metasurfaces with facile fabrication parameters
Zhou, Y., Shao, Y., Mao, C., & Fan, J. A. (2024) · Journal of Optics · doi:10.1088/2040-8986/ad33a7 · Cited by 17
Metadata
- Authors
- Roberts, G., Ballew, C., Zheng, T., Garcia, J. C., Camayd-Muñoz, S., Hon, P. W. C., & Faraon, A.
- Venue
- Nature Communications
- Published
- 2023-05-13
- Volume
- 14
- Issue
- 1
- Pages
- 2768-2768
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W4376643593
- Cited by
- 80
- References
- 5
- FWCI
- 4.74
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D-patterned inverse-designed mid-infrared metaoptics. https://app.cochat.ai/papers/10.1038/s41467-023-38258-2
- The paper
- Roberts, G., Ballew, C., Zheng, T., Garcia, J. C., Camayd-Muñoz, S., Hon, P. W. C., & Faraon, A. (2023). 3D-patterned inverse-designed mid-infrared metaoptics. Nature Communications. https://doi.org/10.1038/s41467-023-38258-2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.