CoChat

Electrothermal mineralization of per- and polyfluoroalkyl substances for soil remediation

Open access

Published version of a preprint

The DOI matches its Crossref record; 59 of the 60 references it cites were found in a registry or an index.

Abstract

Per- and polyfluoroalkyl substances (PFAS) are persistent and bioaccumulative pollutants that can easily accumulate in soil, posing a threat to environment and human health. Current PFAS degradation processes often suffer from low efficiency, high energy and water consumption, or lack of generality. Here, we develop a rapid electrothermal mineralization (REM) process to remediate PFAS-contaminated soil. With environmentally compatible biochar as the conductive additive, the soil temperature increases to >1000 °C within seconds by current pulse input, converting PFAS to calcium fluoride with inherent calcium compounds in soil. This process is applicable for remediating various PFAS contaminants in soil, with high removal efficiencies ( >99%) and mineralization ratios ( >90%). While retaining soil particle size, composition, water infiltration rate, and cation exchange capacity, REM facilitates an increase of exchangeable nutrient supply and arthropod survival in soil, rendering it superior to the time-consuming calcination approach that severely degrades soil properties. REM is scaled up to remediate soil at two kilograms per batch and promising for large-scale, on-site soil remediation. Life-cycle assessment and techno-economic analysis demonstrate REM as an environmentally friendly and economic process, with a significant reduction of energy consumption, greenhouse gas emission, water consumption, and operation cost, when compared to existing soil remediation practices.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-024-49809-6

Cites

59 of 59 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Rapid electrothermal mineralization (REM) process for the remediation of PFOA-contaminated soil. a Conceptional schematic of REM process for bulk soil remediation. b Pictures of the sample before (top) and during (bottom) the REM reaction. A spring coiled around the quartz tube is used to increase the mechanical integrity of the tube. c Current curve with the input voltage of 100 V and duration time of 1 s. d Real-time temperature curve at an electric input of 100 V for 1 s recorded by an infrared thermometer. The temperature detection range of the thermometer is 200–1500 °C. e Concentrations of organic fluorine (red line) and mineralized fluorine ion (blue line) in PFOA-contaminated soil varied with input voltages. f Residual PFOA concentrations in soil after repetitive electric pulses, with voltage of 100 V and duration of 1 s each time. The error bars in e and f denote standard deviations, where N = 3. g 19F NMR spectra of the PFOA-contaminated soil extractant before (top) and after (bottom) REM. Inset, the molecular structure of PFOA.
Fig. 1 Rapid electrothermal mineralization (REM) process for the remediation of PFOA-contaminated soil. a Conceptional schematic of REM process for bulk soil remediation. b Pictures of the sample before (top) and during (bottom) the REM reaction. A spring coiled around the quartz tube is used to increase the mechanical integrity of the tube. c Current curve with the input voltage of 100 V and duration time of 1 s. d Real-time temperature curve at an electric input of 100 V for 1 s recorded by an infrared thermometer. The temperature detection range of the thermometer is 200–1500 °C. e Concentrations of organic fluorine (red line) and mineralized fluorine ion (blue line) in PFOA-contaminated soil varied with input voltages. f Residual PFOA concentrations in soil after repetitive electric pulses, with voltage of 100 V and duration of 1 s each time. The error bars in e and f denote standard deviations, where N = 3. g 19F NMR spectra of the PFOA-contaminated soil extractant before (top) and after (bottom) REM. Inset, the molecular structure of PFOA.CC BY · PubMed Central
Fig. 2 Generality of REM process for various PFAS. a–c Concentrations of organic fluorine (red line) and mineralized fluorine ion (blue line) varied with input voltages for a PFOS-contaminated soil, b PFHxS-contaminated soil, and c PFBS-contaminated soil. d–f 19F NMR spectra of the d PFOS, e PFHxS, and f PFBS -contaminated soil extractant before (top) and after (bottom) REM. Insets in d–f are the molecular structure of PFOS, PFHxS, and PFBS, respectively. The dots denote the F peaks and corresponding F attached C atoms. g Removal efficiencies of different kinds of PFAS. h Mineralization ratios of different kinds of PFAS. The error bars in a–c, g, and h denote standard deviations, where N = 3.
Fig. 2 Generality of REM process for various PFAS. a–c Concentrations of organic fluorine (red line) and mineralized fluorine ion (blue line) varied with input voltages for a PFOS-contaminated soil, b PFHxS-contaminated soil, and c PFBS-contaminated soil. d–f 19F NMR spectra of the d PFOS, e PFHxS, and f PFBS -contaminated soil extractant before (top) and after (bottom) REM. Insets in d–f are the molecular structure of PFOS, PFHxS, and PFBS, respectively. The dots denote the F peaks and corresponding F attached C atoms. g Removal efficiencies of different kinds of PFAS. h Mineralization ratios of different kinds of PFAS. The error bars in a–c, g, and h denote standard deviations, where N = 3.CC BY · PubMed Central
Fig. 3 Mechanism of PFAS mineralization during the REM process. a XRD patterns of PFOA/biochar before (red) and after (blue) REM. b C 1s XPS fine spectra of PFOA/biochar before (top) and after (bottom) REM. c F 1s XPS fine spectra of PFOA/biochar before (top) and after (bottom) REM. d IR spectra of PFOA/biochar before (red) and after (blue) REM. e Gibbs free energy change (ΔG) of each PFOA degradation step with (solid line) and without (dash line) Ca2+ varied with temperature. The black dash line denotes ΔG = 0 kJ mol−1. f Simulated variation of C-F bond ratio during REM process with calcium (blue line, F105Ca96) and without calcium (red line). g Optimized structure snapshots after simulated heating treatment with calcium (left, F105Ca96) or without calcium (right). h Relationship between C-F bond ratio after REM and the input atomic ratio of calcium and fluorine. Insets are the structures of PFOA (top right) and mineralized CaF2 (bottom left).
Fig. 3 Mechanism of PFAS mineralization during the REM process. a XRD patterns of PFOA/biochar before (red) and after (blue) REM. b C 1s XPS fine spectra of PFOA/biochar before (top) and after (bottom) REM. c F 1s XPS fine spectra of PFOA/biochar before (top) and after (bottom) REM. d IR spectra of PFOA/biochar before (red) and after (blue) REM. e Gibbs free energy change (ΔG) of each PFOA degradation step with (solid line) and without (dash line) Ca2+ varied with temperature. The black dash line denotes ΔG = 0 kJ mol−1. f Simulated variation of C-F bond ratio during REM process with calcium (blue line, F105Ca96) and without calcium (red line). g Optimized structure snapshots after simulated heating treatment with calcium (left, F105Ca96) or without calcium (right). h Relationship between C-F bond ratio after REM and the input atomic ratio of calcium and fluorine. Insets are the structures of PFOA (top right) and mineralized CaF2 (bottom left).CC BY · PubMed Central
Fig. 4 Soil properties after REM treatment. a Pictures of raw soil (left), REM soil (middle), and calcined soil (right). b Particle size distribution of raw soil (red), REM soil (blue), and calcined soil (black). The shadows denote standard deviations, where N = 5. c XRD patterns of raw soil (red), REM soil (blue), and calcined soil (black). The powder diffraction file (PDF) reference card for quartz, 01-086-1629 (triangle). d XRF of raw soil (red), REM soil (blue), and calcined soil (black). e Water penetration liquid level varied with time for raw soil (red), REM soil (blue), and calcined soil (black). f Exchangeable soil nutrient content change after REM and calcination processes. c0 and c are the concentrations of exchangeable nutrients in raw soil (blue) and REM soil (black), respectively. The error bars in e and f denote standard deviations, where N = 3. g Survival ratio of springtail cultured in different soil samples. h Survival ratio of isopod cultured in different soil samples. The error bars in g and h denote standard deviations, which are calculated from model-predicted values from the generalized linear models with N = 7 and N = 8, respectively.
Fig. 4 Soil properties after REM treatment. a Pictures of raw soil (left), REM soil (middle), and calcined soil (right). b Particle size distribution of raw soil (red), REM soil (blue), and calcined soil (black). The shadows denote standard deviations, where N = 5. c XRD patterns of raw soil (red), REM soil (blue), and calcined soil (black). The powder diffraction file (PDF) reference card for quartz, 01-086-1629 (triangle). d XRF of raw soil (red), REM soil (blue), and calcined soil (black). e Water penetration liquid level varied with time for raw soil (red), REM soil (blue), and calcined soil (black). f Exchangeable soil nutrient content change after REM and calcination processes. c0 and c are the concentrations of exchangeable nutrients in raw soil (blue) and REM soil (black), respectively. The error bars in e and f denote standard deviations, where N = 3. g Survival ratio of springtail cultured in different soil samples. h Survival ratio of isopod cultured in different soil samples. The error bars in g and h denote standard deviations, which are calculated from model-predicted values from the generalized linear models with N = 7 and N = 8, respectively.CC BY · PubMed Central
Fig. 5 Scalability, LCA, and TEA for the remediation of PFAS-contaminated soil. a Picture of the kilogram-scale REM process. b Simulated distribution of current density on the soil surface with external voltage input. c 3D mapping of PFOA removal efficiency. The mapping was sampled from 52 positions of 4 plane depths with an interval of 2 cm and 13 points in each plane. d Materials flow analysis of REM. The dash rectangle denotes the system boundary. e Comparison of cumulative energy demand. f Comparison of cumulative GHG emission. g Comparison of operating cost. h Comprehensive comparison of different soil-remediation methods.
Fig. 5 Scalability, LCA, and TEA for the remediation of PFAS-contaminated soil. a Picture of the kilogram-scale REM process. b Simulated distribution of current density on the soil surface with external voltage input. c 3D mapping of PFOA removal efficiency. The mapping was sampled from 52 positions of 4 plane depths with an interval of 2 cm and 13 points in each plane. d Materials flow analysis of REM. The dash rectangle denotes the system boundary. e Comparison of cumulative energy demand. f Comparison of cumulative GHG emission. g Comparison of operating cost. h Comprehensive comparison of different soil-remediation methods.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 59 references

Research works printed but not linked: 3

  1. Pilbeam, D. J. & Morley, P. S. Handbook Of Plant Nutrition (CRC Press, 2016).
  2. Barman, U. & Choudhury, R. D. Soil texture classification using multi class support vector machine. Inf. Process. Agric. 7, 318–332 (2020).
  3. Weil, R. & Brady N. The Nature And Properties Of Soils. 15th edn. (Pearson Education, Inc., 2017).

Cited by

See all 64

Metadata

Authors
Cheng, Y., Deng, B., Scotland, P., Eddy, L., Hassan, A., Wang, B., Silva, K. J., Li, B., Wyss, K. M., Ucak-Astarlioglu, M. G., Chen, J., Liu, Q., Si, T., Xu, S., Gao, X., JeBailey, K., Jana, D., Torres, M. A., Wong, M. S., Yakobson, B. I., Griggs, C., McCary, M. A., Zhao, Y., & Tour, J. M.
Affiliations
  • Rice University (US)
  • Corban University (US)
Corresponding author
  • Deng, Bing
  • Zhao, Yufeng
  • Tour, James M.
Venue
Nature Communications
Published
2024-07-20
Volume
15
Issue
1
Pages
6117-6117
ISSN
2041-1723 (ISSN-L)
OpenAlex
W4400853326
Cited by
64
References
60
Citations by year
2026: 36 · 2025: 20 · 2024: 8
FWCI
8.41
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • ChemRxiv (acceptedVersion, cc-by-nc-nd)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
  • Rice Research Repository (Rice University) (submittedVersion, cc-by)
Funders
  • United States Department of Defense | United States Air Force | AFMC | Air Force Office of Scientific Research (FA9550-22-1-0526)
  • United States Department of Defense | United States Army | US Army Corps of Engineers | Engineer Research and Development Center (W912HZ-21-2-0050)
Topics
  • Physical Sciences › Environmental Science › Environmental Chemistry › Per- and polyfluoroalkyl substances research
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental remediation with nanomaterials
  • Physical Sciences › Environmental Science › Water Science and Technology › Advanced oxidation water treatment
Keywords
per- and polyfluoroalkyl substances, PFAS, soil remediation, biochar, calcium fluoride, life cycle assessment, techno-economic analysis, energy consumption, greenhouse gas emissions, water consumption, in situ remediation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Electrothermal mineralization of per- and polyfluoroalkyl substances for soil remediation. https://app.cochat.ai/papers/10.1038/s41467-024-49809-6
The paper
Cheng, Y., Deng, B., Scotland, P., Eddy, L., Hassan, A., Wang, B., Silva, K. J., Li, B., Wyss, K. M., Ucak-Astarlioglu, M. G., Chen, J., Liu, Q., Si, T., Xu, S., Gao, X., JeBailey, K., Jana, D., Torres, M. A., Wong, M. S., . . . Tour, J. M. (2024). Electrothermal mineralization of per- and polyfluoroalkyl substances for soil remediation. Nature Communications. https://doi.org/10.1038/s41467-024-49809-6

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.