Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 135 of the 136 references it cites were found in a registry or an index; 5 of the 119 sources its claims cite were checked for support.

Removal of heavy metal ions from wastewater: a comprehensive and critical review

Open access

Abstract

Abstract Removal of heavy metal ions from wastewater is of prime importance for a clean environment and human health. Different reported methods were devoted to heavy metal ions removal from various wastewater sources. These methods could be classified into adsorption-, membrane-, chemical-, electric-, and photocatalytic-based treatments. This paper comprehensively and critically reviews and discusses these methods in terms of used agents/adsorbents, removal efficiency, operating conditions, and the pros and cons of each method. Besides, the key findings of the previous studies reported in the literature are summarized. Generally, it is noticed that most of the recent studies have focused on adsorption techniques.

Overview

CoChat Summary

TL;DR

This review comprehensively classifies heavy-metal removal from wastewater into adsorption-, membrane-, chemical-, electric-, and photocatalytic-based treatments and compares their efficiencies, operating conditions, and pros/cons. It concludes that adsorption is the most widely studied recent method, while chemical and membrane methods are practical but face sludge, fouling, and post-treatment challenges.

Key findings

  • Adsorption is the most considered method in recent years, with advantages of easy operation, low cost, and high sorption capacity; carbon-based nanoporous adsorbents have surface areas of 500–1500 m²/g.
  • Reported removal efficiencies vary by method: nanofiltration reached 94–98% extraction for Fe³⁺, Al³⁺, Co²⁺, Cd²⁺, Cu²⁺, and humic acid; electrodialysis attained 96.9%, 99.9%, and 99.9% for Ni²⁺, Pb²⁺, and K⁺; reverse osmosis removed >98.75% of Ni²⁺, Cr⁶⁺, and Cu²⁺ from electroplating wastewater; membrane distillation achieved >96% removal of Ca²⁺, Mg²⁺, Fe³⁺, and Fe²⁺ and >99% for As³⁺ and As⁵⁺.
  • Table 2 lists highest adsorption capacities including Pb²⁺ on polyrhodanine/MWCNTs at 8118.0 mg/g, Cu²⁺ on polyvinylpyrrolidone-reduced GO at 1689.0 mg/g, and Cr⁶⁺ on GSC at 2859.0 mg/g.
  • Major obstacles include adsorption’s ability to remove different ion types concurrently, high retention time, and cycling stability; chemical methods’ large-volume sludge and post-treatment needs; membrane fouling/scaling and cleaning costs; and electric- and photocatalytic-based methods being less mature.

Methods

  • Design: comprehensive and critical review of reported heavy-metal removal methods from wastewater, classified into adsorption-, membrane-, chemical-, electric-, and photocatalytic-based treatments.
  • Data: literature studies selected based on availability of operating and performance parameters for each method; details are listed in supplementary tables.
  • Analysis: qualitative comparison of used agents/adsorbents, removal efficiency, operating conditions, and pros and cons, with summary tables and figures.

Limitations

  • The paper states a clear knowledge gap because most studies used synthetic wastewater with one or few metal types; it recommends more research using real wastewater, pilot-scale processes, and cost-effective sustainable materials.
  • The paper notes that disposal of adsorbents after adsorption is a big challenge, MOFs often have low stability in water, and electric/photocatalytic methods remain less mature or laboratory-scale.
  • Evident from the text: as a review, it reports findings from cited studies rather than generating new experimental data, and several performance details depend on supplementary tables not fully reproduced in the main text.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1038/s41545-021-00127-0

Cites

135 of 136 references verified0 citation errors · 1 not checkable

Statistics

Nothing to recompute.

Figures

Fig. 1 Adsorption process used for water treatment. a Heavy metal ions adsorption process; the metal ions of wastewater adhere to the surface of nanoporous adsorbents, which has a high surface area due to its porosity. The adsorption process could be selective for one or more metals than others. The regeneration process could be achieved using a desorbing agent. b Various modi fi cation techniques (i.e., nitrogenation, oxidation, and sulfuration) are used to functionalize carbon with different functional groups. Functionalization enhances adsorption capacity and stability.
Fig. 1 Adsorption process used for water treatment. a Heavy metal ions adsorption process; the metal ions of wastewater adhere to the surface of nanoporous adsorbents, which has a high surface area due to its porosity. The adsorption process could be selective for one or more metals than others. The regeneration process could be achieved using a desorbing agent. b Various modi fi cation techniques (i.e., nitrogenation, oxidation, and sulfuration) are used to functionalize carbon with different functional groups. Functionalization enhances adsorption capacity and stability.CC-BY · From the PDF
Fig. 2 Adsorption process via magnetic adsorption. The magnetic adsorbent particles adsorb the metal ions and sequentially accumulated; thus, the wastewater is treated.
Fig. 2 Adsorption process via magnetic adsorption. The magnetic adsorbent particles adsorb the metal ions and sequentially accumulated; thus, the wastewater is treated.CC-BY · From the PDF
Fig. 3 Different membrane-based treatments for pollutants removal from wastewater and salty water. a nano fi ltration, ultra fi ltration, or reverse osmosis method, b forward osmosis process, c electrodialysis method in which alternative charged positive and negative membranes take place, and d the separation capabilities of different membranes against different pollutants.
Fig. 3 Different membrane-based treatments for pollutants removal from wastewater and salty water. a nano fi ltration, ultra fi ltration, or reverse osmosis method, b forward osmosis process, c electrodialysis method in which alternative charged positive and negative membranes take place, and d the separation capabilities of different membranes against different pollutants.CC-BY · From the PDF
Fig. 4 A simple schematic of the chemical precipitation process. The coagulant is added to wastewater and stirred to trapping metal ions that settle and precipitate to the bottom of the container.
Fig. 4 A simple schematic of the chemical precipitation process. The coagulant is added to wastewater and stirred to trapping metal ions that settle and precipitate to the bottom of the container.CC-BY · From the PDF
Fig. 5 An illustrative schematic of the coagulation- fl occulation treatment process. Coagulation and fl occulation could be either two sequential processes or one process. The sedimentation process could be replaced with fi ltration or another method.
Fig. 5 An illustrative schematic of the coagulation- fl occulation treatment process. Coagulation and fl occulation could be either two sequential processes or one process. The sedimentation process could be replaced with fi ltration or another method.CC-BY · From the PDF
Fig. 6 An illustrative schematic of the fl otation treatment process. Chemicals such as collectors are added to be attached with metal ions and microbubbles, leading to lower density agglomerates fl oated and removed from the top of the treatment column.
Fig. 6 An illustrative schematic of the fl otation treatment process. Chemicals such as collectors are added to be attached with metal ions and microbubbles, leading to lower density agglomerates fl oated and removed from the top of the treatment column.CC-BY · From the PDF
Fig. 7 Electrochemical methods and arrangements used for heavy metals removal. a Different arrangements of electrodes in electrolysis cell (i.e., monopolar electrodes in series (MP-S), monopolar electrodes in parallel (MP-P), and bipolar electrodes in series (BP-S)), b mechanism of the electrochemical reduction method in which positive metal ions are deposited over the cathode, c electrocoagulation process showing the fl otation and precipitation of metal ions, d basic electro fl otation methods -anions are released from anode to combine with cations (metal ions) and then fl oating over the water, e electrochemical oxidation (EO) process ((I) direct EO in which the ions react with OH and precipitate or (II) indirect EO in which mediators are used to forming oxidants that interact with the ions to be removed), and d electro-Fenton process in which OH -is released at anode and reacts with metal ions, and hence wastewater is puri fi ed due to precipitation.
Fig. 7 Electrochemical methods and arrangements used for heavy metals removal. a Different arrangements of electrodes in electrolysis cell (i.e., monopolar electrodes in series (MP-S), monopolar electrodes in parallel (MP-P), and bipolar electrodes in series (BP-S)), b mechanism of the electrochemical reduction method in which positive metal ions are deposited over the cathode, c electrocoagulation process showing the fl otation and precipitation of metal ions, d basic electro fl otation methods -anions are released from anode to combine with cations (metal ions) and then fl oating over the water, e electrochemical oxidation (EO) process ((I) direct EO in which the ions react with OH and precipitate or (II) indirect EO in which mediators are used to forming oxidants that interact with the ions to be removed), and d electro-Fenton process in which OH -is released at anode and reacts with metal ions, and hence wastewater is puri fi ed due to precipitation.CC-BY · From the PDF
Image 8
CC-BY · From the PDF
Fig. 9 A general comparison between the typical methods used for heavy metals removal from wastewater. The compared methods are adsorption-, membrane-, chemical-, electric-, and photocatalytic-based in terms of cost-effective, technical maturity, environment friendly, and automaticity, based on the above discussion and the reported studies in the literature 51,113,131,133 -137 . The electric- and chemical-based methods are represented here for chemical precipitation and electrochemical processes, respectively 133 .
Fig. 9 A general comparison between the typical methods used for heavy metals removal from wastewater. The compared methods are adsorption-, membrane-, chemical-, electric-, and photocatalytic-based in terms of cost-effective, technical maturity, environment friendly, and automaticity, based on the above discussion and the reported studies in the literature 51,113,131,133 -137 . The electric- and chemical-based methods are represented here for chemical precipitation and electrochemical processes, respectively 133 .CC-BY · From the PDF

Verification

Claims the paper makes

5 Valid · 9 Not valid · 107 Not checked · 47 Own results and interpretations

70 more claims

Create a free account to see all 168 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 72
  • Probably not a substantial claim. 36

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

3 of 3

Cited works that were retracted

Works this paper cites that were later retracted, from the retraction notices publishers deposit. Major when the notice came out before this paper was published.

1 of 1

Citations

Cites

1 retracted

Show all 136 references

Research works printed but not linked: 3

  1. Al-Hemaidi, W. K. Approach in choosing suitable technology for industrial wastewater. J. Civil & Envir. Eng. 2, 1000123 (2012).
  2. Pretorius, W. A., Johannes, W. G. & Lempert, G. G. Electrolytic iron flocculant production with a bipolar electrode in series arrangement. Water SA 17, 133–138 (1991).
  3. WHO. Guidelines for drinking-water quality: Fourthedition incorporating the first addendum. Guidelines for Drinking-Water Quality: Fourth Edition Incorporating the First Addendum (2014).

Cited by

See all 2,225

Metadata

Authors
Qasem, N. A. A., Mohammed, R. H., & Lawal, D. U.
Affiliations
  • King Fahd University of Petroleum and Minerals (SA)
  • Zagazig University (EG)
Corresponding author
Qasem, Naef A. A.
Venue
npj Clean Water
Published
2021-07-08
Volume
4
Issue
1
ISSN
2059-7037 (ISSN-L)
OpenAlex
W3180677679
Cited by
2,225
References
136
Citations by year
2026: 372 · 2025: 566 · 2024: 611 · 2023: 410 · 2022: 235 · 2021: 30
FWCI
95.69
Type
journal article
Language
en
Open access
Licence
Locations
  • npj Clean Water (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Greater South Information System
Funders
King Fahd University of Petroleum and Minerals
Topics
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Environmental Science › Water Science and Technology › Heavy Metal Pollution Remediation
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental remediation with nanomaterials
Keywords
heavy metal removal, wastewater treatment, adsorption, membrane separation, electrochemical treatment, photocatalysis, chemical precipitation, membrane fouling, sludge production

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Removal of heavy metal ions from wastewater: a comprehensive and critical review. https://app.cochat.ai/papers/10.1038/s41545-021-00127-0
The paper
Qasem, N. A. A., Mohammed, R. H., & Lawal, D. U. (2021). Removal of heavy metal ions from wastewater: a comprehensive and critical review. npj Clean Water. https://doi.org/10.1038/s41545-021-00127-0

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.