The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Programming shape using kirigami tessellations
Open accessAbstract
Kirigami tessellations, regular planar patterns formed by partially cutting flat, thin sheets, allow compact shapes to morph into open structures with rich geometries and unusual material properties. However, geometric and topological constraints make the design of such structures challenging. Here we pose and solve the inverse problem of determining the number, size and orientation of cuts that enables the deployment of a closed, compact regular kirigami tessellation to conform approximately to any prescribed target shape in two or three dimensions. We first identify the constraints on the lengths and angles of generalized kirigami tessellations that guarantee that their reconfigured face geometries can be contracted from a non-trivial deployed shape to a compact, non-overlapping planar cut pattern. We then encode these conditions into a flexible constrained optimization framework to obtain generalized kirigami patterns derived from various periodic tesselations of the plane that can be deployed into a wide variety of prescribed shapes. A simple mechanical analysis of the resulting structure allows us to determine and control the stability of the deployed state and control the deployment path. Finally, we fabricate physical models that deploy in two and three dimensions to validate this inverse design approach. Altogether, our approach, combining geometry, topology and optimization, highlights the potential for generalized kirigami tessellations as building blocks for shape-morphing mechanical metamaterials. Geometric analysis and constrained optimization algorithms allow for the design of kirigami patterns that can be deployed into any two- or three-dimensional shape.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Blees, M. K., Barnard, A. W., Rose, P. A., Roberts, S. P., McGill, K. L., Huang, P. Y., Ruyack, A. R., Kevek, J. W., Kobrin, B., Muller, D. A., et al. (2015) · Nature · doi:10.1038/nature14588 · Cited by 891
Auxetic behavior from rotating squares
Grima, J. N., & Evans, K. E. (2000) · Journal of Materials Science Letters · doi:10.1023/a:1006781224002 · Cited by 890
Auxetic mechanical metamaterials
Kolken, H. M. A., & Zadpoor, A. A. (2017) · RSC Advances · doi:10.1039/c6ra27333e · Cited by 788
A kirigami approach to engineering elasticity in nanocomposites through patterned defects
Shyu, T. C., Damasceno, P. F., Dodd, P. M., Lamoureux, A., Xu, L., Shlian, M., Shtein, M., Glotzer, S. C., & Kotov, N. A. (2015) · Nature Materials · doi:10.1038/nmat4327 · Cited by 681
A mechanically driven form of Kirigami as a route to 3D mesostructures in micro/nanomembranes
Zhang, Y., Yan, Z., Nan, K., Xiao, D., Liu, Y., Luan, H., Fu, H., Wang, X., Yang, Q., Wang, J., et al. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1515602112 · Cited by 535
Programming curvature using origami tessellations
Dudte, L. H., Vouga, E., Tachi, T., & Mahadevan, L. (2016) · Nature Materials · doi:10.1038/nmat4540 · Cited by 486
Self-citationBistable auxetic mechanical metamaterials inspired by ancient geometric motifs
Rafsanjani, A., & Pasini, D. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.09.001 · Cited by 476
Rafsanjani, A., & Bertoldi, K. (2017) · Physical Review Letters · doi:10.1103/physrevlett.118.084301 · Cited by 309
Hierarchical Auxetic Mechanical Metamaterials
Gatt, R., Mizzi, L., Azzopardi, J. I., Azzopardi, K. M., Attard, D., Casha, A., Briffa, J., & Grima, J. N. (2015) · Scientific Reports · doi:10.1038/srep08395 · Cited by 304
Tang, Y., & Yin, J. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.07.005 · Cited by 267
Cited by
Flexible Metamaterial Electronics
Jiang, S., Liu, X., Liu, J., Ye, D., Duan, Y., Li, K., Yin, Z., & Huang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202200070 · Cited by 332
Responsive materials architected in space and time
Xia, X., Spadaccini, C. M., & Greer, J. R. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00450-z · Cited by 295
A dynamically reprogrammable surface with self-evolving shape morphing
Bai, Y., Wang, H., Xue, Y., Pan, Y., Kim, J.-T., Ni, X., Liu, T.-L., Yang, Y., Han, M., Huang, Y., et al. (2022) · Nature · doi:10.1038/s41586-022-05061-w · Cited by 168
Flexible Metasurfaces for Multifunctional Interfaces
Zhou, Y., Wang, S., Yin, J., Wang, J., Manshaii, F., Xiao, X., Zhang, T., Bao, H., Jiang, S., & Chen, J. (2024) · ACS Nano · doi:10.1021/acsnano.3c09310 · Cited by 115
Passively addressed robotic morphing surface (PARMS) based on machine learning
Wang, J., Sotzing, M., Lee, M., & Chortos, A. (2023) · Science Advances · doi:10.1126/sciadv.adg8019 · Cited by 26
Metadata
- Authors
- Choi, G. P. T., Dudte, L. H., & Mahadevan, L.
- Venue
- Nature Materials
- Published
- 2019-08-19
- Volume
- 18
- Issue
- 9
- Pages
- 999-1004
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2969211246
- Cited by
- 332
- References
- 15
- FWCI
- 17.03
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Programming shape using kirigami tessellations. https://app.cochat.ai/papers/10.1038/s41563-019-0452-y
- The paper
- Choi, G. P. T., Dudte, L. H., & Mahadevan, L. (2019). Programming shape using kirigami tessellations. Nature Materials. https://doi.org/10.1038/s41563-019-0452-y
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.