A 2D ferroelectric vortex pattern in twisted BaTiO3 freestanding layers
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The wealth of complex polar topologies 1–10 recently found in nanoscale ferroelectrics results from a delicate balance between the intrinsic tendency of the materials to develop a homogeneous polarization and the electric and mechanical boundary conditions imposed on them. Ferroelectric–dielectric interfaces are model systems in which polarization curling originates from open circuit-like electric boundary conditions, to avoid the build-up of polarization charges through the formation of flux-closure 11–14 domains that evolve into vortex-like structures at the nanoscale 15–17 level. Although ferroelectricity is known to couple strongly with strain (both homogeneous 18 and inhomogeneous 19,20 ), the effect of mechanical constraints 21 on thin-film nanoscale ferroelectrics has been comparatively less explored because of the relative paucity of strain patterns that can be implemented experimentally. Here we show that the stacking of freestanding ferroelectric perovskite layers with controlled twist angles provides an opportunity to tailor these topological nanostructures in a way determined by the lateral strain modulation associated with the twisting. Furthermore, we find that a peculiar pattern of polarization vortices and antivortices emerges from the flexoelectric coupling of polarization to strain gradients. This finding provides opportunities to create two-dimensional high-density vortex crystals that would enable us to explore previously unknown physical effects and functionalities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Super-elastic ferroelectric single-crystal membrane with continuous electric dipole rotation
Dong, G., Li, S., Yao, M., Zhou, Z., Zhang, Y.-Q., Han, X., Luo, Z., Yao, J., Peng, B., Hu, Z., et al. (2019) · Science · doi:10.1126/science.aay7221 · Cited by 475 · cited 1×
“The recent reports on the fabrication of freestanding single crystalline oxide thin films 28–30 showing exciting ferroelectric topologies 31,32 , and which can be handled in a way similar to van der Waals two-dimensional (2D) materials 33 , open up the possibility of stacking freestanding layers…”
Background
Cited by
Direct FFT oversampling without zero-padding
Donciu, C., Temneanu, M. C., & Serea, E. (2025) · Scientific Reports · doi:10.1038/s41598-025-21270-5 · Cited by 3
Metadata
- Authors
- Sánchez-Santolino, G., Rouco, V., Puebla, S., Aramberri, H., Zamora, V., Cabero, M., Cuellar, F. A., Munuera, C., Mompean, F., Garcia-Hernandez, M., Castellanos-Gomez, A., Íñiguez, J., Leon, C., & Santamaria, J.
- Venue
- Nature
- Published
- 2024-02-14
- Volume
- 626
- Issue
- 7999
- Pages
- 529-534
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W4391809284
- Cited by
- 189
- References
- 1
- FWCI
- 17.85
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A 2D ferroelectric vortex pattern in twisted BaTiO3 freestanding layers. https://app.cochat.ai/papers/10.1038/s41586-023-06978-6
- The paper
- Sánchez-Santolino, G., Rouco, V., Puebla, S., Aramberri, H., Zamora, V., Cabero, M., Cuellar, F. A., Munuera, C., Mompean, F., Garcia-Hernandez, M., Castellanos-Gomez, A., Íñiguez, J., Leon, C., & Santamaria, J. (2024). A 2D ferroelectric vortex pattern in twisted BaTiO3 freestanding layers. Nature. https://doi.org/10.1038/s41586-023-06978-6
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.