The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
3D printable elastomers with exceptional strength and toughness
Open accessAbstract
Three-dimensional (3D) printing has emerged as an attractive manufacturing technique because of its exceptional freedom in accessing geometrically complex customizable products. Its potential for mass manufacturing, however, is hampered by its low manufacturing efficiency (print speed) and insufficient product quality (mechanical properties). Recent progresses in ultra-fast 3D printing of photo-polymers1–5 have alleviated the issue of manufacturing efficiency, but the mechanical performance of typical printed polymers still falls far behind what is achievable with conventional processing techniques. This is because of the printing requirements that restrict the molecular design towards achieving high mechanical performance. Here we report a 3D photo-printable resin chemistry that yields an elastomer with tensile strength of 94.6 MPa and toughness of 310.4 MJ m−3, both of which far exceed that of any 3D printed elastomer6–10. Mechanistically, this is achieved by the dynamic covalent bonds in the printed polymer that allow network topological reconfiguration. This facilitates the formation of hierarchical hydrogen bonds (in particular, amide hydrogen bonds), micro-phase separation and interpenetration architecture, which contribute synergistically to superior mechanical performance. Our work suggests a brighter future for mass manufacturing using 3D printing. Three-dimensional photo-printable resin chemistry yields an elastomer with tensile strength of 94.6 MPa and toughness of 310.4 MJ m−3, both of which far exceed that of any three-dimensional printed elastomer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Markvicka, E. J., Bartlett, M. D., Huang, X., & Majidi, C. (2018) · Nature Materials · doi:10.1038/s41563-018-0084-7 · Cited by 1,067
A universal interface for plug-and-play assembly of stretchable devices
Jiang, Y., Ji, S., Sun, J., Huang, J., Li, Y., Zou, G., Salim, T., Wang, C., Li, W., Jin, H., et al. (2023) · Nature · doi:10.1038/s41586-022-05579-z · Cited by 422
High-throughput, single-microbe genomics with strain resolution, applied to a human gut microbiome
Zheng, W., Zhao, S., Yin, Y., Zhang, H., Needham, D. M., Evans, E. D., Dai, C. L., Lu, P. J., Alm, E. J., & Weitz, D. A. (2022) · Science · doi:10.1126/science.abm1483 · Cited by 283 · cited 1×
“Furthermore, they have gained increasing traction in emerging areas such as microfluidics 11 , soft robotics 12,13 , wearable electronics 14,15 and medical devices 16 .”
Rapid digital light 3D printing enabled by a soft and deformable hydrogel separation interface
Wu, J., Guo, J., Linghu, C., Lu, Y., Song, J., Xie, T., & Zhao, Q. (2021) · Nature Communications · doi:10.1038/s41467-021-26386-6 · Cited by 109 · cited 1×
“Recent progresses in ultra-fast 3D printing of photo-polymers 1–5 have alleviated the issue of manufacturing efficiency, but the mechanical performance of typical printed polymers still falls far behind what is achievable with conventional processing techniques.”
Self-citation
Cited by
Lyu, J., Jeong, C., Jo, J. Y., Heo, N. J., Park, Y. I., Jung, H., Bae, H. E., Le, H. D., Jin, Y.-J., Jeong, J.-E., et al. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c12906
Metadata
- Authors
- Fang, Z., Mu, H., Sun, Z., Zhang, K., Zhang, A., Chen, J., Zheng, N., Zhao, Q., Yang, X., Liu, F., Wu, J., & Xie, T.
- Venue
- Nature
- Published
- 2024-07-03
- Volume
- 631
- Issue
- 8022
- Pages
- 783-788
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W4400279488
- Cited by
- 190
- References
- 5
- FWCI
- 19.87
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D printable elastomers with exceptional strength and toughness. https://app.cochat.ai/papers/10.1038/s41586-024-07588-6
- The paper
- Fang, Z., Mu, H., Sun, Z., Zhang, K., Zhang, A., Chen, J., Zheng, N., Zhao, Q., Yang, X., Liu, F., Wu, J., & Xie, T. (2024). 3D printable elastomers with exceptional strength and toughness. Nature. https://doi.org/10.1038/s41586-024-07588-6
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.