The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index; none of the 28 sources its claims cite is checked for support yet.
ICESat-2 river surface slope (IRIS): A global reach-scale water surface slope dataset
Open accessAbstract
The global reach-scale “ICESat-2 River Surface Slope” (IRIS) dataset comprises average and extreme water surface slopes (WSS) derived from ICESat-2 observations between October 2018 and August 2022 as a supplement to 121,583 reaches from the “SWOT Mission River Database” (SWORD). To gain full advantage of ICESat-2’s unique measurement geometry with six parallel lidar beams, the WSS is determined across pairs of beams or along individual beams, depending on the intersection angle of spacecraft orbit and river centerline. Combining both approaches maximizes spatial and temporal coverage. IRIS can be used to research river dynamics, estimate river discharge, and correct water level time series from satellite altimetry for shifting ground tracks. Additionally, by referencing SWORD as a common database, IRIS may be used in combination with observations from the recently launched SWOT mission.
Overview
CoChat Summary
TL;DR
IRIS is a global reach-scale water surface slope (WSS) dataset derived from ICESat-2 ATL13 observations (October 2018–August 2022) and referenced to 121,583 SWORD reaches. It combines across-track and along-track slope estimates to maximize spatial and temporal coverage and is intended for river dynamics, discharge estimation, altimetry correction, and combination with SWOT.
Key findings
- IRIS v1 provides average and extreme WSS for 121,583 SWORD reaches; 178,659 (74.1%) of the 241,107 SWORD reaches passed the type filter, and results cover 68.1% of those processed reaches.
- Regional validation at 815 reaches gave a median absolute error of 23 mm/km for the combined slope, 19 mm/km for across-track, and 47 mm/km for along-track.
- Comparison with SWORD WSS from MERIT Hydro gave an overall correlation of r = 0.73; basin-scale r > 0.50 for 580 (72%) of 808 basins with more than 5 covered reaches, with mean bias 149 mm/km (range −657 to 4,774 mm/km) and overall RMSD after bias subtraction of 1,514 mm/km.
- The 99th percentile of `avg_combined_slope` is 8,237 mm/km and the 1st percentile is 3 mm/km; 16,754 (9.4%) processed reaches lack ATL13 data, and braided rivers show larger temporal WSS variation than meandering rivers, especially at widths below 171 m.
Methods
- IRIS v1 supplements SWORD v2 and uses ICESat-2 ATL13 version 5 data from cycles 1–16 (October 2018–August 2022); reach areas of interest are buffered by average SWORD width, with cloud/ice flags and outlier rejection via ADM and linear support vector regression.
- WSS is estimated either across-track between multiple beam crossings when the orbit is nearly perpendicular to the river, or along-track from a linear fit to ATL13 water surface elevations projected onto the river centerline when the orbit is nearly parallel; the two daily time series are merged, preferring across-track results on overlapping dates.
- Validation and assessment include prior regional gauge validation, comparison to SWORD/MERIT Hydro WSS, HydroATLAS basin classifications, MODIS cloud coverage, and river morphology groupings.
Limitations
- The paper states that global validation is not feasible, DEM data cannot validate accuracy, the SRTM and ICESat-2 inputs span an 18-year gap, and bias is expected because ICESat-2 has better vertical accuracy than the MERIT DEM used for SWORD WSS.
- The paper states that IRIS is fully automatic and depends on ATL13 availability/quality/flags and SWORD centerline, topology, and type accuracy, so isolated outliers cannot be excluded (e.g., missing dams in SWORD); aggregated min/max/std parameters become less meaningful with few observation days.
- Evident from the text: coverage is incomplete (68.1% of processed reaches; 9.4% of processed reaches missing ATL13 data), with below-average coverage in parts of the Lena and Indus Rivers, Western Europe, East Asia, and the Pacific coast of South America, partly due to cloud cover limiting ATLAS lidar observations.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures

















Verification
Claims the paper makes
0 Valid · 1 Not valid · 24 Not checked · 40 Own results and interpretations
A check of a cited source is scheduled, or we don’t hold its full text yet; the claim is checked once it runs.
In the paper
“For 89% of those reaches, the approach could be used to estimate WSS with a median absolute error of 23 mm/km, almost complying with the SWOT requirements of 17 mm/km.”
- Also stated in: § Technical Validation · plain
“The approach was validated at 815 reaches in a regional study2 with a median absolute error (MAE) of 23 mm/km for the “avg_combined_slope” compared to gauge data.”
§ ICESat-2 river surface slope (IRIS): A global reach-scale water surface slope dataset > Background & Summary
What the sources say
- Not checked yetcites [2] Scherer, D., Schwatke, C., Dettmering, D. & Seitz, F. ICESat-2 based river surface slope and its impact on water level time series from satellite altimetry. Water Resources Research 58, e2022WR032842, https://doi.org/10.1029/2022WR032842 (2022). source
A check is scheduled.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § Technical Validation · plain
A check of a cited source is scheduled, or we don’t hold its full text yet; the claim is checked once it runs.
In the paper
“For 89% of those reaches, the approach could be used to estimate WSS with a median absolute error of 23 mm/km, almost complying with the SWOT requirements of 17 mm/km.”
§ ICESat-2 river surface slope (IRIS): A global reach-scale water surface slope dataset > Background & Summary
What the sources say
- Not checked yetcites [2] Scherer, D., Schwatke, C., Dettmering, D. & Seitz, F. ICESat-2 based river surface slope and its impact on water level time series from satellite altimetry. Water Resources Research 58, e2022WR032842, https://doi.org/10.1029/2022WR032842 (2022). source
A check is scheduled.
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not checked yet
A check of a cited source is scheduled, or we don’t hold its full text yet; the claim is checked once it runs.
In the paper
“The energy of the beams used to estimate the WSS has no significant influence on the WSS accuracy2.”
§ ICESat-2 river surface slope (IRIS): A global reach-scale water surface slope dataset > Methods > Ice, cloud, and land elevation satellite 2 (ICESat-2)
What the sources say
- Not checked yetcites [2] Scherer, D., Schwatke, C., Dettmering, D. & Seitz, F. ICESat-2 based river surface slope and its impact on water level time series from satellite altimetry. Water Resources Research 58, e2022WR032842, https://doi.org/10.1029/2022WR032842 (2022). source
A check is scheduled.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not checked yet
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Overall, 16,754 (9.4%) of the processed reaches are not covered by ATL13 data.”
§ ICESat-2 river surface slope (IRIS): A global reach-scale water surface slope dataset > Technical Validation
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Discontinuities can be observed primarily in basins influenced by human intervention.”
§ ICESat-2 river surface slope (IRIS): A global reach-scale water surface slope dataset > Technical Validation
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
31 more claims
Create a free account to see all 65 claims and to verify the 28 references still open.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 11
Citations
Cites
Mapping the world’s free-flowing rivers
Grill, G., Lehner, B., Thieme, M., Geenen, B., Tickner, D., Antonelli, F., Babu, S., Borrelli, P., Cheng, L., Crochetiere, H., et al. (2019) · Nature · doi:10.1038/s41586-019-1111-9 · Cited by 2,473
Lehner, B., & Grill, G. (2013) · Hydrological Processes · doi:10.1002/hyp.9740 · Cited by 2,193
Abell, R., Thieme, M. L., Revenga, C., Bryer, M., Kottelat, M., Bogutskaya, N., Coad, B., Mandrak, N., Balderas, S. C., Bussing, W., et al. (2008) · BioScience · doi:10.1641/b580507 · Cited by 2,045
MERIT Hydro: A High‐Resolution Global Hydrography Map Based on Latest Topography Dataset
Yamazaki, D., Ikeshima, D., Sosa, J., Bates, P. D., Allen, G. H., & Pavelsky, T. M. (2019) · Water Resources Research · doi:10.1029/2019wr024873 · Cited by 1,392
A High-Accuracy Map of Global Terrain Elevations
Yamazaki, D., Ikeshima, D., Tawatari, R., Yamaguchi, T., O'Loughlin, F., Neal, J. C., Sampson, C. C., Kanae, S., & Bates, P. D. (2017) · Geophysical Research Letters · doi:10.1002/2017gl072874 · Cited by 1,326
Markus, T., Neumann, T., Martino, A., Abdalati, W., Brunt, K., Csatho, B., Farrell, S., Fricker, H., Gardner, A., Harding, D., et al. (2017) · Remote Sensing of Environment · doi:10.1016/j.rse.2016.12.029 · Cited by 1,215
A Global Assessment of the SRTM Performance
Rodríguez, E., Morris, C. S., & Belz, J. E. (2006) · Photogrammetric Engineering & Remote Sensing · doi:10.14358/pers.72.3.249 · Cited by 1,106
Global extent of rivers and streams
Allen, G. H., & Pavelsky, T. M. (2018) · Science · doi:10.1126/science.aat0636 · Cited by 970
Global hydro-environmental sub-basin and river reach characteristics at high spatial resolution
Linke, S., Lehner, B., Ouellet Dallaire, C., Ariwi, J., Grill, G., Anand, M., Beames, P., Burchard-Levine, V., Maxwell, S., Moidu, H., et al. (2019) · Scientific Data · doi:10.1038/s41597-019-0300-6 · Cited by 831
Neumann, T. A., Martino, A. J., Markus, T., Bae, S., Bock, M. R., Brenner, A. C., Brunt, K. M., Cavanaugh, J., Fernandes, S. T., Hancock, D. W., et al. (2019) · Remote Sensing of Environment · doi:10.1016/j.rse.2019.111325 · Cited by 630
Cited by
Reconstructing Tibetan Plateau lake bathymetry using ICESat-2 photon-counting laser altimetry
Han, X., Zhang, G., Wang, J., Tseng, K., Li, J., Woolway, R. I., Shum, C. K., & Xu, F. (2024) · Remote Sensing of Environment · doi:10.1016/j.rse.2024.114458 · Cited by 45
Normandin, C., Frappart, F., Baghdadi, N., Bourrel, L., Peña Luque, S., Ygorra, B., Kitambo, B., Papa, F., Riazanoff, S., & Wigneron, J.-P. (2024) · Frontiers in Remote Sensing · doi:10.3389/frsen.2024.1466695 · Cited by 31
Hydraulic River Models From ICESat‐2 Elevation and Water Surface Slope
Musaeus, A. F., Kittel, C. M. M., Luchner, J., Frías, M. C., & Bauer‐Gottwein, P. (2024) · Water Resources Research · doi:10.1029/2023wr036428 · Cited by 29
Scherer, D., Schwatke, C., Dettmering, D., & Seitz, F. (2024) · Remote Sensing of Environment · doi:10.1016/j.rse.2024.114434 · Cited by 26
Self-citationSatellite Requirements to Capture Water Propagation in Earth's Rivers
Cerbelaud, A., David, C. H., Pavelsky, T., Biancamaria, S., Garambois, P. ‐., Kittel, C., Papa, F., Bates, P., Tourian, M. J., Durand, M., et al. (2025) · Reviews of Geophysics · doi:10.1029/2024rg000871 · Cited by 25
Self-citation
Metadata
- Authors
- Scherer, D., Schwatke, C., Dettmering, D., & Seitz, F.
- Affiliations
- Technical University of Munich (DE)
- Corresponding author
- Scherer, Daniel
- Venue
- Scientific Data
- Published
- 2023-06-06
- Volume
- 10
- Issue
- 1
- Pages
- 359-359
- ISSN
- 2052-4463 (ISSN-L)
- PMC
- PMC10244387
- OpenAlex
- W4379534517
- Cited by
- 31
- References
- 33
- Citations by year
- 2026: 12 · 2025: 8 · 2024: 11
- Type
- data paper
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Scientific Data (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- mediaTUM (Technical University of Munich) (submittedVersion, cc-by)
- Funders
- Deutsche Forschungsgemeinschaft (2174/10-2)
- Open access funding enabled and organized by Projekt DEAL
- Topics
- Physical Sciences › Environmental Science › Water Science and Technology › Hydrology and Watershed Management Studies
- Physical Sciences › Environmental Science › Global and Planetary Change › Flood Risk Assessment and Management
- Life Sciences › Agricultural and Biological Sciences › Forestry › Remote Sensing and LiDAR Applications
- Keywords
- water surface slope, river reaches, ICESat-2, spaceborne lidar, river discharge estimation, river dynamics, global rivers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-11-18, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-11-18 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: ICESat-2 river surface slope (IRIS): A global reach-scale water surface slope dataset. https://app.cochat.ai/papers/10.1038/s41597-023-02215-x
- The paper
- Scherer, D., Schwatke, C., Dettmering, D., & Seitz, F. (2023). ICESat-2 river surface slope (IRIS): A global reach-scale water surface slope dataset. Scientific Data. https://doi.org/10.1038/s41597-023-02215-x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.