Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.

A study of the influence of measurement timescale on internal resistance characterisation methodologies for lithium-ion cells

Open access

Abstract

The power capability of a lithium ion battery is governed by its resistance, which changes with battery state such as temperature, state of charge, and state of health. Characterizing resistance, therefore, is integral in defining battery operational boundaries, estimating its performance and tracking its state of health. There are many techniques that have been employed for estimating the resistance of a battery, these include: using DC pulse current signals such as pulse power tests or Hybrid Pulse Power Characterization (HPPC) tests; using AC current signals, i.e., electrochemical impedance spectroscopy (EIS) and using pulse-multisine measurements. From existing literature, these techniques are perceived to yield differing values of resistance. In this work, we apply these techniques to 20 Ah LiFePO 4 /C 6 pouch cells and use the results to compare the techniques. The results indicate that the computed resistance is strongly dependent on the timescales of the technique employed and that when timescales match, the resistances derived via different techniques align. Furthermore, given that EIS is a perturbative characterisation technique, employing a spectrum of perturbation frequencies, we show that the resistance estimated from any technique can be identified – to a high level of confidence – from EIS by matching their timescales.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41598-017-18424-5

Cites

31 of 31 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Cell voltage response to a pulse current.
Figure 1 Cell voltage response to a pulse current.CC BY · PubMed Central
Figure 2 Typical Nyquist plot of a new li-ion battery cell (a), and an mth order ECM (b). The series resistor R0 denotes the internal resistance and the m RC pairs denote the dynamic model parameters.
Figure 2 Typical Nyquist plot of a new li-ion battery cell (a), and an mth order ECM (b). The series resistor R0 denotes the internal resistance and the m RC pairs denote the dynamic model parameters.CC BY · PubMed Central
Figure 3 Voltage response to 18 second (a) discharge pulse and (b) charge pulse. Resistance calculated for pulse duration are shown in (c) for discharge and (d) for charge. In subplots (c) and (d), (i), (ii) and (iii) refer to pure Ohmic resistance R0, charge transfer resistance RCT and polarization resistance Rp, respectively. The overlap between (ii) and (iii) is indicative of the inability, within this technique, of precisely discerning each contribution.
Figure 3 Voltage response to 18 second (a) discharge pulse and (b) charge pulse. Resistance calculated for pulse duration are shown in (c) for discharge and (d) for charge. In subplots (c) and (d), (i), (ii) and (iii) refer to pure Ohmic resistance R0, charge transfer resistance RCT and polarization resistance Rp, respectively. The overlap between (ii) and (iii) is indicative of the inability, within this technique, of precisely discerning each contribution.CC BY · PubMed Central
Figure 4 Voltage response to switching current from (a) 5 C discharge to 5 C charge, (b) 1 C discharge to 5 C discharge, (c) 1 C charge to 5 C charge, and (d) pure Ohmic resistance calculated from switching edge.
Figure 4 Voltage response to switching current from (a) 5 C discharge to 5 C charge, (b) 1 C discharge to 5 C discharge, (c) 1 C charge to 5 C charge, and (d) pure Ohmic resistance calculated from switching edge.CC BY · PubMed Central
Figure 5 EIS results from 100 kHz to 10 mHz with different signal amplitudes (a) Nyquist plot and (b) Bode plot of same data. Inset (a) a zoomed view of the central part is shown.
Figure 5 EIS results from 100 kHz to 10 mHz with different signal amplitudes (a) Nyquist plot and (b) Bode plot of same data. Inset (a) a zoomed view of the central part is shown.CC BY · PubMed Central
Figure 6 (a) Magnitude and (b) phase response of the estimated resistance via the LPM using a pulse-multisine signal and a fitted 2nd order ECM model.
Figure 6 (a) Magnitude and (b) phase response of the estimated resistance via the LPM using a pulse-multisine signal and a fitted 2nd order ECM model.CC BY · PubMed Central
Figure 7 (a) Comparison of resistance values measured by different techniques. (b) Total resistance vs timescale plot showing resistance values agree when timescales match, irrespective to the measurement technique employed.
Figure 7 (a) Comparison of resistance values measured by different techniques. (b) Total resistance vs timescale plot showing resistance values agree when timescales match, irrespective to the measurement technique employed.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 31 references

Research works printed but not linked: 2

  1. Omar, N. Assessment of rechargeable energy storage systems for plug-in hybrid electric vehicles Ph.D. thesis, Vrije Universiteit Brussel, Brussel, Belgium, (2012).
  2. Kowal, J. Spatially-resolved impedance of nonlinear inhomogeneous devices - using the example of lead-acid batteries PhD thesis, RWTH Aachen University, (2010).

Cited by

See all 294

Metadata

Authors
Barai, A., Uddin, K., Widanage, W. D., McGordon, A., & Jennings, P.
Affiliations
University of Warwick (GB)
Corresponding author
Barai, Anup
Venue
Scientific Reports
Published
2018-01-08
Volume
8
Issue
1
Pages
21-21
ISSN
2045-2322 (ISSN-L)
OpenAlex
W2771809323
Cited by
276
References
31
Citations by year
2026: 36 · 2025: 51 · 2024: 40 · 2023: 39 · 2022: 35 · 2021: 39 · 2020: 16 · 2019: 13 · 2018: 7
FWCI
9.96
Type
journal article
Language
en
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Warwick Research Archive Portal (University of Warwick) (acceptedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Funders
  • Jaguar Land Rover
  • High Value Manufacturing Catapult
  • Engineering and Physical Sciences Research Council (EP/N001745/1, EP/M507143/1)
  • Innovate UK
Topics
  • Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
  • Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
Keywords
lithium-ion batteries, internal resistance, electrochemical impedance spectroscopy, hybrid pulse power characterization, state of health estimation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A study of the influence of measurement timescale on internal resistance characterisation methodologies for lithium-ion cells. https://app.cochat.ai/papers/10.1038/s41598-017-18424-5
The paper
Barai, A., Uddin, K., Widanage, W. D., McGordon, A., & Jennings, P. (2018). A study of the influence of measurement timescale on internal resistance characterisation methodologies for lithium-ion cells. Scientific Reports. https://doi.org/10.1038/s41598-017-18424-5

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.