The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Adaptive Genetic Algorithm for Optical Metasurfaces Design
Open accessAbstract
As optical metasurfaces become progressively ubiquitous, the expectations from them are becoming increasingly complex. The limited number of structural parameters in the conventional metasurface building blocks, and existing phase engineering rules do not completely support the growth rate of metasurface applications. In this paper, we present digitized-binary elements, as alternative high-dimensional building blocks, to accommodate the needs of complex-tailorable-multifunctional applications. To design these complicated platforms, we demonstrate adaptive genetic algorithm (AGA), as a powerful evolutionary optimizer, capable of handling such demanding design expectations. We solve four complex problems of high current interest to the optics community, namely, a binary-pattern plasmonic reflectarray with high tolerance to fabrication imperfections and high reflection efficiency for beam-steering purposes, a dual-beam aperiodic leaky-wave antenna, which diffracts TE and TM excitation waveguides modes to arbitrarily chosen directions, a compact birefringent all-dielectric metasurface with finer pixel resolution compared to canonical nano-antennas, and a visible-transparent infrared emitting/absorbing metasurface that shows high promise for solar-cell cooling applications, to showcase the advantages of the combination of binary-pattern metasurfaces and the AGA technique. Each of these novel applications encounters computational and fabrication challenges under conventional design methods, and is chosen carefully to highlight one of the unique advantages of the AGA technique. Finally, we show that large surplus datasets produced as by-products of the evolutionary optimizers can be employed as ingredients of the new-age computational algorithms, such as, machine learning and deep leaning. In doing so, we open a new gateway of predicting the solution to a problem in the fastest possible way based on statistical analysis of the datasets rather than researching the whole solution space.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Flat optics with designer metasurfaces
Yu, N., & Capasso, F. (2014) · Nature Materials · doi:10.1038/nmat3839 · Cited by 5,984
Metasurface Holograms for Visible Light
Ni, X., Kildishev, A. V., & Shalaev, V. M. (2013) · Nature Communications · doi:10.1038/ncomms3807 · Cited by 1,513
Multiwavelength Achromatic Metasurfaces by Dispersive Phase Compensation
Aieta, F., Kats, M. A., Genevet, P., & Capasso, F. (2015) · Science · doi:10.1126/science.aaa2494 · Cited by 1,115
Topology-Optimized Multilayered Metaoptics
Lin, Z., Groever, B., Capasso, F., Rodriguez, A. W., & Lončar, M. (2018) · Physical Review Applied · doi:10.1103/physrevapplied.9.044030 · Cited by 203
Cited by
Deep learning enabled inverse design in nanophotonics
So, S., Badloe, T., Noh, J., Rho, J., & Bravo‐Abad, J. (2020) · Nanophotonics · doi:10.1515/nanoph-2019-0474 · Cited by 564
Review of numerical optimization techniques for meta-device design [Invited]
Campbell, S. D., Sell, D., Jenkins, R. P., Whiting, E. B., Fan, J. A., & Werner, D. H. (2019) · Optical Materials Express · doi:10.1364/ome.9.001842 · Cited by 322
Empowering Metasurfaces with Inverse Design: Principles and Applications
Li, Z., Pestourie, R., Lin, Z., Johnson, S. G., & Capasso, F. (2022) · ACS Photonics · doi:10.1021/acsphotonics.1c01850 · Cited by 283
Meta-atom library generation via an efficient multi-objective shape optimization method
Whiting, E. B., Campbell, S. D., Kang, L., & Werner, D. H. (2020) · Optics Express · doi:10.1364/oe.398332 · Cited by 67
Metadata
- Authors
- Jafar-Zanjani, S., Inampudi, S., & Mosallaei, H.
- Venue
- Scientific Reports
- Published
- 2018-07-23
- Volume
- 8
- Issue
- 1
- Pages
- 11040-11040
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2884366127
- Cited by
- 269
- References
- 4
- FWCI
- 6.41
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Adaptive Genetic Algorithm for Optical Metasurfaces Design. https://app.cochat.ai/papers/10.1038/s41598-018-29275-z
- The paper
- Jafar-Zanjani, S., Inampudi, S., & Mosallaei, H. (2018). Adaptive Genetic Algorithm for Optical Metasurfaces Design. Scientific Reports. https://doi.org/10.1038/s41598-018-29275-z
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.