The DOI matches its Crossref record.
Thermo-mechanical contact problems and elastic behaviour of single and double sides functionally graded brake disks with temperature-dependent material properties
Open accessAbstract
A thermo-elastic contact problem of functionally graded materials (FGMs) rotating brake disk with different pure brake pad areas under temperature dependent material properties is solved by Finite Element Method (FEM). The properties of brake disk change gradually from metal to ceramic by power-law distribution along the radial direction from the inner to the outer surface. Areas of the pure pad are changing while the vertical force is constant. The ratio of brake pad thickness to FGMs brake disk thickness is assumed 0.66. Two sources of thermal loads are considered: (1) Heat generation between the pad and brake disk due to contact friction, and (2) External thermal load due to a constant temperature at inner and outer surfaces. Mechanical responses of FGMs disk are compared with several pad contact areas. The results for temperature-dependent and temperature-independent material properties are investigated and presented. The results show that the absolute value of the shear stress in temperature-dependent material can be greater than that for temperature-independent material. The radial stress for some specific grading index (n = 1.5) is compressive near the inner surface for double contact while it is tensile for a single contact. It is concluded that the radial strain for some specific value of grading index (n = 1) is lower than other FGMs and pure double side contact brake disks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Thermoresponsive polymers and their biomedical application in tissue engineering – a review
Doberenz, F., Zeng, K., Willems, C., Zhang, K., & Groth, T. (2020) · Journal of Materials Chemistry B · doi:10.1039/c9tb02052g · Cited by 427
Bhantana, P., Rana, M. S., Sun, X.-C., Moussa, M. G., Saleem, M. H., Syaifudin, M., Shah, A., Poudel, A., Pun, A. B., Bhat, M. A., et al. (2021) · Symbiosis · doi:10.1007/s13199-021-00756-6 · Cited by 296
Coleman, K. K., Tay, D. J. W., Tan, K. S., Ong, S. W. X., Than, T. S., Koh, M. H., Chin, Y. Q., Nasir, H., Mak, T. M., Chu, J. J. H., et al. (2022) · Clinical Infectious Diseases · doi:10.1093/cid/ciab691 · Cited by 263
Relative humidity in droplet and airborne transmission of disease
Božič, A., & Kanduč, M. (2021) · Journal of Biological Physics · doi:10.1007/s10867-020-09562-5 · Cited by 142
Catalytic performance of the Ce-doped LaCoO3 perovskite nanoparticles
Ansari, A. A., Adil, S. F., Alam, M., Ahmad, N., Assal, M. E., Labis, J. P., & Alwarthan, A. (2020) · Scientific Reports · doi:10.1038/s41598-020-71869-z · Cited by 128
Metadata
- Authors
- Bayat, M., Alarifi, I. M., Khalili, A. A., El-Bagory, T. M. A. A., Nguyen, H. M., & Asadi, A.
- Venue
- Scientific Reports
- Published
- 2019-10-25
- Volume
- 9
- Issue
- 1
- Pages
- 15317-15317
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2981360881
- Cited by
- 161
- References
- 0
- FWCI
- 17.74
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermo-mechanical contact problems and elastic behaviour of single and double sides functionally graded brake disks with temperature-dependent material properties. https://app.cochat.ai/papers/10.1038/s41598-019-51450-z
- The paper
- Bayat, M., Alarifi, I. M., Khalili, A. A., El-Bagory, T. M. A. A., Nguyen, H. M., & Asadi, A. (2019). Thermo-mechanical contact problems and elastic behaviour of single and double sides functionally graded brake disks with temperature-dependent material properties. Scientific Reports. https://doi.org/10.1038/s41598-019-51450-z
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.