CoChat

Materials and methods for cost-effective fabrication of perovskite photovoltaic devices

Open access
Zhang, Chunyang, Park, Nam-Gyu · 2024 · Communications Materials

The DOI matches its Crossref record; 134 of the 134 references it cites were found in a registry or an index.

Abstract

Although perovskite solar cells (PSCs) are promising next generation photovoltaics, the production of PSCs might be hampered by complex and inefficient procedures. This Review outlines important advances in materials and methods for the cost-effective manufacturing of PSCs, including precursor synthesis, selection criteria for precursors based on chemistry, additive engineering, and deposition techniques. The goal of these technologies is not only to improve the performance and stability of PSCs, but also to significantly reduce their manufacturing costs. These advances are critical to the commercialization of PSCs, in terms of making them viable and cost-effective. The scalable and cost-effective synthesis of perovskite solar cells is dependent on materials chemistry and the synthesis technique. This Review discusses these considerations, including selecting a suitable perovskite pre-cursor, additive engineering, and the deposition process.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s43246-024-00636-8

Cites

134 of 134 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Highly pure precursor materials for PSCs. a Synthesis of δ -FAPbI3 powder at room temperature. b Current density-voltage ( J -V ) curves of devices based on pre-synthesized FAPbI3 powder and the conventional precursor mixture. c (Upper panel) Front and (lower panel) bottom photos of 1-mL vials with different solvents containing 1 mmol of δ -FAPbI3 at room temperature. d (Upper panel) SEM images and (lower panel) XRD pattern of the aqueous synthesized δ -FAPbI3 perovskite
Fig. 1 Highly pure precursor materials for PSCs. a Synthesis of δ -FAPbI3 powder at room temperature. b Current density-voltage ( J -V ) curves of devices based on pre-synthesized FAPbI3 powder and the conventional precursor mixture. c (Upper panel) Front and (lower panel) bottom photos of 1-mL vials with different solvents containing 1 mmol of δ -FAPbI3 at room temperature. d (Upper panel) SEM images and (lower panel) XRD pattern of the aqueous synthesized δ -FAPbI3 perovskiteCC-BY-NC-ND · From the PDF
Fig. 2 Green solvents utilized in the production of PSCs. a The life cycle assessment (LCA) of solvents for PSCs. b The schematic illustration of large-scale perovskite fi lms made via blade coating, requiring solvents: 3500 L per 1 GW of perovskite solar module with PCE of 15%. c The toxicity of solvents assessed by measuring disability-adjusted life years (DALYs). d PbI2@MAFa and PbI2@DMF:DMSOsolutions showing different colloidal structure. e The bene fi ts of
Fig. 2 Green solvents utilized in the production of PSCs. a The life cycle assessment (LCA) of solvents for PSCs. b The schematic illustration of large-scale perovskite fi lms made via blade coating, requiring solvents: 3500 L per 1 GW of perovskite solar module with PCE of 15%. c The toxicity of solvents assessed by measuring disability-adjusted life years (DALYs). d PbI2@MAFa and PbI2@DMF:DMSOsolutions showing different colloidal structure. e The bene fi ts ofCC-BY-NC-ND · From the PDF
Fig. 3 Functional additives in PSCs. a (left panel) schematic model depicting different facets of a perovskite cubic crystal and (right panel) the corresponding SEM image displaying a de fi ned (100) and (111) facets. b AFM images of (left panel) the as-prepared sample and (right panel) the sample exposed to 40% RH for 200 h. c Schematic illustration of the inhomogeneous cation distribution across the fi lm. d The cross-sectional transmission electron microscopy (TEM) of perovskite layer and the high-resolution TEM (HRTEM) images captured from the corresponding boxedareas. The third row represents the calculated intensity variations. e Schematic representation of the utilization of additional anionπ interactions as an AX
Fig. 3 Functional additives in PSCs. a (left panel) schematic model depicting different facets of a perovskite cubic crystal and (right panel) the corresponding SEM image displaying a de fi ned (100) and (111) facets. b AFM images of (left panel) the as-prepared sample and (right panel) the sample exposed to 40% RH for 200 h. c Schematic illustration of the inhomogeneous cation distribution across the fi lm. d The cross-sectional transmission electron microscopy (TEM) of perovskite layer and the high-resolution TEM (HRTEM) images captured from the corresponding boxedareas. The third row represents the calculated intensity variations. e Schematic representation of the utilization of additional anionπ interactions as an AXCC-BY-NC-ND · From the PDF
Fig. 4 Dopants utilized in PSCs. a The δ -toα phase transition via MASCN or FASCNvaportreatment. b Aschematicillustration of strain regulated by FA, MDA, and Cs cations. c Theoretical models for the migration pathway of iodide ions in perovskite lattices depending on different cations doping (Na + , Ca 2 + , Nd 3 + ). d Acomparison of the interaction intensities between different anions (HCOO -, Cl -, Br -, I -, BF4 -) and the iodine vacancy. e Schematic representation of the interaction between perovskite and
Fig. 4 Dopants utilized in PSCs. a The δ -toα phase transition via MASCN or FASCNvaportreatment. b Aschematicillustration of strain regulated by FA, MDA, and Cs cations. c Theoretical models for the migration pathway of iodide ions in perovskite lattices depending on different cations doping (Na + , Ca 2 + , Nd 3 + ). d Acomparison of the interaction intensities between different anions (HCOO -, Cl -, Br -, I -, BF4 -) and the iodine vacancy. e Schematic representation of the interaction between perovskite andCC-BY-NC-ND · From the PDF
Fig. 5 Interface regulation strategies. a Schematic diagram and cross-sectional HRTEMimageofa2Dperovskitepassivation layer. b Schematic representation of the chemical reaction between FA + and 3-APy. Kelvin probe force microscopy (KPFM) imageandheight/potentialpro fi les showing homogeneous surface potential generated by the 3-APy surface treatment. c Schematic representation of the facet-dependent passivation depending on passivation materials. d Donor number (DN) and dialectic constant of the various non-polar, polar and polar aprotic solvents for 2D deposition. DMF dimethylformamide, DMSO dimethyl sulfoxide, CHF chloroform, CBZ chlorobenzene, MeCN acetonitrile, EA ethyl acetate, IPA isopropyl alcohol, NMP N -methyl pyrrolidone, TMS tetramethyl sulfone, PC propylene carbonate, EC ethylene carbonate, NME nitromethane, DMAc dimethylacetamide, GBL γ -butyrolactone,
Fig. 5 Interface regulation strategies. a Schematic diagram and cross-sectional HRTEMimageofa2Dperovskitepassivation layer. b Schematic representation of the chemical reaction between FA + and 3-APy. Kelvin probe force microscopy (KPFM) imageandheight/potentialpro fi les showing homogeneous surface potential generated by the 3-APy surface treatment. c Schematic representation of the facet-dependent passivation depending on passivation materials. d Donor number (DN) and dialectic constant of the various non-polar, polar and polar aprotic solvents for 2D deposition. DMF dimethylformamide, DMSO dimethyl sulfoxide, CHF chloroform, CBZ chlorobenzene, MeCN acetonitrile, EA ethyl acetate, IPA isopropyl alcohol, NMP N -methyl pyrrolidone, TMS tetramethyl sulfone, PC propylene carbonate, EC ethylene carbonate, NME nitromethane, DMAc dimethylacetamide, GBL γ -butyrolactone,CC-BY-NC-ND · From the PDF
Fig. 6 Scaling-up deposition technologies. a Illustration of the R2R technique for the production of fl exible PSCs. b Photographs of the R2R-processed PSCs. c Patterns of perovskite printed on PET substrate. d Theblade-coating process. e The slot-die coating process. f The ultrasonic-assisted spray-coating process.
Fig. 6 Scaling-up deposition technologies. a Illustration of the R2R technique for the production of fl exible PSCs. b Photographs of the R2R-processed PSCs. c Patterns of perovskite printed on PET substrate. d Theblade-coating process. e The slot-die coating process. f The ultrasonic-assisted spray-coating process.CC-BY-NC-ND · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 134 references

Cited by

See all 99

Metadata

Authors
Zhang, C., & Park, N.-G.
Affiliations
Sungkyunkwan University (KR)
Corresponding author
Park, Nam-Gyu
Venue
Communications Materials
Published
2024-09-18
Volume
5
Issue
1
ISSN
2662-4443 (ISSN-L)
OpenAlex
W4402596254
Cited by
72
References
134
Citations by year
2026: 31 · 2025: 39 · 2024: 2
FWCI
7.45
Type
journal article
Language
en
Open access
Licence
Locations
  • Communications Materials (publishedVersion, cc-by-nc-nd)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Funders
National Research Foundation of Korea (NRF-2021R1A3B1076723)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
  • Physical Sciences › Materials Science › Materials Chemistry › Ferroelectric and Piezoelectric Materials
Keywords
perovskite solar cells, cost-effective manufacturing, precursor synthesis, additive engineering, deposition techniques, scalable fabrication, commercialization, device stability

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Materials and methods for cost-effective fabrication of perovskite photovoltaic devices. https://app.cochat.ai/papers/10.1038/s43246-024-00636-8
The paper
Zhang, C., & Park, N.-G. (2024). Materials and methods for cost-effective fabrication of perovskite photovoltaic devices. Communications Materials. https://doi.org/10.1038/s43246-024-00636-8

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.