CoChat

Functionalized Single-Walled Carbon Nanotube-Based Fuel Cell Benchmarked Against US DOE 2017 Technical Targets

Open access

The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.

Abstract

Chemically modified single-walled carbon nanotubes (SWNTs) with varying degrees of functionalization were utilized for the fabrication of SWNT thin film catalyst support layers (CSLs) in polymer electrolyte membrane fuel cells (PEMFCs), which were suitable for benchmarking against the US DOE 2017 targets. Use of the optimum level of SWNT -COOH functionality allowed the construction of a prototype SWNT-based PEMFC with total Pt loading of 0.06 mg(Pt)/cm²--well below the value of 0.125 mg(Pt)/cm² set as the US DOE 2017 technical target for total Pt group metals (PGM) loading. This prototype PEMFC also approaches the technical target for the total Pt content per kW of power (<0.125 g(PGM)/kW) at cell potential 0.65 V: a value of 0.15 g(Pt)/kW was achieved at 80°C/22 psig testing conditions, which was further reduced to 0.12 g(Pt)/kW at 35 psig back pressure.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/srep02257

Cites

52 of 52 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Chemical processing routes for preparation of SWNT materials. The concentration of carboxylic acid groups is varied by the processing method.
Figure 1 Chemical processing routes for preparation of SWNT materials. The concentration of carboxylic acid groups is varied by the processing method.CC BY-NC-ND · PubMed Central
Figure 2 SEM and TEM images of Pt supported SWNTs. (a–d) SEM images and (e–h) TEM images.
Figure 2 SEM and TEM images of Pt supported SWNTs. (a–d) SEM images and (e–h) TEM images.CC BY-NC-ND · PubMed Central
Figure 3 Degree of functionalization, density and surface area of SWNT materials. (a) COOH functional group content, (b) Apparent density and (c) BET surface area of SWNT materials.
Figure 3 Degree of functionalization, density and surface area of SWNT materials. (a) COOH functional group content, (b) Apparent density and (c) BET surface area of SWNT materials.CC BY-NC-ND · PubMed Central
Figure 4 Electrochemical characterizations. (a) Cyclic voltammograms of Pt loaded SWNTs (b) Electrochemical surface area (ECSA) of Pt supported SWNTs.
Figure 4 Electrochemical characterizations. (a) Cyclic voltammograms of Pt loaded SWNTs (b) Electrochemical surface area (ECSA) of Pt supported SWNTs.CC BY-NC-ND · PubMed Central
Figure 5 MEA performance of SWNT catalyst supports. (a) Schematic of MEA with carbon black anode and SWNT cathode catalyst support layer and (b) Fuel cell performance of various SWNT catalyst support layers.
Figure 5 MEA performance of SWNT catalyst supports. (a) Schematic of MEA with carbon black anode and SWNT cathode catalyst support layer and (b) Fuel cell performance of various SWNT catalyst support layers.CC BY-NC-ND · PubMed Central
Figure 6 High mass activity of low Pt-SWNT electrodes. (a) Fuel cell performance of high Pt carbon black (CB) anode (black), compared to low Pt-SWNT anode (red); (b) Mass activity curves for high Pt-CB anode (black), and low Pt-SWNT anode (red).
Figure 6 High mass activity of low Pt-SWNT electrodes. (a) Fuel cell performance of high Pt carbon black (CB) anode (black), compared to low Pt-SWNT anode (red); (b) Mass activity curves for high Pt-CB anode (black), and low Pt-SWNT anode (red).CC BY-NC-ND · PubMed Central
Figure 7 Benchmark of MEA performance against DOE targets. (a) Total Pt loading per cm2 (b) Total Pt content per kW.
Figure 7 Benchmark of MEA performance against DOE targets. (a) Total Pt loading per cm2 (b) Total Pt content per kW.CC BY-NC-ND · PubMed Central
Figure 8 Accelerated stability test. Electrochemical stability testing of SWNT-LF CSL using cyclic voltammetry.
Figure 8 Accelerated stability test. Electrochemical stability testing of SWNT-LF CSL using cyclic voltammetry.CC BY-NC-ND · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 52 references

Research works printed but not linked: 1

  1. Debe, M. Handbook of Fuel Cells - Fundamental, Technology and Applications Vol. 3 (John Wiley and Sons, 2003).

Cited by

See all 97

Metadata

Authors
Jha, N., Ramesh, P., Bekyarova, E., Tian, X., Wang, F., Itkis, M. E., & Haddon, R. C.
Affiliations
  • University of California, Riverside (US)
  • Carbon Solutions (United States) (US)
Corresponding author
Haddon, Robert C.
Venue
Scientific Reports
Published
2013-07-23
Volume
3
Issue
1
Pages
2257-2257
ISSN
2045-2322 (ISSN-L)
OpenAlex
W2054415317
Cited by
97
References
52
Citations by year
2026: 3 · 2025: 8 · 2024: 7 · 2023: 6 · 2022: 8 · 2021: 11 · 2020: 8 · 2019: 5 · 2018: 9 · 2017: 9 · 2016: 6 · 2015: 11 · 2014: 5 · 2013: 1
FWCI
4.59
Type
journal article
Language
en
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by-nc-nd)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by-nc-nd)
  • PubMed Central (publishedVersion, cc-by-nc-nd)
  • PubMed (publishedVersion)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
Funders
U.S. Department of Energy
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Materials Chemistry › Carbon Nanotubes in Composites
Keywords
single-walled carbon nanotubes, carbon nanotube functionalization, proton exchange membrane fuel cells, platinum loading, platinum group metals, fuel cell efficiency
MeSH terms
Bioelectric Energy Sources, Catalysis, Electrochemistry, Electrodes, Materials Testing, Nanotubes, Carbon

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.