The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
A new cathode material for super-valent battery based on aluminium ion intercalation and deintercalation
Open accessAbstract
Due to their small footprint and flexible siting, rechargeable batteries are attractive for energy storage systems. A super-valent battery based on aluminium ion intercalation and deintercalation is proposed in this work with VO2 as cathode and high-purity Al foil as anode. First-principles calculations are also employed to theoretically investigate the crystal structure change and the insertion-extraction mechanism of Al ions in the super-valent battery. Long cycle life, low cost and good capacity are achieved in this battery system. At the current density of 50 mAg(-1), the discharge capacity remains 116 mAhg(-1) after 100 cycles. Comparing to monovalent Li-ion battery, the super-valent battery has the potential to deliver more charges and gain higher specific capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Special points for Brillouin-zone integrations
Monkhorst, H. J., & Pack, J. D. (1976) · Physical Review B · doi:10.1103/physrevb.13.5188 · Cited by 71,721
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
First principles methods using CASTEP
Clark, S. J., Segall, M. D., Pickard, C. J., Hasnip, P. J., Probert, M. I. J., Refson, K., & Payne, M. C. (2005) · Zeitschrift für Kristallographie - Crystalline Materials · doi:10.1524/zkri.220.5.567.65075 · Cited by 14,633
Payne, M. C., Teter, M. P., Allan, D. C., Arias, T. A., & Joannopoulos, J. D. (1992) · Reviews of Modern Physics · doi:10.1103/revmodphys.64.1045 · Cited by 9,728
Plasmonic-metal nanostructures for efficient conversion of solar to chemical energy
Linic, S., Christopher, P., & Ingram, D. B. (2011) · Nature Materials · doi:10.1038/nmat3151 · Cited by 4,852
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Polymer‐Fullerene Bulk‐Heterojunction Solar Cells
Dennler, G., Scharber, M. C., & Brabec, C. J. (2009) · Advanced Materials · doi:10.1002/adma.200801283 · Cited by 3,114
General methods for geometry and wave function optimization
Fischer, T. H., & Almlof, J. (1992) · The Journal of Physical Chemistry · doi:10.1021/j100203a036 · Cited by 2,664
Electrodes with High Power and High Capacity for Rechargeable Lithium Batteries
Kang, K., Meng, Y. S., Bréger, J., Grey, C. P., & Ceder, G. (2006) · Science · doi:10.1126/science.1122152 · Cited by 2,638
Polymer–Fullerene Bulk‐Heterojunction Solar Cells
Brabec, C. J., Gowrisanker, S., Halls, J. J. M., Laird, D., Jia, S., & Williams, S. P. (2010) · Advanced Materials · doi:10.1002/adma.200903697 · Cited by 2,621
Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air
Lee, J., Tai Kim, S., Cao, R., Choi, N., Liu, M., Lee, K. T., & Cho, J. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000010 · Cited by 2,286
Ultrathin and lightweight organic solar cells with high flexibility
Kaltenbrunner, M., White, M. S., Głowacki, E. D., Sekitani, T., Someya, T., Sariciftci, N. S., & Bauer, S. (2012) · Nature Communications · doi:10.1038/ncomms1772 · Cited by 1,757
Functional Materials for Rechargeable Batteries
Cheng, F., Liang, J., Tao, Z., & Chen, J. (2011) · Advanced Materials · doi:10.1002/adma.201003587 · Cited by 1,609
Sodium and sodium-ion energy storage batteries
Ellis, B. L., & Nazar, L. F. (2012) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2012.04.002 · Cited by 1,460
Optimized and transferable nonlocal separable ab initio pseudopotentials
Lin, J. S., Qteish, A., Payne, M. C., & Heine, V. (1993) · Physical Review B · doi:10.1103/physrevb.47.4174 · Cited by 1,183
Advanced zinc-air batteries based on high-performance hybrid electrocatalysts
Li, Y., Gong, M., Liang, Y., Feng, J., Kim, J.-E., Wang, H., Hong, G., Zhang, B., & Dai, H. (2013) · Nature Communications · doi:10.1038/ncomms2812 · Cited by 1,175
Porous Doped Silicon Nanowires for Lithium Ion Battery Anode with Long Cycle Life
Ge, M., Rong, J., Fang, X., & Zhou, C. (2012) · Nano Letters · doi:10.1021/nl300206e · Cited by 856
High temperature sodium batteries: status, challenges and future trends
Hueso, K. B., Armand, M., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24086j · Cited by 774
The rechargeable aluminum-ion battery
Jayaprakash, N., Das, S. K., & Archer, L. A. (2011) · Chemical Communications · doi:10.1039/c1cc15779e · Cited by 743
An overview of wind energy-status 2002
Ackermann, T., & Söder, L. (2002) · Renewable and Sustainable Energy Reviews · doi:10.1016/s1364-0321(02)00008-4 · Cited by 475
Liu, S. H., Hu, J. J., Yan, N., Pan, G. L., Li, G., & Gao, X. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22987k · Cited by 431
Aqueous rechargeable lithium batteries as an energy storage system of superfast charging
Tang, W., Zhu, Y., Hou, Y., Liu, L., Wu, Y., Loh, K. P., Zhang, H., & Zhu, K. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24249h · Cited by 399
Pour, N., Gofer, Y., Major, D. T., & Aurbach, D. (2011) · Journal of the American Chemical Society · doi:10.1021/ja1098512 · Cited by 323
NaxVO2 as possible electrode for Na-ion batteries
Hamani, D., Ati, M., Tarascon, J.-M., & Rozier, P. (2011) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.06.005 · Cited by 247
Fluorinated Natural Graphite Cathode for Rechargeable Ionic Liquid Based Aluminum–Ion Battery
Rani, J. V., Kanakaiah, V., Dadmal, T., Rao, M. S., & Bhavanarushi, S. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.072310jes · Cited by 232
The Roles of V2O5and Stainless Steel in Rechargeable Al–Ion Batteries
Reed, L. D., & Menke, E. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.114306jes · Cited by 228
Energetic Iron(VI) Chemistry: The Super-Iron Battery
Licht, S. L., Wang, B., & Ghosh, S. (1999) · Science · doi:10.1126/science.285.5430.1039 · Cited by 227
N-Doped Graphene–VO2(B) Nanosheet-Built 3D Flower Hybrid for Lithium Ion Battery
Nethravathi, C., Rajamathi, C. R., Rajamathi, M., Gautam, U. K., Wang, X., Golberg, D., & Bando, Y. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400202v · Cited by 179
Wang, W., Yu, C., Lin, Z., Hou, J., Zhu, H., & Jiao, S. (2013) · Nanoscale · doi:10.1039/c2nr32661b · Cited by 171
Self-citationEvaluation of Global Onshore Wind Energy Potential and Generation Costs
Zhou, Y., Luckow, P., Smith, S. J., & Clarke, L. (2012) · Environmental Science & Technology · doi:10.1021/es204706m · Cited by 96
Cited by
Electroceramics for High-Energy Density Capacitors: Current Status and Future Perspectives
Wang, G., Lu, Z., Li, Y., Li, L., Ji, H., Feteira, A., Zhou, D., Wang, D., Zhang, S., & Reaney, I. M. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01264 · Cited by 1,380
Vanadium‐Based Nanomaterials: A Promising Family for Emerging Metal‐Ion Batteries
Xu, X., Xiong, F., Meng, J., Wang, X., Niu, C., An, Q., & Mai, L. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904398 · Cited by 482
An Overview and Future Perspectives of Rechargeable Zinc Batteries
Shi, Y., Chen, Y., Shi, L., Wang, K., Wang, B., Li, L., Ma, Y., Li, Y., Sun, Z., Ali, W., et al. (2020) · Small · doi:10.1002/smll.202000730 · Cited by 389
Aluminum–air battery based on an ionic liquid electrolyte
Gelman, D., Shvartsev, B., & Ein-Eli, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04721d · Cited by 164
Metadata
- Authors
- Wang, W., Jiang, B., Xiong, W., Sun, H., Lin, Z., Hu, L., Tu, J., Hou, J., Zhu, H., & Jiao, S.
- Venue
- Scientific Reports
- Published
- 2013-11-29
- Volume
- 3
- Issue
- 1
- Pages
- 3383-3383
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W1991459152
- Cited by
- 337
- References
- 30
- FWCI
- 10.38
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
