The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Single Junction Inverted Polymer Solar Cell Reaching Power Conversion Efficiency 10.31% by Employing Dual-Doped Zinc Oxide Nano-Film as Cathode Interlayer
Open accessAbstract
We present high efficiency and stable inverted PSCs (i-PSC) by employing sol-gel processed simultaneously doped ZnO by Indium and fullerene derivative (BisNPC60-OH) (denoted as InZnO-BisC60) film as cathode interlayer and PTB7-Th:PC71BM as the active layer (where PTB7-Th is a low bandgap polymer we proposed previously). This dual-doped ZnO, InZnO-BisC60, film shows dual and opposite gradient dopant concentration profiles, being rich in fullerene derivative at the cathode surface in contact with active layer and rich in In at the cathode surface in contact with the ITO surface. Such doping in ZnO not only gives improved surface conductivity by a factor of 270 (from 0.015 to 4.06 S cm(-1)) but also provides enhanced electron mobility by a factor of 132 (from 8.25*10(-5) to 1.09*10(-2) cm(2) V(-1) s(-1)). The resulting i-PSC exhibits the improved PCE 10.31% relative to that with ZnO without doping 8.25%. This PCE 10.31% is the best result among the reported values so far for single junction PSC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Ma, W., Yang, C., Gong, X., Lee, K., & Heeger, A. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200500211 · Cited by 4,565
Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure
He, Z., Zhong, C., Su, S., Xu, M., Wu, H., & Cao, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.190 · Cited by 3,764
Liang, Y., Xu, Z., Xia, J., Tsai, S., Wu, Y., Li, G., Ray, C., & Yu, L. (2010) · Advanced Materials · doi:10.1002/adma.200903528 · Cited by 3,649
Polymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
A polymer tandem solar cell with 10.6% power conversion efficiency
You, J., Dou, L., Yoshimura, K., Kato, T., Ohya, K., Moriarty, T., Emery, K., Chen, C.-C., Gao, J., Li, G., et al. (2013) · Nature Communications · doi:10.1038/ncomms2411 · Cited by 2,778
Li, Y. (2012) · Accounts of Chemical Research · doi:10.1021/ar2002446 · Cited by 2,756
Self-citationSun, Y., Seo, J. H., Takacs, C. J., Seifter, J., & Heeger, A. J. (2011) · Advanced Materials · doi:10.1002/adma.201004301 · Cited by 1,545
Liao, S., Jhuo, H., Cheng, Y., & Chen, S. (2013) · Advanced Materials · doi:10.1002/adma.201301476 · Cited by 1,259
Self-citationHuo, L., Zhang, S., Guo, X., Xu, F., Li, Y., & Hou, J. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201103313 · Cited by 985
Self-citationHau, S. K., Yip, H.-L., Baek, N. S., Zou, J., O’Malley, K., & Jen, A. K.-Y. (2008) · Applied Physics Letters · doi:10.1063/1.2945281 · Cited by 841
Efficient inverted polymer solar cells
Li, G., Chu, C.-W., Shrotriya, V., Huang, J., & Yang, Y. (2006) · Applied Physics Letters · doi:10.1063/1.2212270 · Cited by 788
Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte
Yang, T., Wang, M., Duan, C., Hu, X., Huang, L., Peng, J., Huang, F., & Gong, X. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22296e · Cited by 656
Graphene‐Based Materials for Solar Cell Applications
Yin, Z., Zhu, J., He, Q., Cao, X., Tan, C., Chen, H., Yan, Q., & Zhang, H. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300574 · Cited by 480
Hsieh, C.-H., Cheng, Y.-J., Li, P.-J., Chen, C.-H., Dubosc, M., Liang, R.-M., & Hsu, C.-S. (2010) · Journal of the American Chemical Society · doi:10.1021/ja100236b · Cited by 440
Self-citationZhang, M., Guo, X., Zhang, S., & Hou, J. (2014) · Advanced Materials · doi:10.1002/adma.201304427 · Cited by 425
Analysis of the failure mechanism for a stable organic photovoltaic during 10 000 h of testing
Krebs, F. C., & Norrman, K. (2007) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.794 · Cited by 420
How to model the behaviour of organic photovoltaic cells
Moliton, A., & Nunzi, J. (2006) · Polymer International · doi:10.1002/pi.2038 · Cited by 403
Barium: An Efficient Cathode Layer for Bulk-heterojunction Solar Cells
Gupta, V., Kyaw, A. K. K., Wang, D. H., Chand, S., Bazan, G. C., & Heeger, A. J. (2013) · Scientific Reports · doi:10.1038/srep01965 · Cited by 383
Interfacial modification to improve inverted polymer solar cells
Hau, S. K., Yip, H.-L., Acton, O., Baek, N. S., Ma, H., & Jen, A. K.-Y. (2008) · Journal of Materials Chemistry · doi:10.1039/b808004f · Cited by 361
Liu, S., Zhang, K., Lu, J., Zhang, J., Yip, H.-L., Huang, F., & Cao, Y. (2013) · Journal of the American Chemical Society · doi:10.1021/ja408363c · Cited by 349
Contents: (Adv. Mater. 8/2010)
(2010) · Advanced Materials · doi:10.1002/adma.201090021 · Cited by 336
Cheng, Y.-J., Hsieh, C.-H., He, Y., Hsu, C.-S., & Li, Y. (2010) · Journal of the American Chemical Society · doi:10.1021/ja108259n · Cited by 308
Self-citationPhotoemission, autoionization, and x-ray-absorption spectroscopy of ultrathin-filmC60on Au(110)
Maxwell, A. J., Brühwiler, P. A., Nilsson, A., Mårtensson, N., & Rudolf, P. (1994) · Physical Review B · doi:10.1103/physrevb.49.10717 · Cited by 195
Liu, J., Shao, S., Fang, G., Meng, B., Xie, Z., & Wang, L. (2012) · Advanced Materials · doi:10.1002/adma.201200238 · Cited by 161
Top‐Down Approach for Nanophase Reconstruction in Bulk Heterojunction Solar Cells
Kong, J., Hwang, I., & Lee, K. (2014) · Advanced Materials · doi:10.1002/adma.201402182 · Cited by 126
Game, O. S., Singh, U. N., Gupta, A. A., Suryawanshi, A., Banpurkar, A. G., & Ogale, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32812g · Cited by 69
Cited by
Efficient organic solar cells processed from hydrocarbon solvents
Zhao, J., Li, Y., Yang, G., Jiang, K., Lin, H., Ade, H., Ma, W., & Yan, H. (2016) · Nature Energy · doi:10.1038/nenergy.2015.27 · Cited by 2,367
Self-citationBio-Integrated Wearable Systems: A Comprehensive Review
Ray, T. R., Choi, J., Bandodkar, A. J., Krishnan, S., Gutruf, P., Tian, L., Ghaffari, R., & Rogers, J. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00573 · Cited by 1,350
Yang, Y., Zhang, Z.-G., Bin, H., Chen, S., Gao, L., Xue, L., Yang, C., & Li, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b09110 · Cited by 876
Self-citationEfficient inverted polymer solar cells employing favourable molecular orientation
Vohra, V., Kawashima, K., Kakara, T., Koganezawa, T., Osaka, I., Takimiya, K., & Murata, H. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.84 · Cited by 829
Bin, H., Zhang, Z.-G., Gao, L., Chen, S., Zhong, L., Xue, L., Yang, C., & Li, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b01744 · Cited by 783
Self-citation
Metadata
- Authors
- Liao, S.-H., Jhuo, H.-J., Yeh, P.-N., Cheng, Y.-S., Li, Y.-L., Lee, Y.-H., Sharma, S., & Chen, S.-A.
- Venue
- Scientific Reports
- Published
- 2014-10-29
- Volume
- 4
- Issue
- 1
- Pages
- 6813-6813
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2051432897
- Cited by
- 497
- References
- 27
- FWCI
- 60.49
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.