Controllable Thermal Rectification Realized in Binary Phase Change Composites
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Phase transition is a natural phenomenon happened around our daily life, represented by the process from ice to water. While melting and solidifying at a certain temperature, a high heat of fusion is accompanied, classified as the latent heat. Phase change material (PCM) has been widely applied to store and release large amount of energy attributed to the distinctive thermal behavior. Here, with the help of nanoporous materials, we introduce a general strategy to achieve the binary eicosane/PEG4000 stuffed reduced graphene oxide aerogels, which has two ends with different melting points. It's successfully demonstrated this binary PCM composites exhibits thermal rectification characteristic. Partial phase transitions within porous networks instantaneously result in one end of the thermal conductivity saltation at a critical temperature and therefore switch on or off the thermal rectification with the coefficient up to 1.23. This value can be further raised by adjusting the loading content of PCM. The uniqueness of this device lies in its performance as a normal thermal conductor at low temperature, only exhibiting rectification phenomenon when temperature is higher than a critical value. The stated technology has broad applications for thermal energy control in macroscopic scale such as energy-efficiency building or nanodevice thermal management.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanoscale thermal transport. II. 2003–2012
Cahill, D. G., Braun, P. V., Chen, G., Clarke, D. R., Fan, S., Goodson, K. E., Keblinski, P., King, W. P., Mahan, G. D., Majumdar, A., et al. (2014) · Applied Physics Reviews · doi:10.1063/1.4832615 · Cited by 1,763
Coherent Phonon Heat Conduction in Superlattices
Luckyanova, M. N., Garg, J., Esfarjani, K., Jandl, A., Bulsara, M. T., Schmidt, A. J., Minnich, A. J., Chen, S., Dresselhaus, M. S., Ren, Z., et al. (2012) · Science · doi:10.1126/science.1225549 · Cited by 630
Liu, Z., Zou, R., Lin, Z., Gui, X., Chen, R., Lin, J., Shang, Y., & Cao, A. (2013) · Nano Letters · doi:10.1021/nl401097d · Cited by 165
Self-citation
Cited by
Nanoconfined phase change materials for thermal energy applications
Aftab, W., Huang, X., Wu, W., Liang, Z., Mahmood, A., & Zou, R. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03587j · Cited by 647
Self-citationZhang, P., Xiao, X., & Ma, Z. W. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.043 · Cited by 555
Phase change material-integrated latent heat storage systems for sustainable energy solutions
Aftab, W., Usman, A., Shi, J., Yuan, K., Qin, M., & Zou, R. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00527h · Cited by 536
Self-citationYuan, K., Shi, J., Aftab, W., Qin, M., Usman, A., Zhou, F., Lv, Y., Gao, S., & Zou, R. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904228 · Cited by 459
Self-citationGao, H., Wang, J., Chen, X., Wang, G., Huang, X., Li, A., & Dong, W. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.007 · Cited by 391
Size-dependent phononic thermal transport in low-dimensional nanomaterials
Zhang, Z., Ouyang, Y., Cheng, Y., Chen, J., Li, N., & Zhang, G. (2020) · Physics Reports · doi:10.1016/j.physrep.2020.03.001 · Cited by 341
Self-citationThermal Conductivity of Amorphous Materials
Zhou, W., Cheng, Y., Chen, K., Xie, G., Wang, T., & Zhang, G. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201903829 · Cited by 323
Self-citationYang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z.-Y., Xie, B.-H., Yang, M.-B., & Yang, W. (2019) · Materials Horizons · doi:10.1039/c8mh01219a · Cited by 269
Self-citation
Metadata
- Authors
- Chen, R., Cui, Y., Tian, H., Yao, R., Liu, Z., Shu, Y., Li, C., Yang, Y., Ren, T., Zhang, G., & Zou, R.
- Venue
- Scientific Reports
- Published
- 2015-03-09
- Volume
- 5
- Issue
- 1
- Pages
- 8884-8884
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2003554572
- Cited by
- 70
- References
- 3
- FWCI
- 3.60
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.