The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
High-Performance Planar-Type Photodetector on (100) Facet of MAPbI3 Single Crystal
Open accessAbstract
Recently, the discovery of organometallic halide perovskites provides promising routes for fabricating optoelectronic devices with low cost and high performance. Previous experimental studies of MAPbI 3 optoelectronic devices, such as photodetectors and solar cells, are normally based on polycrystalline films. In this work, a high-performance planar-type photodetector fabricated on the (100) facet of a MAPbI 3 single crystal is proposed. We demonstrate that MAPbI 3 photodetector based on single crystal can perform much better than that on polycrystalline-film counterpart. The low trap density of MAPbI 3 single crystal accounts for the higher carrier mobility and longer carrier diffusion length, resulted in a significant performance increasement of MAPbI 3 photodetector. Compared with similar planar-type photodetectors based on MAPbI 3 polycrystalline film, our MAPbI 3 single crystal photodetector showed excellent performance with good stability and durability, broader response spectrum to near-infrared region, about 10 2 times higher responsivity and EQE and approximately 10 3 times faster response speed. These results may pave the way for exploiting high-performance perovskites photodetectors based on single crystal.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Cited by
Printable organometallic perovskite enables large-area, low-dose X-ray imaging
Kim, Y. C., Kim, K. H., Son, D.-Y., Jeong, D.-N., Seo, J.-Y., Choi, Y. S., Han, I. T., Lee, S. Y., & Park, N.-G. (2017) · Nature · doi:10.1038/nature24032 · Cited by 1,206
Zhumekenov, A. A., Saidaminov, M. I., Haque, M. A., Alarousu, E., Sarmah, S. P., Murali, B., Dursun, I., Miao, X.-H., Abdelhady, A. L., Wu, T., et al. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00002 · Cited by 952
Evidence for ion migration in hybrid perovskite solar cells with minimal hysteresis
Calado, P., Telford, A. M., Bryant, D., Li, X., Nelson, J., O’Regan, B. C., & Barnes, P. R. F. (2016) · Nature Communications · doi:10.1038/ncomms13831 · Cited by 845
Ahmadi, M., Wu, T., & Hu, B. (2017) · Advanced Materials · doi:10.1002/adma.201605242 · Cited by 820
Low‐Dimensional Metal Halide Perovskite Photodetectors
Wang, H., Li, S., Liu, X., Shi, Z., Fang, X., & He, J. (2021) · Advanced Materials · doi:10.1002/adma.202003309 · Cited by 574
Metadata
- Authors
- Lian, Z., Yan, Q., Lv, Q., Wang, Y., Liu, L., Zhang, L., Pan, S., Li, Q., Wang, L., & Sun, J.-L.
- Venue
- Scientific Reports
- Published
- 2015-11-13
- Volume
- 5
- Issue
- 1
- Pages
- 16563-16563
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2424301850
- Cited by
- 336
- References
- 3
- FWCI
- 15.56
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
