CoChat

Variation of outdoor illumination as a function of solar elevation and light pollution

Open access

The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.

Abstract

The illumination of the environment undergoes both intensity and spectral changes during the 24 h cycle of a day. Daylight spectral power distributions are well described by low-dimensional models such as the CIE (Commission Internationale de l’Éclairage) daylight model, but the performance of this model in non-daylight regimes is not characterised. We measured downwelling spectral irradiance across multiple days in two locations in North America: One rural location (Cherry Springs State Park, PA) with minimal anthropogenic light sources, and one city location (Philadelphia, PA). We characterise the spectral, intensity and colour changes and extend the existing CIE model for daylight to capture twilight components and the spectrum of the night sky.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/srep26756

Cites

25 of 25 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Relative and absolute downwelling illumination at night, twilight and day. (a) Measurements in the Rural location. Red dot in night time spectrum panel indicates 558 nm. (b) Measurements in the City location. Red dot in night time spectrum panel indicates 819 nm; red line indicates 570–615 nm. Spectral irradiance measurements were binned by 1° steps of solar elevation and averaged (except for night, where all measurements for θs < 18° were averaged). The colour bars above the individual plots indicate the solar elevation bins. All measurements were normalised to a value of 1 at 555 nm to emphasise changes in spectral composition (gray dots). Insets show absolute spectral irradiance distribution on a log scale.
Figure 1 Relative and absolute downwelling illumination at night, twilight and day. (a) Measurements in the Rural location. Red dot in night time spectrum panel indicates 558 nm. (b) Measurements in the City location. Red dot in night time spectrum panel indicates 819 nm; red line indicates 570–615 nm. Spectral irradiance measurements were binned by 1° steps of solar elevation and averaged (except for night, where all measurements for θs < 18° were averaged). The colour bars above the individual plots indicate the solar elevation bins. All measurements were normalised to a value of 1 at 555 nm to emphasise changes in spectral composition (gray dots). Insets show absolute spectral irradiance distribution on a log scale.CC BY · PubMed Central
Figure 2 Intensity changes in downwelling illumination as a function of solar elevation. (a) Dependence of total visible irradiance (400–800 nm) on solar elevation at the Rural location. Vertical lines indicate transition zones between night, astronomical twilight, nautical twilight, civil twilight, and daylight. (b) Same as in panel (a) but split into morning/dawn and evening/dusk sequences. (c) Dependence of total UV-A irradiance (315-400 nm) and UV-B irradiance (280-315 nm) on solar elevation at the Rural location. Because of wavelength range differences in the two spectrometers used during the different twilight/daylight regimes, there are no UV-A data for the daylight regime. (d) Dependence of total visible irradiance (400–800 nm) on solar elevation at the City location. Horizontal lines indicate maxima and minimum mean total irradiance values for the rural location (panel a). (e) Same as in panel (d) but split into morning/dawn and evening/dusk sequences. (f) Dependence of total UV-A irradiance (315-400 nm) and UV-B irradiance (280-315 nm) on solar elevation at the Rural location. Data were averaged in 2° bins.
Figure 2 Intensity changes in downwelling illumination as a function of solar elevation. (a) Dependence of total visible irradiance (400–800 nm) on solar elevation at the Rural location. Vertical lines indicate transition zones between night, astronomical twilight, nautical twilight, civil twilight, and daylight. (b) Same as in panel (a) but split into morning/dawn and evening/dusk sequences. (c) Dependence of total UV-A irradiance (315-400 nm) and UV-B irradiance (280-315 nm) on solar elevation at the Rural location. Because of wavelength range differences in the two spectrometers used during the different twilight/daylight regimes, there are no UV-A data for the daylight regime. (d) Dependence of total visible irradiance (400–800 nm) on solar elevation at the City location. Horizontal lines indicate maxima and minimum mean total irradiance values for the rural location (panel a). (e) Same as in panel (d) but split into morning/dawn and evening/dusk sequences. (f) Dependence of total UV-A irradiance (315-400 nm) and UV-B irradiance (280-315 nm) on solar elevation at the Rural location. Data were averaged in 2° bins.CC BY · PubMed Central
Figure 3 Chromaticity changes in the downwelling illumination as a function of solar elevation. (a) Illumination CIE 1931 y chromaticity as a function of solar elevation. Vertical lines indicate transition zones between night, astronomical twilight, nautical twilight, civil twilight, and day. The y axis is shared with panel b. Data were averaged in 2° bins. (b) Scatter plot of individual chromaticity data for each measured spectrum. The black line indicates the chromaticity along the daylight locus produced by calculating the chromaticity of CIE daylight spectral power distributions with correlated colour temperatures between 4000 K and 25,000 K. Grey cross-hair line indicates the chromaticity of CIE standard illuminant D65 (6500 K). Histograms at the top show the distributions of CIE x chromaticity for the daylight, twilight and night regimes, with the x axis shared with panel b. Histograms to the right show the distributions of CIE y chromaticity for the daylight, twilight and night regimes, with the y axis shared with panel b. Squares indicate the mean x and y chromaticities, respectively, within the respective regime. (c) Illumination CIE 1931 x chromaticity as a function of solar elevation. Horizontal lines indicate transition zones between night, astronomical twilight, nautical twilight, civil twilight, and daylight. The x axis shared with panel b. Data were averaged in 2° bins.
Figure 3 Chromaticity changes in the downwelling illumination as a function of solar elevation. (a) Illumination CIE 1931 y chromaticity as a function of solar elevation. Vertical lines indicate transition zones between night, astronomical twilight, nautical twilight, civil twilight, and day. The y axis is shared with panel b. Data were averaged in 2° bins. (b) Scatter plot of individual chromaticity data for each measured spectrum. The black line indicates the chromaticity along the daylight locus produced by calculating the chromaticity of CIE daylight spectral power distributions with correlated colour temperatures between 4000 K and 25,000 K. Grey cross-hair line indicates the chromaticity of CIE standard illuminant D65 (6500 K). Histograms at the top show the distributions of CIE x chromaticity for the daylight, twilight and night regimes, with the x axis shared with panel b. Histograms to the right show the distributions of CIE y chromaticity for the daylight, twilight and night regimes, with the y axis shared with panel b. Squares indicate the mean x and y chromaticities, respectively, within the respective regime. (c) Illumination CIE 1931 x chromaticity as a function of solar elevation. Horizontal lines indicate transition zones between night, astronomical twilight, nautical twilight, civil twilight, and daylight. The x axis shared with panel b. Data were averaged in 2° bins.CC BY · PubMed Central
Figure 4 Colour rendering. sRGB pseudo-colour rendering of illuminant spectra. Spectral data were averaged in 2° bins, then normalised by their L2-norm. The log (base 10) of the normalizing values were scaled to be within 0.3 and 1, and the L2-normalised spectra multiplied by the resulting value. CIE 1931 XYZ tristimulus values were computed from the scaled spectra and transformed to sRGB32 values for display.
Figure 4 Colour rendering. sRGB pseudo-colour rendering of illuminant spectra. Spectral data were averaged in 2° bins, then normalised by their L2-norm. The log (base 10) of the normalizing values were scaled to be within 0.3 and 1, and the L2-normalised spectra multiplied by the resulting value. CIE 1931 XYZ tristimulus values were computed from the scaled spectra and transformed to sRGB32 values for display.CC BY · PubMed Central
Figure 5 Fits of CIE daylight model to the spectral irradiance measurements. (a) CIE daylight basis functions S0 (mean), S1 and S2 between 360 nm and 830 nm. Basis functions were normalised by their vector norm. (b) Goodness-of-fit of CIE daylight model as a function of solar elevation in the Rural location. The points labelled “Granada database” and “D&W (2000) data” correspond to the mean fit ± 1SD of the daylight model to the daylight spectra from the Granada and DiCarlo & Wandell3 datasets. (c) Component loadings on S0, S1 and S2 as a function of solar elevation in the Rural location (mean ± 1SD). (d) Goodness-of-fit of CIE daylight model as a function of solar elevation in the City location. The points labelled “Granada database” and “D&W (2000) data” correspond to the mean fit ± 1SD of the daylight model to the daylight spectra from the Granada and DiCarlo & Wandell3 datasets. (e) Component loadings on S0, S1 and S2 as a function of solar elevation in the City location. In panels (b–e) vertical lines indicate transition zones between night, astronomical twilight, nautical twilight, civil twilight, and day. Goodness-of-fit values and component loadings were averaged in 2° bins of solar elevation. The CIE model was fit in the 360–830 nm range to the spectra in this dataset, and in the 380–780 nm range for Granada and DiCarlo & Wandell3 datasets. R2 were calculated in these ranges, respectively.
Figure 5 Fits of CIE daylight model to the spectral irradiance measurements. (a) CIE daylight basis functions S0 (mean), S1 and S2 between 360 nm and 830 nm. Basis functions were normalised by their vector norm. (b) Goodness-of-fit of CIE daylight model as a function of solar elevation in the Rural location. The points labelled “Granada database” and “D&W (2000) data” correspond to the mean fit ± 1SD of the daylight model to the daylight spectra from the Granada and DiCarlo & Wandell3 datasets. (c) Component loadings on S0, S1 and S2 as a function of solar elevation in the Rural location (mean ± 1SD). (d) Goodness-of-fit of CIE daylight model as a function of solar elevation in the City location. The points labelled “Granada database” and “D&W (2000) data” correspond to the mean fit ± 1SD of the daylight model to the daylight spectra from the Granada and DiCarlo & Wandell3 datasets. (e) Component loadings on S0, S1 and S2 as a function of solar elevation in the City location. In panels (b–e) vertical lines indicate transition zones between night, astronomical twilight, nautical twilight, civil twilight, and day. Goodness-of-fit values and component loadings were averaged in 2° bins of solar elevation. The CIE model was fit in the 360–830 nm range to the spectra in this dataset, and in the 380–780 nm range for Granada and DiCarlo & Wandell3 datasets. R2 were calculated in these ranges, respectively.CC BY · PubMed Central
Figure 6 Extending the CIE daylight model to twilight and night illumination. (a) Mean residuals of CIE fit for daylight and civil twilight in both Rural and City location. Residuals were normalised by their vector length. (b) Mean residuals after fitting the CIE Model along with the daylight and civil twilight residuals (CIE + 2 model) to the astronomical twilight data from the rural location (upper panel) and the City location (lower panel). Residuals were normalised by their vector length. Inset in the upper panel shows the normalised night spectrum measured in Zabriskie Point, CA by Cronin, et al.1. Inset in the lower panel shows the normalised night spectrum measured in Boston, MA by Cronin, et al.1. Note the correspondence of relative spectral peaks between the residuals and the night spectra measured by Cronin, et al.1. In the upper panel, black dot indicates 558 nm. In the lower panel, black dot indicates 819 nm; black line indicates 570–615 nm. (c) Goodness-of-fit of the full CIE + 3R model in the Rural location (upper panel) and the CIE + 3C model the City location (lower panel). Vertical lines indicate transition zones between night, astronomical twilight, nautical twilight, civil twilight, and day. Goodness-of-fit values were averaged in 5° bins of solar elevation. Insets in upper and lower panels show goodness-of-fit for the CIE model (same as Fig. 5b,d), and CIE + 1, CIE + 2 and final CIE + 3R and CIE + 3C models. (d) Component loadings of the additional three basis functions for the Rural and the City location. Vert ical lines indicate transition zones between night, astronomical twilight, nautical twilight, civil twilight, and day. Component loadings and goodness-of-fit values were averaged in 2° bins of solar elevation. The CIE, CIE + 1, CIE + 2 and final CIE + 3R and CIE + 3C models were fit in the 360–830 nm range to the spectra in this dataset, and in the 380–780 nm range for Granada and DiCarlo & Wandell3 datasets. R2 were calculated in these ranges, respectively.
Figure 6 Extending the CIE daylight model to twilight and night illumination. (a) Mean residuals of CIE fit for daylight and civil twilight in both Rural and City location. Residuals were normalised by their vector length. (b) Mean residuals after fitting the CIE Model along with the daylight and civil twilight residuals (CIE + 2 model) to the astronomical twilight data from the rural location (upper panel) and the City location (lower panel). Residuals were normalised by their vector length. Inset in the upper panel shows the normalised night spectrum measured in Zabriskie Point, CA by Cronin, et al.1. Inset in the lower panel shows the normalised night spectrum measured in Boston, MA by Cronin, et al.1. Note the correspondence of relative spectral peaks between the residuals and the night spectra measured by Cronin, et al.1. In the upper panel, black dot indicates 558 nm. In the lower panel, black dot indicates 819 nm; black line indicates 570–615 nm. (c) Goodness-of-fit of the full CIE + 3R model in the Rural location (upper panel) and the CIE + 3C model the City location (lower panel). Vertical lines indicate transition zones between night, astronomical twilight, nautical twilight, civil twilight, and day. Goodness-of-fit values were averaged in 5° bins of solar elevation. Insets in upper and lower panels show goodness-of-fit for the CIE model (same as Fig. 5b,d), and CIE + 1, CIE + 2 and final CIE + 3R and CIE + 3C models. (d) Component loadings of the additional three basis functions for the Rural and the City location. Vert ical lines indicate transition zones between night, astronomical twilight, nautical twilight, civil twilight, and day. Component loadings and goodness-of-fit values were averaged in 2° bins of solar elevation. The CIE, CIE + 1, CIE + 2 and final CIE + 3R and CIE + 3C models were fit in the 360–830 nm range to the spectra in this dataset, and in the 380–780 nm range for Granada and DiCarlo & Wandell3 datasets. R2 were calculated in these ranges, respectively.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 25 references

Research works printed but not linked: 3

  1. Lynch D. K. & Livingston W. C. Color and light in nature. 2nd edn, (Cambridge University Press, 2001).
  2. Horton T. H. In Circadian clocks Vol. 12 (eds Takahashi J. S., Turek F. W. & Moore R. Y.) Ch. 2, 45– 57 (Kluwer, 2001).
  3. Zalewski E. F. In Handbook of Optics Vol. 2 (ed Bass M.) 24.23– 24.51 (McGraw-Hill, 1995).

Cited by

Items 101–200 of 208

Metadata

Authors
Spitschan, M., Aguirre, G. K., Brainard, D. H., & Sweeney, A. M.
Affiliations
University of Pennsylvania (US)
Corresponding author
  • Brainard, David H.
  • Sweeney, Alison M.
Venue
Scientific Reports
Published
2016-06-07
Volume
6
Issue
1
Pages
26756-26756
ISSN
2045-2322 (ISSN-L)
OpenAlex
W2410712308
Cited by
208
References
25
Citations by year
2026: 19 · 2025: 15 · 2024: 21 · 2023: 29 · 2022: 21 · 2021: 36 · 2020: 24 · 2019: 24 · 2018: 13 · 2017: 6
FWCI
10.63
Type
journal article
Language
en
Update notices
erratum (2017-12-22)
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
Funders
  • Alfred P. Sloan Foundation
  • Pennsylvania Department of Conservation and Natural Resources
  • University of Pennsylvania (P30 EY001583)
  • National Institutes of Health (NIH-R01, R01 EY10016, EY001583)
  • National Eye Institute (R01EY024681, P30EY001583, R01EY010016)
Topics
  • Physical Sciences › Environmental Science › Global and Planetary Change › Impact of Light on Environment and Health
  • Physical Sciences › Physics and Astronomy › Instrumentation › Astronomy and Astrophysical Research
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Color Science and Applications
Keywords
outdoor lighting, light pollution, solar altitude, twilight, night sky spectrum, color change, Philadelphia
MeSH terms
Radiation Exposure, Calibration, Cities, Color, Lighting, Models, Theoretical, Pennsylvania, Rural Population, Spectrophotometry, Sunlight, Time Factors, Solar System, Photoperiod, Solar Activity

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.