The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate
Open accessAbstract
Photocurable, biocompatible liquid resins are highly desired for 3D stereolithography based bioprinting. Here we solidified a novel renewable soybean oil epoxidized acrylate, using a 3D laser printing technique, into smart and highly biocompatible scaffolds capable of supporting growth of multipotent human bone marrow mesenchymal stem cells (hMSCs). Porous scaffolds were readily fabricated by simply adjusting the printer infill density; superficial structures of the polymerized soybean oil epoxidized acrylate were significantly affected by laser frequency and printing speed. Shape memory tests confirmed that the scaffold fixed a temporary shape at −18 °C and fully recovered its original shape at human body temperature (37 °C), which indicated the great potential for 4D printing applications. Cytotoxicity analysis proved that the printed scaffolds had significant higher hMSC adhesion and proliferation than traditional polyethylene glycol diacrylate (PEGDA) and had no statistical difference from poly lactic acid (PLA) and polycaprolactone (PCL). This research is believed to significantly advance the development of biomedical scaffolds with renewable plant oils and advanced 3D fabrication techniques.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Application of chitosan-based polysaccharide biomaterials in cartilage tissue engineering: a review
Francis Suh, J.-K., & Matthew, H. W. T. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00126-5 · Cited by 1,997
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Oils and Fats as Renewable Raw Materials in Chemistry
Biermann, U., Bornscheuer, U., Meier, M. A. R., Metzger, J. O., & Schäfer, H. J. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201002767 · Cited by 1,003
Sawhney, A. S., Pathak, C. P., & Hubbell, J. A. (1993) · Macromolecules · doi:10.1021/ma00056a005 · Cited by 974
Recent advances in polymer shape memory
Xie, T. (2011) · Polymer · doi:10.1016/j.polymer.2011.08.003 · Cited by 870
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Ge, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 726
Vegetable-oil-based polymers as future polymeric biomaterials
Miao, S., Wang, P., Su, Z., & Zhang, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.08.040 · Cited by 573
Self-citationUse of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth
Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571
Self-citationRenewable polymeric materials from vegetable oils: a perspective
Lligadas, G., Ronda, J. C., Galià, M., & Cádiz, V. (2013) · Materials Today · doi:10.1016/j.mattod.2013.08.016 · Cited by 559
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
Morrison, R. J., Hollister, S. J., Niedner, M. F., Mahani, M. G., Park, A. H., Mehta, D. K., Ohye, R. G., & Green, G. E. (2015) · Science Translational Medicine · doi:10.1126/scitranslmed.3010825 · Cited by 498
A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
Chemically Cross-Linked Polycyclooctene: Synthesis, Characterization, and Shape Memory Behavior
Liu, C., Chun, S. B., Mather, P. T., Zheng, L., Haley, E. H., & Coughlin, E. B. (2002) · Macromolecules · doi:10.1021/ma021141j · Cited by 282
Castro, N. J., O'Brien, J., & Zhang, L. G. (2015) · Nanoscale · doi:10.1039/c5nr03425f · Cited by 209
Self-citationBiomaterials derived from silk–tropoelastin protein systems
Hu, X., Wang, X., Rnjak‐Kovacina, J., Weiss, A. S., & Kaplan, D. L. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.07.044 · Cited by 157
Synthetic hydrogels for controlled stem cell differentiation
Liu, S., Tay, P. K. R., Khan, M., Ee, P. L. R., Hedrick, J. L., & Yang, Y. Y. (2009) · Soft Matter · doi:10.1039/b916705f · Cited by 146
Jansen, J., Melchels, F. P. W., Grijpma, D. W., & Feijén, J. (2008) · Biomacromolecules · doi:10.1021/bm801001r · Cited by 136
Garrison, T. F., Kessler, M. R., & Larock, R. C. (2014) · Polymer · doi:10.1016/j.polymer.2014.01.014 · Cited by 130
Soybean oil‐based polyurethane networks as candidate biomaterials: Synthesis and biocompatibility
Miao, S., Sun, L., Wang, P., Liu, R., Su, Z., & Zhang, S. (2012) · European Journal of Lipid Science and Technology · doi:10.1002/ejlt.201200050 · Cited by 103
Self-citationLee, S., Kang, H., Park, J. K., Rhie, J., Hahn, S. K., & Cho, D. (2007) · Biomedical Microdevices · doi:10.1007/s10544-007-9129-4 · Cited by 103
Synthesis of bioabsorbable networks from methacrylate-endcapped polyesters
Storey, R. F., Warren, S. C., Allison, C. J., Wiggins, J. S., & Puckett, A. D. (1993) · Polymer · doi:10.1016/0032-3861(93)90203-m · Cited by 84
Grijpma, D. W., Hou, Q., & Feijén, J. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.08.002 · Cited by 82
Phosphoester cross-linked vegetable oil to construct a biodegradable and biocompatible elastomer
Liu, Z., Xu, Y., Cao, L., Bao, C., Sun, H., Wang, L., Dai, K., & Zhu, L. (2012) · Soft Matter · doi:10.1039/c2sm25115a · Cited by 42
Soybean Oil‐Based Polyurethane Networks: Shape‐Memory Effects and Surface Morphologies
Miao, S., Callow, N. V., Wang, P., Liu, Y., Su, Z., & Zhang, S. (2013) · Journal of the American Oil Chemists Society · doi:10.1007/s11746-013-2273-5 · Cited by 39
Self-citationSoybean oil‐based shape‐memory polyurethanes: Synthesis and characterization
Miao, S., Wang, P., Su, Z., Liu, Y., & Zhang, S. (2012) · European Journal of Lipid Science and Technology · doi:10.1002/ejlt.201200219 · Cited by 32
Self-citationGholami, H., Yeganeh, H., Gharibi, R., Jalilian, S. M., & Sorayya, M. (2015) · Polymer · doi:10.1016/j.polymer.2015.02.029 · Cited by 25
Vegetable oil thermosets reinforced by tannin–lipid formulations
Luo, C., Grigsby, W. J., Edmonds, N. R., & Al‐Hakkak, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.08.048 · Cited by 24
Cited by
Advances in engineering hydrogels
Zhang, Y. S., & Khademhosseini, A. (2017) · Science · doi:10.1126/science.aaf3627 · Cited by 2,908
A Review of Shape Memory Polymers and Composites: Mechanisms, Materials, and Applications
Xia, Y., He, Y., Zhang, F., Liu, Y., & Leng, J. (2021) · Advanced Materials · doi:10.1002/adma.202000713 · Cited by 1,281
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Three-dimensional (3D) printed scaffold and material selection for bone repair
Zhang, L., Yang, G., Johnson, B. N., & Jia, X. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.039 · Cited by 865
Self-citation3D Printing of Polymer Nanocomposites via Stereolithography
Manapat, J. Z., Chen, Q., Ye, P., & Advincula, R. C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600553 · Cited by 565
Metadata
- Authors
- Miao, S., Zhu, W., Castro, N. J., Nowicki, M., Zhou, X., Cui, H., Fisher, J. P., & Zhang, L. G.
- Venue
- Scientific Reports
- Published
- 2016-06-02
- Volume
- 6
- Issue
- 1
- Pages
- 27226-27226
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2410195985
- Cited by
- 477
- References
- 30
- FWCI
- 14.13
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.