The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Superior hydrogen storage in high entropy alloys
Open accessAbstract
Metal hydrides (MH x) provide a promising solution for the requirement to store large amounts of hydrogen in a future hydrogen-based energy system. This requires the design of alloys which allow for a very high H/M ratio. Transition metal hydrides typically have a maximum H/M ratio of 2 and higher ratios can only be obtained in alloys based on rare-earth elements. In this study we demonstrate, for the first time to the best of our knowledge, that a high entropy alloy of TiVZrNbHf can absorb much higher amounts of hydrogen than its constituents and reach an H/M ratio of 2.5. We propose that the large hydrogen-storage capacity is due to the lattice strain in the alloy that makes it favourable to absorb hydrogen in both tetrahedral and octahedral interstitial sites. This observation suggests that high entropy alloys have future potential for use as hydrogen storage materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal hydride materials for solid hydrogen storage: A review
SAKINTUNA, B., LAMARIDARKRIM, F., & HIRSCHER, M. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2006.11.022 · Cited by 3,715
The metal-hydrogen system: basic bulk properties
Fukai, Y. (2005) · Springer Series in Materials Science · doi:10.1007/3-540-28883-x · Cited by 1,197
Cited by
High-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
High-entropy energy materials: challenges and new opportunities
Ma, Y., Ma, Y., Wang, Q., Schweidler, S., Botros, M., Fu, T., Hahn, H., Brezesinski, T., & Breitung, B. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00505g · Cited by 963
Materials for hydrogen-based energy storage – past, recent progress and future outlook
Hirscher, M., Yartys, V. A., Baricco, M., Bellosta von Colbe, J., Blanchard, D., Bowman, R. C., Broom, D. P., Buckley, C. E., Chang, F., Chen, P., et al. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.153548 · Cited by 949
Self-citation(2021) · doi:10.1016/j.rser.2021.111311 · Cited by 850
Recent progress of high-entropy materials for energy storage and conversion
Amiri, A., & Shahbazian-Yassar, R. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta09578h · Cited by 592
Metadata
- Authors
- Sahlberg, M., Karlsson, D., Zlotea, C., & Jansson, U.
- Venue
- Scientific Reports
- Published
- 2016-11-10
- Volume
- 6
- Issue
- 1
- Pages
- 36770-36770
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2549203060
- Cited by
- 504
- References
- 2
- FWCI
- 6.55
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.