CoChat

The Mediterranean Plastic Soup: synthetic polymers in Mediterranean surface waters

Open access

The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.

Abstract

The Mediterranean Sea has been recently proposed as one of the most impacted regions of the world with regards to microplastics, however the polymeric composition of these floating particles is still largely unknown. Here we present the results of a large-scale survey of neustonic micro- and meso-plastics floating in Mediterranean waters, providing the first extensive characterization of their chemical identity as well as detailed information on their abundance and geographical distribution. All particles >700 μm collected in our samples were identified through FT-IR analysis (n = 4050 particles), shedding for the first time light on the polymeric diversity of this emerging pollutant. Sixteen different classes of synthetic materials were identified. Low-density polymers such as polyethylene and polypropylene were the most abundant compounds, followed by polyamides, plastic-based paints, polyvinyl chloride, polystyrene and polyvinyl alcohol. Less frequent polymers included polyethylene terephthalate, polyisoprene, poly(vinyl stearate), ethylene-vinyl acetate, polyepoxide, paraffin wax and polycaprolactone, a biodegradable polyester reported for the first time floating in off-shore waters. Geographical differences in sample composition were also observed, demonstrating sub-basin scale heterogeneity in plastics distribution and likely reflecting a complex interplay between pollution sources, sinks and residence times of different polymers at sea.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/srep37551

Cites

65 of 65 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Size distribution of all particles collected during the survey. Normalized abundance values (red dots) were obtained by dividing the total number of particles counted in each size class (blue bars) by the width of the respective size bin expressed in millimeters8 (n = 14,106). Please note that fibers and filaments were not included and that only particles >700 μm were characterized through FT-IR spectroscopy. Secondary vertical axis is in logarithmic scale.
Figure 1 Size distribution of all particles collected during the survey. Normalized abundance values (red dots) were obtained by dividing the total number of particles counted in each size class (blue bars) by the width of the respective size bin expressed in millimeters8 (n = 14,106). Please note that fibers and filaments were not included and that only particles >700 μm were characterized through FT-IR spectroscopy. Secondary vertical axis is in logarithmic scale.CC BY · PubMed Central
Figure 2 Polymeric composition of all particles >700 μm characterized through ATR FT-IR analysis (n = 4,050 particles). Values are expressed in percentages. Identification of polymers was performed by comparison with a library of standard spectra and only polymers matching reference spectra for more than 60% were accepted.
Figure 2 Polymeric composition of all particles >700 μm characterized through ATR FT-IR analysis (n = 4,050 particles). Values are expressed in percentages. Identification of polymers was performed by comparison with a library of standard spectra and only polymers matching reference spectra for more than 60% were accepted.CC BY · PubMed Central
Figure 3 Map of the central-western Mediterranean Sea showing the location of all sampling stations and the distribution of un-corrected plastic densities expressed as grams of plastic per km2. Size of the circles is proportional to measured concentration values on a logarithmic scale. Particles <700 μm and synthetic fibers were not included in density calculations. Data were plotted using GPS Visualizer (http://www.gpsvisualizer.com/) and post-edited in Adobe Illustrator CS5. Background map freely retrieved from DEMIS OpenGIS Web Map Server under open copyright licence (http://www.demis.nl/home/pages/wms/docs/OpenGISWMS.htm).
Figure 3 Map of the central-western Mediterranean Sea showing the location of all sampling stations and the distribution of un-corrected plastic densities expressed as grams of plastic per km2. Size of the circles is proportional to measured concentration values on a logarithmic scale. Particles <700 μm and synthetic fibers were not included in density calculations. Data were plotted using GPS Visualizer (http://www.gpsvisualizer.com/) and post-edited in Adobe Illustrator CS5. Background map freely retrieved from DEMIS OpenGIS Web Map Server under open copyright licence (http://www.demis.nl/home/pages/wms/docs/OpenGISWMS.htm).CC BY · PubMed Central
Figure 4 Differences between Adriatic (orange) and western Mediterranean samples (black) in the relative frequencies of the most common types of polymers identified through FT-IR analysis (n = 4,050 particles). Differences in the mean total abundance (items/m2) and density (g/km2) of particles collected are also shown in the last two panels.
Figure 4 Differences between Adriatic (orange) and western Mediterranean samples (black) in the relative frequencies of the most common types of polymers identified through FT-IR analysis (n = 4,050 particles). Differences in the mean total abundance (items/m2) and density (g/km2) of particles collected are also shown in the last two panels.CC BY · PubMed Central
Figure 5 PCA ordination based on the occurrence of the seven most common polymer typologies. All 74 samples are plotted in relation to the first two principal components (PC1 and PC2). Orange dots represent Adriatic samples (n = 30) while western Mediterranean samples are in black (n = 44). Distance biplot of the eigenvectors (not in scale with data points) is shown to help with the interpretation of the loadings results.
Figure 5 PCA ordination based on the occurrence of the seven most common polymer typologies. All 74 samples are plotted in relation to the first two principal components (PC1 and PC2). Orange dots represent Adriatic samples (n = 30) while western Mediterranean samples are in black (n = 44). Distance biplot of the eigenvectors (not in scale with data points) is shown to help with the interpretation of the loadings results.CC BY · PubMed Central
Figure 6 Effect of wind-forcing on the concentration of particles >700 µm. Wind-induced friction velocities in water () were computed from wind stress (τ) values extracted from ERA-Interim model using density of seawater ρw = 1.026 g/cm3. Spearman’s correlation coefficient (rs) and p value are shown in the top-right corner (n = 74). The dashed line corresponds to cm/s, above which wind correction was applied56.
Figure 6 Effect of wind-forcing on the concentration of particles >700 µm. Wind-induced friction velocities in water () were computed from wind stress (τ) values extracted from ERA-Interim model using density of seawater ρw = 1.026 g/cm3. Spearman’s correlation coefficient (rs) and p value are shown in the top-right corner (n = 74). The dashed line corresponds to cm/s, above which wind correction was applied56.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 65 references

Cited by

See all 794

Metadata

Authors
Suaria, G., Avio, C. G., Mineo, A., Lattin, G. L., Magaldi, M. G., Belmonte, G., Moore, C. J., Regoli, F., & Aliani, S.
Affiliations
  • Instituto Español de Oceanografía (ES)
  • Marche Polytechnic University (IT)
  • Istituto di Scienze Marine del Consiglio Nazionale delle Ricerche (IT)
  • Johns Hopkins University (US)
  • University of Salento (IT)
Corresponding author
Aliani, Stefano
Venue
Scientific Reports
Published
2016-11-23
Volume
6
Issue
1
Pages
37551-37551
ISSN
2045-2322 (ISSN-L)
OpenAlex
W2552024085
Cited by
791
References
65
Citations by year
2026: 59 · 2025: 66 · 2024: 84 · 2023: 90 · 2022: 118 · 2021: 100 · 2020: 107 · 2019: 66 · 2018: 70 · 2017: 29
FWCI
29.99
Type
journal article
Language
en
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • AIRUS (submittedVersion, public-domain)
  • Università Politecnica delle Marche (Università Politecnica delle Marche) (submittedVersion)
Funders
European Commission (287844)
Topics
  • Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
  • Physical Sciences › Environmental Science › Pollution › Oil Spill Detection and Mitigation
  • Physical Sciences › Environmental Science › Pollution › Pharmaceutical and Antibiotic Environmental Impacts
Keywords
microplastics, mesoplastics, synthetic polymers, Mediterranean Sea, polymer composition, polyethylene, polypropylene, polyvinyl chloride, polystyrene, polyamide, polycaprolactone, biodegradable plastics, plastic pollution, geographic distribution

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.