The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
High-Entropy Metal Diborides: A New Class of High-Entropy Materials and a New Type of Ultrahigh Temperature Ceramics
Open accessAbstract
Seven equimolar, five-component, metal diborides were fabricated via high-energy ball milling and spark plasma sintering. Six of them, including (Hf 0.2 Zr 0.2 Ta 0.2 Nb 0.2 Ti 0.2)B 2, (Hf 0.2 Zr 0.2 Ta 0.2 Mo 0.2 Ti 0.2)B 2, (Hf 0.2 Zr 0.2 Mo 0.2 Nb 0.2 Ti 0.2)B 2, (Hf 0.2 Mo 0.2 Ta 0.2 Nb 0.2 Ti 0.2)B 2, (Mo 0.2 Zr 0.2 Ta 0.2 Nb 0.2 Ti 0.2)B 2, and (Hf 0.2 Zr 0.2 Ta 0.2 Cr 0.2 Ti 0.2)B 2, possess virtually one solid-solution boride phase of the hexagonal AlB 2 structure. Revised Hume-Rothery size-difference factors are used to rationalize the formation of high-entropy solid solutions in these metal diborides. Greater than 92% of the theoretical densities have been generally achieved with largely uniform compositions from nanoscale to microscale. Aberration-corrected scanning transmission electron microscopy (AC STEM), with high-angle annular dark-field and annular bright-field (HAADF and ABF) imaging and nanoscale compositional mapping, has been conducted to confirm the formation of 2-D high-entropy metal layers, separated by rigid 2-D boron nets, without any detectable layered segregation along the c-axis. These materials represent a new type of ultra-high temperature ceramics (UHTCs) as well as a new class of high-entropy materials, which not only exemplify the first high-entropy non-oxide ceramics (borides) fabricated but also possess a unique non-cubic (hexagonal) and layered (quasi-2D) high-entropy crystal structure that markedly differs from all those reported in prior studies. Initial property assessments show that both the hardness and the oxidation resistance of these high-entropy metal diborides are generally higher/better than the average performances of five individual metal diborides made by identical fabrication processing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Self-citationA fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Rost, C. M., Sachet, E., Borman, T., Moballegh, A., Dickey, E. C., Hou, D., Jones, J. L., Curtarolo, S., & Maria, J.-P. (2015) · Nature Communications · doi:10.1038/ncomms9485 · Cited by 3,525
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
Refractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,950
Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Miracle, D. B., & Woodward, C. F. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.02.171 · Cited by 1,856
(1977) · Springer eBooks · doi:10.1007/978-3-642-66620-9 · Cited by 1,021
Room temperature lithium superionic conductivity in high entropy oxides
Bérardan, D., Franger, S., Meena, A. K., & Dragoe, N. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03249d · Cited by 766
Colossal dielectric constant in high entropy oxides
Bérardan, D., Franger, S., Dragoe, D., Meena, A. K., & Dragoe, N. (2016) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.201600043 · Cited by 693
Post, B., Glaser, F. W., & Moskowitz, D. (1954) · Acta Metallurgica · doi:10.1016/0001-6160(54)90090-5 · Cited by 258
Design of Refractory High-Entropy Alloys
Gao, M. C., Carney, C. S., Doğan, Ö. N., Jablonksi, P. D., Hawk, J. A., & Alman, D. E. (2015) · JOM · doi:10.1007/s11837-015-1617-z · Cited by 201
Giant Enhancement of Exchange Coupling in Entropy-Stabilized Oxide Heterostructures
Meisenheimer, P. B., Kratofil, T. J., & Heron, J. T. (2017) · Scientific Reports · doi:10.1038/s41598-017-13810-5 · Cited by 160
The quasiternary TiB2-W2B5-CrB2 system and its possibilities in evolution of ceramic hard materials
Telle, R., Fendler, E., & Pettsov, G. (1993) · Powder Metallurgy and Metal Ceramics · doi:10.1007/bf00559757 · Cited by 14
Cited by
Oses, C., Toher, C., & Curtarolo, S. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0170-8 · Cited by 2,081
High‐Entropy Oxides: Fundamental Aspects and Electrochemical Properties
Sarkar, A., Wang, Q., Schiele, A., Chellali, M. R., Bhattacharya, S. S., Wang, D., Brezesinski, T., Hahn, H., Velasco, L., & Breitung, B. (2019) · Advanced Materials · doi:10.1002/adma.201806236 · Cited by 1,234
Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
Li, Z., Zhao, S., Ritchie, R. O., & Meyers, M. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.12.003 · Cited by 1,171
High-entropy ceramics: Present status, challenges, and a look forward
Xiang, H., Xing, Y., Dai, F.-Z., Wang, H., Su, L., Miao, L., Zhang, G., Wang, Y., Qi, X., Yao, L., et al. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0477-y · Cited by 1,109
High-entropy high-hardness metal carbides discovered by entropy descriptors
Sarker, P., Harrington, T., Toher, C., Oses, C., Samiee, M., Maria, J.-P., Brenner, D. W., Vecchio, K. S., & Curtarolo, S. (2018) · Nature Communications · doi:10.1038/s41467-018-07160-7 · Cited by 1,082
Self-citation
Metadata
- Authors
- Gild, J., Zhang, Y., Harrington, T., Jiang, S., Hu, T., Quinn, M. C., Mellor, W. M., Zhou, N., Vecchio, K., & Luo, J.
- Venue
- Scientific Reports
- Published
- 2016-11-29
- Volume
- 6
- Issue
- 1
- Pages
- 37946-37946
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2557627013
- Cited by
- 1,241
- References
- 13
- FWCI
- 39.25
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.