The DOI matches its Crossref record.
Investigating the highest melting temperature materials: A laser melting study of the TaC-HfC system
Open accessAbstract
TaC, HfC and their solid solutions are promising candidate materials for thermal protection structures in hypersonic vehicles because of their very high melting temperatures (>4000 K) among other properties. The melting temperatures of slightly hypostoichiometric TaC, HfC and three solid solution compositions (Ta 1−x Hf x C, with x = 0.8, 0.5 and 0.2) have long been identified as the highest known. In the current research, they were reassessed, for the first time in the last fifty years, using a laser heating technique. They were found to melt in the range of 4041–4232 K, with HfC having the highest and TaC the lowest. Spectral radiance of the hot samples was measured in situ, showing that the optical emissivity of these compounds plays a fundamental role in their heat balance. Independently, the results show that the melting point for HfC 0.98, (4232 ± 84) K, is the highest recorded for any compound studied until now.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
High-entropy high-hardness metal carbides discovered by entropy descriptors
Sarker, P., Harrington, T., Toher, C., Oses, C., Samiee, M., Maria, J.-P., Brenner, D. W., Vecchio, K. S., & Curtarolo, S. (2018) · Nature Communications · doi:10.1038/s41467-018-07160-7 · Cited by 1,082
Processing and Properties of High-Entropy Ultra-High Temperature Carbides
Castle, E., Csanádi, T., Grasso, S., Dusza, J., & Reece, M. (2018) · Scientific Reports · doi:10.1038/s41598-018-26827-1 · Cited by 873
Self-citationPhase stability and mechanical properties of novel high entropy transition metal carbides
Harrington, T. J., Gild, J., Sarker, P., Toher, C., Rost, C. M., Dippo, O. F., McElfresh, C., Kaufmann, K., Marin, E., Borowski, L., et al. (2019) · Acta Materialia · doi:10.1016/j.actamat.2018.12.054 · Cited by 737
Materials design for hypersonics
Peters, A. B., Zhang, D., Chen, S., Ott, C., Oses, C., Curtarolo, S., McCue, I., Pollock, T. M., & Eswarappa Prameela, S. (2024) · Nature Communications · doi:10.1038/s41467-024-46753-3 · Cited by 478
Fu, Q., Zhang, P., Zhuang, L., Zhou, L., Zhang, J., Wang, J., Hou, X., Riedel, R., & Li, H. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2021.03.076 · Cited by 279
Pfeifer, T. W., Schonfeld, H. B., Scott, E. A., Aller, H. T., Gaskins, J. T., Olson, D. H., Braun, J. L., Graham, S., & Hopkins, P. E. (2025) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-080423-010435 · Cited by 16
Metadata
- Authors
- Cedillos-Barraza, O., Manara, D., Boboridis, K., Watkins, T., Grasso, S., Jayaseelan, D. D., Konings, R. J. M., Reece, M. J., & Lee, W. E.
- Venue
- Scientific Reports
- Published
- 2016-12-01
- Volume
- 6
- Issue
- 1
- Pages
- 37962-37962
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2543391933
- Cited by
- 232
- References
- 0
- FWCI
- 14.20
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.