The DOI matches its Crossref record.
Low-Cost and Durable Bipolar Plates for Proton Exchange Membrane Electrolyzers
Open accessAbstract
Cost reduction and high efficiency are the mayor challenges for sustainable H 2 production via proton exchange membrane (PEM) electrolysis. Titanium-based components such as bipolar plates (BPP) have the largest contribution to the capital cost. This work proposes the use of stainless steel BPPs coated with Nb and Ti by magnetron sputtering physical vapor deposition (PVD) and vacuum plasma spraying (VPS), respectively. The physical properties of the coatings are thoroughly characterized by scanning electron, atomic force microscopies (SEM, AFM); and X-ray diffraction, photoelectron spectroscopies (XRD, XPS). The Ti coating (50 μm) protects the stainless steel substrate against corrosion, while a 50-fold thinner layer of Nb decreases the contact resistance by almost one order of magnitude. The Nb/Ti-coated stainless steel bipolar BPPs endure the harsh environment of the anode for more than 1000 h of operation under nominal conditions, showing a potential use in PEM electrolyzers for large-scale H 2 production from renewables.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Hydrogen production by PEM water electrolysis – A review
Shiva Kumar, S., & Himabindu, V. (2019) · Materials Science for Energy Technologies · doi:10.1016/j.mset.2019.03.002 · Cited by 2,144
Feng, Q., Yuan, X., Liu, G., Wei, B., Zhang, Z., Li, H., & Wang, H. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.006 · Cited by 776
Recent advances in proton exchange membrane water electrolysis
Liu, R.-T., Xu, Z.-L., Li, F.-M., Chen, F.-Y., Yu, J.-Y., Yan, Y., Chen, Y., & Xia, B. Y. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00681b · Cited by 701
Stability of electrocatalytic OER: from principle to application
Li, H., Lin, Y., Duan, J., Wen, Q., Liu, Y., & Zhai, T. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00010a · Cited by 540
The investment costs of electrolysis – A comparison of cost studies from the past 30 years
Saba, S. M., Müller, M., Robinius, M., & Stolten, D. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.11.115 · Cited by 480
2023 Critical Materials Strategy
Bauer, D., Khazdozian, H., Mehta, J., Nguyen, R., Severson, M., Vaagensmith, B., Toba, L., Zhang, B., Hossain, T., Sibal, A., et al. (2023) · doi:10.2172/1998242 · Cited by 480
PEM water electrolysis for hydrogen production: fundamentals, advances, and prospects
Wang, T., Cao, X., & Jiao, L. (2022) · Carbon Neutrality · doi:10.1007/s43979-022-00022-8 · Cited by 389
Salehmin, M. N. I., Husaini, T., Goh, J., & Sulong, A. B. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115985 · Cited by 329
Lettenmeier, P., Kolb, S., Sata, N., Fallisch, A., Zielke, L., Thiele, S., Gago, A. S., & Friedrich, K. A. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01240c · Cited by 296
Self-citation
Metadata
- Authors
- Lettenmeier, P., Wang, R., Abouatallah, R., Saruhan, B., Freitag, O., Gazdzicki, P., Morawietz, T., Hiesgen, R., Gago, A. S., & Friedrich, K. A.
- Venue
- Scientific Reports
- Published
- 2017-03-15
- Volume
- 7
- Issue
- 1
- Pages
- 44035-44035
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2610161060
- Cited by
- 172
- References
- 0
- FWCI
- 3.92
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.