Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Sign Up
Cited by 2,144

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Hydrogen production by PEM water electrolysis – A review

Open access
Shiva Kumar, S., Himabindu, V.·2019·Materials Science for Energy Technologies
DOI 10.1016/j.mset.2019.03.002
Open this paper in CoChat — free account

Abstract

Hydrogen is the most efficient energy carrier. Hydrogen can be obtained from different sources of raw materials including water. Among many hydrogen production methods, eco-friendly and high purity of hydrogen can be obtained by water electrolysis. However, In terms of sustainability and environmental impact, PEM water electrolysis was considered as most promising techniques for high pure efficient hydrogen production from renewable energy sources and emits only oxygen as byproduct without any carbon emissions. Moreover, the produced hydrogen (H 2 ) and oxygen (O 2 ) directly used for fuel cell and industrial applications. However, overall water splitting resulting in only 4% of global industrial hydrogen being produced by electrolysis of water, mainly due to the economic issues. Nowadays, increased the desire production of green hydrogen has increased the interest on PEM water electrolysis. Thus the considerable research has been completed recently in the development of cost effective electrocatalysts for PEM water electrolysis. In this present review, we discussed about the recent developments in the PEM water electrolysis including high performance low cost HER and OER electrocatalysts and their challenges new and old related to electrocatalysts and PEM cell components also addressed. This review will contribute further research improvements and a road map in order to support in developing the PEM water electrolyser as a commercially feasible hydrogen production purpose.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.mset.2019.03.002

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 6 references

Research works printed but not linked: 165

  1. Kazim, 2001, Utilization of solar hydrogen energy in the UAE to maintain its share in the world energy market for the 21st century, Renewable Energy, 24, 259, 10.1016/S0960-1481(00)00199-3 · DOI
  2. Chi, 2018, Water electrolysis based on renewable energy for hydrogen production, Chin. J. Catal., 39, 390, 10.1016/S1872-2067(17)62949-8 · DOI · Paper page
  3. Acar, 2014, Comparative assessment of hydrogen production methods from renewable and non-renewable methods, Int. J. Hydrogen Energy, 39, 1, 10.1016/j.ijhydene.2013.10.060 · DOI · Paper page
  4. Rand, 2011, A journey on the electrochemical road to sustainability, J. Solid State Electrochem., 15, 1579, 10.1007/s10008-011-1410-z · DOI
  5. Züttel, 2004, Hydrogen storage methods, Naturwissenschaften, 91, 157, 10.1007/s00114-004-0516-x · DOI · Paper page
  6. Rakib, 2010, Steam reforming of propane in a fluidized bed membrane reactor for hydrogen production, Int. J. Hydrogen Energy, 35, 6276, 10.1016/j.ijhydene.2010.03.136 · DOI
  7. Lim, 2015, Hydrogen selectivity and permeance effect on the water gas shift reaction (WGSR) in a membrane reactor, Korean J. Chem. Eng., 32, 1522, 10.1007/s11814-014-0359-x · DOI
  8. Lee, 2017, Economic evaluation with sensitivity and profitability analysis for hydrogen production from water electrolysis in Korea, Int. J. Hydrogen Energy, 42, 6462, 10.1016/j.ijhydene.2016.12.153 · DOI · Paper page
  9. Boyano, 2011, Exergoenvironmental analysis of a steam methane reforming process for hydrogen production, Energy, 36, 2202, 10.1016/j.energy.2010.05.020 · DOI · Paper page
  10. Xu, 2009, Effect of boron on the stability of Ni catalysts during steam methane reforming, J. Catal., 261, 158, 10.1016/j.jcat.2008.11.007 · DOI · Paper page
  11. Ligthart, 2011, Influence of particle size on the activity and stability in steam methane reforming of supported Rh nanoparticles, J. Catal., 280, 206, 10.1016/j.jcat.2011.03.015 · DOI · Paper page
  12. Trane, 2012, Catalytic steam reforming of bio-oil, Int. J. Hydrogen Energy, 37, 6447, 10.1016/j.ijhydene.2012.01.023 · DOI · Paper page
  13. Iranshahi, 2011, A dynamic membrane reactor concept for naphtha reforming, considering radial flow patterns for both sweeping gas and reacting materials, Chem. Eng. J., 178, 264, 10.1016/j.cej.2011.08.005 · DOI
  14. Rahimpour, 2013, Progress in catalytic naphtha reforming process: a review, Appl. Energy, 109, 79, 10.1016/j.apenergy.2013.03.080 · DOI · Paper page
  15. Huang, 2014, Parametric analysis and assessment of a coal gasification plant for hydrogen production, Int. J. Hydrogen Energy, 39, 3294, 10.1016/j.ijhydene.2013.12.054 · DOI
  16. Seyitoglu, 2017, Energy and exergy analyses of hydrogen production by coal gasification, Int. J. Hydrogen Energy, 42, 2592, 10.1016/j.ijhydene.2016.08.228 · DOI · Paper page
  17. Burmistrz, 2016, Carbon footprint of the hydrogen production process utilizing subbituminous coal and lignite gasification, J. Cleaner Prod., 139, 858, 10.1016/j.jclepro.2016.08.112 · DOI
  18. Mujeebu, 2016, Hydrogen and syngas production by superadiabatic combustion-a review, Appl. Energy, 173, 210, 10.1016/j.apenergy.2016.04.018 · DOI
  19. Kalinci, 2009, Biomass-based hydrogen production: a review and analysis, Int. J. Hydrogen Energy, 34, 8799, 10.1016/j.ijhydene.2009.08.078 · DOI · Paper page
  20. Abuadala, 2012, A review on biomass-based hydrogen production and potential applications, Int. J. Energy Res., 36, 415, 10.1002/er.1939 · DOI
  21. Levin, 2004, Biohydrogen production and limitations to practical application, Int. J. Hydrogen Energy, 29, 173, 10.1016/S0360-3199(03)00094-6 · DOI · Paper page
  22. Das, 2001, Hydrogen production by biological processes: a survey of literature, Int. J. Hydrogen Energy, 26, 13, 10.1016/S0360-3199(00)00058-6 · DOI · Paper page
  23. Elsharnouby, 2013, A critical literature review on biohydrogen production by pure cultures, Int. J. Hydrogen Energy, 38, 4945, 10.1016/j.ijhydene.2013.02.032 · DOI · Paper page
  24. Sivagurunathan, 2016, Enhancement strategies for hydrogen production from wastewater: a review, Curr. Org. Chem., 20, 2744, 10.2174/1385272820666160513150723 · DOI
  25. Barbir, 2005, PEM electrolysis for production of hydrogen from renewable energy sources, Sol. Energy, 78, 661, 10.1016/j.solener.2004.09.003 · DOI · Paper page
  26. Atlam, 2011, Equivalent electrical model for a proton exchange membrane (PEM) electrolyser, Energy Convers. Manage., 52, 2952, 10.1016/j.enconman.2011.04.007 · DOI · Paper page
  27. Siracusano, 2012, An electrochemical study of a PEM stack for water electrolysis, Int. J. Hydrogen Energy, 37, 1939, 10.1016/j.ijhydene.2011.06.019 · DOI · Paper page
  28. Lee, 2018, Economic feasibility studies of high pressure PEM water electrolysis for distributed H2 refueling stations, Energy Convers. Manage., 162, 139, 10.1016/j.enconman.2018.02.041 · DOI
  29. Borgschulte, 2016, The hydrogen grand challenge, Front. Energy Res., 4, 11, 10.3389/fenrg.2016.00011 · DOI
  30. Holladay, 2009, An overview of hydrogen production technologies, Catal. Today, 139, 244, 10.1016/j.cattod.2008.08.039 · DOI · Paper page
  31. Damyanova, 2012, Ni-based catalysts for reforming of methane with CO2, Int. J. Hydrogen Energy, 37, 15966, 10.1016/j.ijhydene.2012.08.056 · DOI · Paper page
  32. Mamoon Rashid, 2015, Hydrogen production by water electrolysis: a review of alkaline water electrolysis, PEM water electrolysis and high temperature water electrolysis, Int. J. Eng. Adv. Technol., 4, 2249
  33. Foteini Sapountzi, 2017, Electrocatalysts for the generation of hydrogen, oxygen and synthesis gas, Prog. Energy Combust. Sci., 58, 1, 10.1016/j.pecs.2016.09.001 · DOI · Paper page
  34. Cipriani, 2014, Perspective on hydrogen energy carrier and its automotive applications, Int. J. Hydrogen Energy, 39, 8482, 10.1016/j.ijhydene.2014.03.174 · DOI · Paper page
  35. Dunn, 2002, Hydrogen futures: toward a sustainable energy system, Int. J. Hydrogen Energy, 27, 235, 10.1016/S0360-3199(01)00131-8 · DOI · Paper page
  36. Zeng, 2010, Recent progress in alkaline water electrolysis for hydrogen production and applications, Prog. Energy Combust. Sci., 36, 307, 10.1016/j.pecs.2009.11.002 · DOI · Paper page
  37. Shiva Kumar, 2018, Synthesis of Titanium (IV) oxide composite membrane for Hydrogen Production through alkaline water electrolysis, South African, J. Chem. Eng., 25, 54
  38. Shiva Kumar, 2017, Synthesis of Polysulfone and zirconium oxide coated asbestos composite separators for alkaline water electrolysis, Int. J. Chem. Eng. Process Technol., 3, 1035/1-6
  39. Ni, 2008, Technological development of hydrogen production by solid oxide electrolyzer cell (SOEC), Int. J. Hydrogen Energy, 33, 2337, 10.1016/j.ijhydene.2008.02.048 · DOI · Paper page
  40. Laguna-Bercero, 2012, Recent advances in high temperature electrolysis using solid oxide fuel cells: a review, J. Power Sources, 203, 4, 10.1016/j.jpowsour.2011.12.019 · DOI · Paper page
  41. Arico, 2013, Polymer electrolyte membrane water electrolysis: status of technologies and potential applications in combination with renewable power sources, J. Appl. Electrochem., 43, 107, 10.1007/s10800-012-0490-5 · DOI · Paper page
  42. Trasatti, 1999, Water electrolysis: who first, J. Electroanal. Chem., 479, 90, 10.1016/S0022-0728(99)00364-2 · DOI
  43. Balat, 2008, Potential importance of hydrogen as a future solution to environmental and transportation problems, Int. J. Hydrogen Energy, 33, 4013, 10.1016/j.ijhydene.2008.05.047 · DOI · Paper page
  44. Carmo, 2013, A comprehensive review on PEM water electrolysis, Int. J. Hydrogen Energy, 38, 4901, 10.1016/j.ijhydene.2013.01.151 · DOI · Paper page
  45. Ursua, 2012, Hydrogen production from water electrolysis: current status and future trends, Proc. IEEE, 100, 410, 10.1109/JPROC.2011.2156750 · DOI · Paper page
  46. Seetharamana, 2013, Graphene oxide modified non-noble metal electrode for alkaline anion exchange membrane water electrolyzers, Int. J. Hydrogen Energy, 38, 14934, 10.1016/j.ijhydene.2013.09.033 · DOI
  47. Vermeiren, 1998, Evaluation of the Zirfon® separator for use in alkaline water electrolysis and Ni-H2 batteries, Int. J. Hydrogen Energy, 23, 321, 10.1016/S0360-3199(97)00069-4 · DOI · Paper page
  48. Burnat, 2015, Composite membranes for alkaline electrolysis based on polysulfone and mineral fillers, J. Power Sources, 291, 163, 10.1016/j.jpowsour.2015.04.066 · DOI
  49. Marini, 2012, Advanced alkaline water electrolysis, Electrochim. Acta, 82, 384, 10.1016/j.electacta.2012.05.011 · DOI · Paper page
  50. Takashi, 2007, Nickel oxide water electrolysis diaphragm fabricated by a novel method, Int. J. Hydrogen Energy, 32, 5094, 10.1016/j.ijhydene.2007.07.055 · DOI
  51. Chakrabarty, 2008, Preparation, characterization and performance studies of polysulfone membranes using PVP as an additive, J. Membr. Sci., 315, 36, 10.1016/j.memsci.2008.02.027 · DOI · Paper page
  52. Seetharaman, 2011, Polyvinyl alcohol based membrane as separator for alkaline water electrolyzer, Sep. Sci. Technol., 46, 1563, 10.1080/01496395.2011.575427 · DOI
  53. Hwang, 2015, Preparation of anion exchange membrane using polyvinyl chloride (PVC) for alkaline water electrolysis, Korean J. Chem. Eng., 32, 1896, 10.1007/s11814-015-0005-2 · DOI
  54. Marinkas, 2018, Anion-conductive membranes based on 2-mesitylbenzimidazolium functionalised poly-(2,6-dimethyl-1,4-phenylene oxide) and their use in alkaline water electrolysis, Polymer, 145, 242, 10.1016/j.polymer.2018.05.008 · DOI
  55. Sandeep, 2017, Experimental studies and modeling of advanced alkaline water electrolyser with porous nickel electrodes for hydrogen production, Int. J. Hydrogen Energy, 42, 12094, 10.1016/j.ijhydene.2017.03.154 · DOI
  56. Xu, 2010, The effects of ionomer content on PEM water electrolyser membrane electrode assembly performance, Int. J. Hydrogen Energy, 35, 12029, 10.1016/j.ijhydene.2010.08.055 · DOI · Paper page
  57. Dönitz, 1985, High-temperature electrolysis of water vapor-status of development and perspectives for application, Int. J. Hydrogen Energy, 10, 291, 10.1016/0360-3199(85)90181-8 · DOI · Paper page
  58. Brisse, 2008, High temperature water electrolysis in solid oxide cells, Int. J. Hydrogen Energy, 33, 5375, 10.1016/j.ijhydene.2008.07.120 · DOI · Paper page
  59. Liang, 2009, Preparation of LSM-YSZ composite powder for anode of solid oxide electrolysis cell and its activation mechanism, J. Power Sources, 190, 341, 10.1016/j.jpowsour.2008.12.132 · DOI
  60. Moçoteguy, 2013, A review and comprehensive analysis of degradation mechanisms of solid oxide electrolysis cells, Int. J. Hydrogen Energy, 38, 15887, 10.1016/j.ijhydene.2013.09.045 · DOI · Paper page
  61. Rostrup-Nielsen, 2011, 10.1142/p717 · doi:10.1142/p717
  62. Knibbe, 2010, Solid oxide electrolysis cells: degradation at high current densities, J. Electrochem. Soc., 157, B1209, 10.1149/1.3447752 · DOI · Paper page
  63. Grubb, 1959, Batteries with solid ion exchange electrolytes. 1. Secondary cells employing metal electrodes, J. Electrochem. Soc., 106, 275, 10.1149/1.2427329 · DOI
  64. Grubb, 1960, Batteries with solid ion-exchange membrane electrolytes. 2. Low-temperature hydrogen-oxygen fuel cells, J. Electrochem. Soc., 107, 131, 10.1149/1.2427622 · DOI
  65. Russell, 1973, Hydrogen generation by solid polymer electrolyte water electrolysis, Am. Chem. Soc. Div. Fuel Chem. Preprints, 18, 24
  66. Abdol Rahim, 2016, An overview of polymer electrolyte membrane electrolyzer for hydrogen production: Modeling and mass transport, J. Power Sources, 309, 56, 10.1016/j.jpowsour.2016.01.012 · DOI · Paper page
  67. Baykara, 2018, A brief overview on its sources, production and environmental impact, Int. J. Hydrogen Energy, 1
  68. Jua, 2018, A comprehensive review of carbon and hydrocarbon assisted water electrolysis for hydrogen production, Appl. Energy, 231, 502, 10.1016/j.apenergy.2018.09.125 · DOI · Paper page
  69. Nikolaidis, 2017, A comparative overview of hydrogen production processes, Renewable Sustainable Energy Rev., 67, 597, 10.1016/j.rser.2016.09.044 · DOI · Paper page
  70. Grigoriev, 2008, Evaluation of carbon supported Pt and Pd nanoparticles for the hydrogen evolution reaction in PEM water electrolysers, J. Power Sources, 177, 281, 10.1016/j.jpowsour.2007.11.072 · DOI · Paper page
  71. Grigoriev, 2006, Pure hydrogen production by PEM electrolysis for hydrogen energy, Int. J. Hydrogen Energy, 31, 171, 10.1016/j.ijhydene.2005.04.038 · DOI · Paper page
  72. Millet, 2010, PEM water electrolyzers: from electrocatalysis to stack development, Int. J. Hydrogen Energy, 35, 5043, 10.1016/j.ijhydene.2009.09.015 · DOI · Paper page
  73. Cheng, 2009, Study of IrxRu1-xO2 oxides as anodic electrocatalysts for solid polymer electrolyte water electrolysis, Electrochim. Acta, 54, 6250, 10.1016/j.electacta.2009.05.090 · DOI · Paper page
  74. Santana, 2006, Oxygen and chlorine evolution on RuO2 + TiO2 + CeO2+ Nb2O5 mixed oxide electrodes, Electrochim. Acta, 51, 3578, 10.1016/j.electacta.2005.09.050 · DOI
  75. Baglio, 2008, Synthesis, characterization and evaluation of IrO2-RuO2 electrocatalytic powders for oxygen evolution reaction, J New Mater. Electr. Syst., 11, 105
  76. Wu, 2011, Nano-crystalline RuxSn1-xO2 powder catalysts for oxygen evolution reaction in proton exchange membrane water electrolysers, Int. J. Hydrogen Energy, 36, 14796, 10.1016/j.ijhydene.2011.01.067 · DOI
  77. Terezo, 1999, Preparation and characterization of Ti/RuO2-Nb2O5 electrodes obtained by polymeric precursor method, Electrochim. Acta, 44, 4507, 10.1016/S0013-4686(99)00182-6 · DOI
  78. Liu, 2018, Surface determination and electrochemical behavior of IrO2-RuO2- SiO2 ternary oxide coatings in oxygen evolution reaction application, Electrochim. Acta, 264, 350, 10.1016/j.electacta.2018.01.141 · DOI
  79. Kotz, 1986, Stabilization of RuO2 by IrO2 for anodic oxygen evolution in acid media, Electrochim. Acta, 31, 1311, 10.1016/0013-4686(86)80153-0 · DOI · Paper page
  80. Shiva Kumar, 2018, Phosphorus doped carbon nanoparticles supported palladium electrocatalyst for the hydrogen evolution reaction (HER) in PEM water electrolysis, Int. J. Ionics, 24, 3113, 10.1007/s11581-018-2471-0 · DOI
  81. Millet, 2011, Electrochemical performances of PEM water electrolysis cells and perspectives, Int. J. Hydrogen Energy, 36, 4134, 10.1016/j.ijhydene.2010.06.105 · DOI · Paper page
  82. Selamet, 2011, Development and testing of a highly efficient proton exchange membrane (PEM) electrolyzer stack, Int. J. Hydrogen Energy, 36, 11480, 10.1016/j.ijhydene.2011.01.129 · DOI
  83. Yin, 2018, Influence of sloping baffle plates on the mass transport and performance of PEMFC, Int. J. Energy Res., 1
  84. Jakub Mali, 2016, Nafion117 stability under conditions of PEM water electrolysis at elevated temperature and pressure, Int. J. Hydrogen Energy, 41, 2177, 10.1016/j.ijhydene.2015.11.102 · DOI
  85. Millet, 2012, Development and characterisation of a pressurized PEM bi-stack electrolyser, Int. J. Energy Res., 37, 449, 10.1002/er.2916 · doi:10.1002/er.2916
  86. Lettenmeier, 2017, Low-cost and durable bipolar plates for proton exchange membrane electrolyzers, Sci. Rep., 7, 44035, 10.1038/srep44035 · DOI · Paper page
  87. Lædre, 2017, Materials for proton exchange membrane water electrolyzer bipolar plates, Int. J. Hydrogen Energy, 42, 2713, 10.1016/j.ijhydene.2016.11.106 · doi:10.1016/j.ijhydene.2016.11.106
  88. Millet, 2011, Scientific and engineering issues related to PEM technology: water electrolysers, fuel cells and unitized regenerative systems, Int. J. Hydrogen Energy, 36, 4156, 10.1016/j.ijhydene.2010.06.106 · DOI
  89. Gago, 2016, Protective coatings on stainless steel bipolar plates for proton exchange membrane (PEM) electrolysers, J. Power Sources, 307, 815, 10.1016/j.jpowsour.2015.12.071 · DOI · Paper page
  90. Moreira, 2004, Synthesis, characterization and application of a Pd/Vulcan and Pd/C catalyst in a PEM fuel cell, Int. J. Hydrogen Energy, 29, 915, 10.1016/j.ijhydene.2003.06.003 · doi:10.1016/j.ijhydene.2003.06.003
  91. Giacomini, 2003, Characterization of the activity of palladium-modified polythiophene electrodes for the hydrogen oxidation and oxygen reduction reactions, J. Electrochem. Soc., 150, A588, 10.1149/1.1562932 · DOI
  92. Rozain, 2016, Influence of iridium oxide loadings on the performance of PEM waterelectrolysis cells: part I-Pure IrO2-based anodes, Appl. Catal., B, 182, 153, 10.1016/j.apcatb.2015.09.013 · DOI · Paper page
  93. Rozain, 2016, Influence of iridium oxide loadings on the performance of PEM waterelectrolysis cells: Part II – advanced oxygen electrodes, Appl. Catal., B, 182, 153, 10.1016/j.apcatb.2015.09.013 · DOI · Paper page
  94. Yin, 2018, Synthesis of phosphorus-iridium nanocrystals and their superior electrocatalytic activity for oxygen evolution reaction, Elecom
  95. Rozain, 2014, Electrochemical characterization of polymer electrolyte membrane water electrolysis cells, Electrochim. Acta, 131, 160, 10.1016/j.electacta.2014.01.099 · DOI · Paper page
  96. Giancola, 2018, Composite short side chain PFSA membranes for PEM water electrolysis, J. Membr. Sci.
  97. Siracusano, 2013, Electrochemical characterization of a PEM water electrolyzer based on a sulfonated polysulfone membrane, J. Membr. Sci., 448, 209, 10.1016/j.memsci.2013.07.058 · DOI
  98. Ramakrishna, 2016, Nitrogen doped CNTs supported Palladium electrocatalyst for hydrogen evolution reaction in PEM water electrolyser, Int. J. Hydrogen Energy, 41, 20447, 10.1016/j.ijhydene.2016.08.195 · DOI
  99. Martin, 2018, Ten-fold reduction from the state-of-the-art platinum loading of electrodes prepared by electrospraying for high temperature proton exchange membrane fuel cells, Electrochem. Commun., 93, 57, 10.1016/j.elecom.2018.06.007 · DOI
  100. Katherine, 2016, Pathways to ultra-low platinum group metal catalyst loading in proton exchange membrane electrolyzers, Catal. Today, 262, 121, 10.1016/j.cattod.2015.10.019 · DOI · Paper page
  101. Lee, 2016, Polarization characteristics of a low catalyst loading PEM water electrolyzer operating at elevated temperature, J. Power Sources, 309, 127, 10.1016/j.jpowsour.2015.12.139 · DOI
  102. Badwal, 2006, Hydrogen and oxygen generation with polymer electrolyte membrane (PEM) based electrolytic technology, Ionics, 12, 7, 10.1007/s11581-006-0002-x · DOI
  103. Giddey, 2010, High purity oxygen production with a polymer electrolyte membrane electrolyser, J. Membr. Sci., 346, 227, 10.1016/j.memsci.2009.09.042 · DOI
  104. Sarno, 2018, High hydrogen production rate on RuS2@MoS2 hybrid nanocatalyst by PEM electrolysis, Int. J. Hydrogen Energy
  105. Xuan Lam, 2015, Preparation of PdAg and PdAu nanoparticle-loaded carbon black catalysts and their electrocatalytic activity for the glycerol oxidation reaction in alkaline medium, J. Power Sources, 297, 149, 10.1016/j.jpowsour.2015.07.086 · doi:10.1016/j.jpowsour.2015.07.086
  106. Escudero, 2002, Development and performance characterisation of new electrocatalysts for PEMFC, J. Power Sources, 106, 206, 10.1016/S0378-7753(01)01040-0 · DOI
  107. Grigoriev, 2008, Evaluation of carbon-supported Pt and Pd nanoparticles for the hydrogen evolution reaction in PEM water electrolysers, J. Power Sources, 177, 281, 10.1016/j.jpowsour.2007.11.072 · DOI · Paper page
  108. Millet, 2009, GenHyPEM: a research program on PEM water electrolysis supported by the European commission, Int. J. Hydrogen Energy, 34, 4974, 10.1016/j.ijhydene.2008.11.114 · doi:10.1016/j.ijhydene.2008.11.114
  109. Grigoriev, 2011, Platinum and palladium nano-particles supported by graphitic nano-fibers as catalysts for PEM water electrolysis, Int. J. Hydrogen Energy, 36, 4143, 10.1016/j.ijhydene.2010.07.013 · DOI
  110. Wua, 2014, Synthesis and electrocatalytic activity of phosphorus-doped carbon xerogel for oxygen reduction, Electrochim. Acta, 127, 53, 10.1016/j.electacta.2014.02.016 · DOI
  111. Terrones, 2002, N-doping and coalescence of carbon nanotubes: synthesis and electronic properties, Appl. Phys. A, 74, 355, 10.1007/s003390201278 · DOI · Paper page
  112. Li, 2018, Boron-doped carbon nanotubes as metal-free electrocatalyst for dyesensitized solar cells: heteroatom doping level effect on tri-iodide reduction reaction, J. Power Sources, 375, 29, 10.1016/j.jpowsour.2017.11.041 · DOI
  113. Zhou, 2016, Phosphorus/sulfur Co-doped porous carbon with enhanced specific capacitance for supercapacitor and improved catalytic activity for oxygen reduction reaction, J. Power Sources, 314, 39, 10.1016/j.jpowsour.2016.03.009 · DOI · Paper page
  114. Hu, 2002, Degradation mechanism of long service life Ti/IrO2-Ta2O5 oxide anodes in sulphuric acid, Corros. Sci., 44, 1655, 10.1016/S0010-938X(01)00165-2 · doi:10.1016/s0010-938x(01)00165-2
  115. Shiva Kumar, 2018, Phosphorus-doped graphene supported palladium (Pd/PG) electrocatalyst for the hydrogen evolution reaction in PEM water electrolysis, Int. J. Green Energy, 15, 558, 10.1080/15435075.2018.1508468 · DOI
  116. Chen, 2013, Highly active and durable nanostructured molybdenum carbide electrocatalysts for hydrogen production, Energy Environ. Sci., 6, 943, 10.1039/c2ee23891h · DOI · Paper page
  117. Wang, 2015, Highly active and stable hybrid catalyst of cobalt-doped FeS2 nanosheets– carbon nanotubes for hydrogen evolution reaction, J. Am. Chem. Soc., 137, 1587, 10.1021/ja511572q · DOI · Paper page
  118. Barman Kumar, 2018, CoFe nanoalloys encapsulated in N-doped graphene layers as Pt-free multi-functional robust catalyst: elucidating the role of Co-alloying and N-doping, ACS Sustainable Chem. Eng., 6, 12736, 10.1021/acssuschemeng.8b01861 · DOI
  119. Wu, 2015, Metallic WO2–carbon mesoporous nanowires as highly efficient electrocatalysts for hydrogen evolution reaction, J. Am. Chem. Soc., 137, 6983, 10.1021/jacs.5b01330 · DOI · Paper page
  120. Pan, 2015, Carbon nanotubes decorated with nickel phosphide nanoparticles as efficient nanohybrid electrocatalysts for the hydrogen evolution reaction, J. Mater. Chem. A, 3, 13087, 10.1039/C5TA02128F · DOI · Paper page
  121. Trasatti, 1971, Ruthenium dioxide – new interesting electrode material – solid state structure and electrochemical behavior, J. Electroanal. Chem., 29, A1, 10.1016/S0022-0728(71)80111-0 · DOI · Paper page
  122. Sun, 2018, Earth-abundant electrocatalysts in proton exchange membrane electrolyzers, Catalysts, 8, 657, 10.3390/catal8120657 · DOI
  123. Cherevko, 2018, Stability and dissolution of electrocatalysts: Building the bridge between model and “real world” systems, Curr. Opin. Electrochem., 8, 118, 10.1016/j.coelec.2018.03.034 · DOI · Paper page
  124. Mayousse, 2011, Synthesis and characterization of electrocatalysts for the oxygen evolution in PEM water electrolysis, Int. J. Hydrogen Energy, 36, 10474, 10.1016/j.ijhydene.2011.05.139 · DOI
  125. Siracusanoa, 2015, Nanosized IrOx and IrRuOx electrocatalysts for the O2 evolution reaction in PEM water electrolysers, Appl. Catal., B, 164, 488, 10.1016/j.apcatb.2014.09.005 · DOI · Paper page
  126. Li, 2012, Zeolite-templated IrxRu1− xO2 electrocatalysts for oxygen evolution reaction in solid polymer electrolyte water electrolyzers, Int. J. Hydrogen Energy, 37, 16786, 10.1016/j.ijhydene.2012.08.087 · DOI
  127. Kalliopi Papazisi, 2012, Preparation and characterization of IrxPt1-xO2 anode electrocatalysts for the oxygen evolution reaction, Int. J. Hydrogen Energy, 37, 16642, 10.1016/j.ijhydene.2012.02.118 · doi:10.1016/j.ijhydene.2012.02.118
  128. Morimitsu, 2000, Effects of cathodizing on the morphology and composition IrO2-Ta2O5/Ti anodes, Electrochim. Acta, 46, 401, 10.1016/S0013-4686(00)00598-3 · DOI
  129. De Oliveira-Sousa, 2000, Lima-Neto, Influence of the preparation method on the morphological and electrochemical properties of Ti/IrO2-coated electrodes, Electrochim. Acta, 45, 4467, 10.1016/S0013-4686(00)00508-9 · DOI
  130. Chuanpu, 2016, Investigation of mesoporous niobium-doped TiO2 as an oxygen evolution catalyst support in an SPE water electrolyzer, ACS Sustainable Chem. Eng., 4, 746, 10.1021/acssuschemeng.5b00531 · DOI
  131. Petr, 2012, Non-conductive TiO2 as the anode catalyst support for PEM water electrolysis, Int. J. Hydrogen Energy, 37, 12081, 10.1016/j.ijhydene.2012.05.129 · DOI
  132. Ju, 2017, The role of nanosized SnO2 in Pt-based electrocatalysts for hydrogen production in methanol assisted water electrolysis, Electrochim. Acta, 229, 39, 10.1016/j.electacta.2017.01.106 · doi:10.1016/j.electacta.2017.01.106
  133. De Faria, 1996, Electroanalytical properties of ternary oxide mixtures of composition Ru0.3Ti(0.7-x)CexO2: oxygen evolution from acidic solution, J. Appl. Electrochem., 26, 1195, 10.1007/BF00243745 · DOI
  134. Terezo, 2001, Separation of transport, charge storage and reaction processes of porous electrocatalytic IrO2 and IrO2/Nb2O5 electrodes, J. Electroanal. Chem., 508, 59, 10.1016/S0022-0728(01)00522-8 · DOI
  135. Chen, 2002, Electrochemical behavior of novel Ti/IrOx-Sb2O-SnO2 anodes, J. Phys. Chem. B, 106, 4364, 10.1021/jp013547o · DOI
  136. Yu, 2018, Proton exchange membrane water electrolysis system-membrane electrode assembly with additive, Int. J. Hydrogen Energy
  137. Ma, 2016, Oxygen evolution and corrosion behavior of low-MnO2-content Pb-MnO2 composite anodes for metal electro winning, Hydrometallurgy, 159, 6, 10.1016/j.hydromet.2015.10.031 · doi:10.1016/j.hydromet.2015.10.031
  138. Themsirimongko, 2016, Noble metal and Mn3O4 supported carbon nanotubes: enhanced catalysts for ethanol electrooxidation, Int. J. Electrochem. Sci., 11, 967, 10.1016/S1452-3981(23)15898-6 · doi:10.1016/s1452-3981(23)15898-6
  139. Corona-Guinto, 2013, Performance of a PEM electrolyzer using RuIrCoOx electrocatalysts for the oxygen evolution electrode, Int. J. Hydrogen Energy, 38, 12667, 10.1016/j.ijhydene.2012.12.071 · DOI
  140. Vinod Kumar, 2014, Investigation of supported IrO2 as electrocatalyst for the oxygen evolution reaction in proton exchange membrane water electrolyser, Int. J. Hydrogen Energy, 39, 1905, 10.1016/j.ijhydene.2013.11.056 · DOI
  141. Karan, 2014, Fluorine doped (Ir, Sn, Nb)O2 anode electro-catalyst for oxygen evolution via PEM based water electrolysis, Int. J. Hydrogen Energy, 39, 664, 10.1016/j.ijhydene.2013.10.123 · DOI
  142. Vinod Kumar, 2013, RuxNb1-xO2 catalyst for the oxygen evolution reaction in proton exchange membrane water electrolysers, Int. J. Hydrogen Energy, 38, 8605, 10.1016/j.ijhydene.2013.04.100 · DOI
  143. Ardizzone, 2006, Composite ternary SnO2/IrO2/Ta2O5 oxide electrocatalysts, J. Electroanal. Chem., 589, 160, 10.1016/j.jelechem.2006.02.004 · DOI
  144. Audichon, 2015, Effect of adding CeO2 to RuO2–IrO2 mixed nanocatalysts: activity towards the oxygen evolution reaction and stability in acidic media, ChemElectroChem, 2, 1128, 10.1002/celc.201500072 · DOI
  145. Datta, 2013, High performance robust F-doped tin oxide based oxygen evolution electro-catalysts for PEM based water electrolysis, J. Mater. Chem. A, 1, 4026, 10.1039/c3ta01458d · doi:10.1039/c3ta01458d
  146. Shrinath Dattatray, 2018, First report of vertically aligned (Sn, Ir)O2: F solid solution nanotubes: highly efficient and robust oxygen evolution electrocatalysts for proton exchange membrane based water electrolysis, J. Power Sources, 392, 139, 10.1016/j.jpowsour.2018.04.065 · DOI
  147. Marshall, 2007, Performance of a PEM water electrolysis cell using IrxRuyTazO2 electrocatalysts for the oxygen evolution electrode, Int. J. Hydrogen Energy, 32, 2320, 10.1016/j.ijhydene.2007.02.013 · DOI · Paper page
  148. Lim, 2013, Highly stable RuO2/SnO2 nanocomposites as anode electrocatalysts in a PEM water electrolysis cell, Int. J. Energy Res., 37, 875
  149. Grigoriev, 2009, Hydrogen safety aspects related to high-pressure polymer electrolyte membrane water electrolysis, Int. J. Hydrogen Energy, 34, 5986, 10.1016/j.ijhydene.2009.01.047 · DOI · Paper page
  150. Zhang, 2007, Study on a novel manufacturing process of membrane electrode assemblies for solid polymer electrolyte water electrolysis, Electrochem. Com., 9, 667, 10.1016/j.elecom.2006.10.048 · DOI
  151. Ma, 2006, Study of ruthenium oxide catalyst for electrocatalytic performance in oxygen evolution, J. Mol. Catal. A: Chem., 247, 7, 10.1016/j.molcata.2005.11.013 · DOI
  152. Cheng, 2009, Study of Ir(x)Ru(1–x)O(2) oxides as anodic electrocatalysts for solid polymer electrolyte water electrolysis, Electrochim. Acta, 54, 6250, 10.1016/j.electacta.2009.05.090 · DOI · Paper page
  153. Song, 2008, Electrochemical investigation of electrocatalysts for the oxygen evolution reaction in PEM water electrolyzers, Int. J. Hydrogen Energy, 33, 4955, 10.1016/j.ijhydene.2008.06.039 · DOI · Paper page
  154. Burke, 1971, Oxygen electrode reaction. Part 1. Nature of inhibition process, Trans. Faraday Soc., 67, 3550, 10.1039/TF9716703550 · doi:10.1039/tf9716703550
  155. Xu, 2011, A novel catalyst layer with hydrophilic-hydropholbic meshwork and pore structure for solid polymer electrolyte water electrolysis, Electrochem. Commun., 13, 437, 10.1016/j.elecom.2011.02.014 · doi:10.1016/j.elecom.2011.02.014
  156. Shiva Kumar, 2018, Palladium supported on phosphorus–nitrogen dual doped carbon nanoparticles as cathode for hydrogen evolution in PEM water electrolyser, Ionics, 10.1007/s11581-018-2471-0 · DOI
  157. Shiva Kumar, 2018, Preparation of RuxPd1-xO2 electrocatalysts for the oxygen evolution reaction (OER) in PEM water electrolysis, Ionics, 24, 2411, 10.1007/s11581-017-2359-4 · DOI
  158. Audichon, 2014, Electroactivity of RuO2-IrO2 mixed nanocatalysts toward the oxygen evolution reaction in a water electrolyzer supplied by a solar profile, Int. J. Hydrogen Energy, 39, 16785, 10.1016/j.ijhydene.2014.07.170 · DOI · Paper page
  159. Fırtına, 2011, Preparation and characterization of membrane electrode assembly (MEA) for PEMFC, Int. J. Energy Res., 35, 146, 10.1002/er.1773 · DOI
  160. Immerz, 2018, Effect of the MEA design on the performance of PEMWE single cells with different sizes, J. Appl. Electrochem., 48, 701, 10.1007/s10800-018-1178-2 · DOI
  161. Grigoriev, 2009, Optimization of porous current collectors for PEM water electrolysers, Int. J. Hydrogen Energy, 34, 4968, 10.1016/j.ijhydene.2008.11.056 · DOI · Paper page
  162. Majasan, 2018, Two-phase flow behaviour and performance of polymer electrolyte membrane electrolysers: electrochemical and optical characterization, Int. J. Hydrogen Energy, 43, 15659, 10.1016/j.ijhydene.2018.07.003 · doi:10.1016/j.ijhydene.2018.07.003
  163. Kadier, 2016, A comprehensive review of microbial electrolysis cells (MEC) reactor designs and configurations for sustainable hydrogen gas production, Alexandria Eng. J., 55, 427, 10.1016/j.aej.2015.10.008 · DOI · Paper page
  164. Liu, 2005, Electrochemically assisted microbial production of hydrogen from acetate, Environ. Sci. Technol., 39, 4317, 10.1021/es050244p · DOI · Paper page
  165. Kadier, 2016, Recent advances and emerging challenges in microbial electrolysis cells (MECs) for microbial production of hydrogen and value-added chemicals, Renewable Sustainable Energy Rev., 61, 501, 10.1016/j.rser.2016.04.017 · DOI · Paper page

Cited by

See all 2,144

Metadata

Authors
Shiva Kumar, S., & Himabindu, V.
Venue
Materials Science for Energy Technologies
Publisher
Elsevier BV
Published
2019-12
Volume
2
Issue
3
Pages
442-454
ISSN
2589-2991 (ISSN-L)
DOI
10.1016/j.mset.2019.03.002
OpenAlex
W2947992368
Cited by
2,144
References
6
FWCI
36.13
Type
journal article
Language
en
Open access
gold
Licence
Funders
  • Department of Atomic Energy, Government of India (2013/36/21/BRNS/1739)
  • Bhabha Atomic Research Centre
  • Board of Research in Nuclear Sciences

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Hydrogen production by PEM water electrolysis – A review. https://app.cochat.ai/papers/10.1016/j.mset.2019.03.002
The paper
Shiva Kumar, S., & Himabindu, V. (2019). Hydrogen production by PEM water electrolysis – A review. Materials Science for Energy Technologies. https://doi.org/10.1016/j.mset.2019.03.002

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.