The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
The mechanisms of pyrrole electropolymerization
Abstract
Over the past twenty years, polypyrrole has appeared as the most extensively studied conducting polymer. However, despite the volume of work already done in this area, there has been little focus put on the mechanism of polypyrrole synthesis, especially concerning the most efficient method, electropolymerization. Numerous analytical techniques have been used to study polypyrrole electrodeposition and/or doping. However, the mechanism itself is still a controversial subject as there is not one mechanism which is universally accepted. The mechanism proposed by Diaz is the one most commonly referred to in the literature although several other mechanisms are not lacking in support. The controversy lies in the initiation step as each mechanism proposes a different way of beginning the reaction, varying between electron transfer, proton transfer and direct radical pyrrole formation. Without considering the initiation step, there are many other factors including electrolyte, solvent, temperature and pH which can influence the reaction mechanism during the electropolymerization of pyrrole, thus impacting the characteristics of the polymer formed at the electrode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electroluminescence in conjugated polymers
Friend, R. H., Gymer, R. W., Holmes, A. B., Burroughes, J. H., Marks, R. N., Taliani, C., Bradley, D. D. C., Santos, D. A. D., Brédas, J. L., Lögdlund, M., et al. (1999) · Nature · doi:10.1038/16393 · Cited by 5,977
Electrochemistry of conducting polypyrrole films
Diaz, A. F., Castillo, J. I., Logan, J. A., & Lee, W.-Y. (1981) · Journal of Electroanalytical Chemistry and Interfacial Electrochemistry · doi:10.1016/s0022-0728(81)80008-3 · Cited by 924
Spectroelectrochemical study of polypyrrole films
Genies, E. M., Bidan, G., & Diaz, A. F. (1983) · Journal of Electroanalytical Chemistry and Interfacial Electrochemistry · doi:10.1016/s0022-0728(83)80561-0 · Cited by 651
The electrodeposition of polypyrrole films from aqueous solutions
Asavapiriyanont, S., Chandler, G. K., Gunawardena, G., & Pletcher, D. (1984) · Journal of Electroanalytical Chemistry · doi:10.1016/0022-0728(84)80225-9 · Cited by 551
Waltman, R. J., & Bargon, J. (1986) · Canadian Journal of Chemistry · doi:10.1139/v86-015 · Cited by 518
Trapping Light in Polymer Photodiodes with Soft Embossed Gratings
Roman, L. S., Inganäs, O., Granlund, T., Nyberg, T., Svensson, M., Andersson, M. R., & Hummelen, J. C. (2000) · Advanced Materials · doi:10.1002/(sici)1521-4095(200002)12:3<222::aid-adma222>3.0.co;2-d · Cited by 174
Silk, T., Hong, Q., Tamm, J., et al. (1998) · Synthetic Metals · doi:10.1016/s0379-6779(98)80132-x · Cited by 71
Real Time Spectroscopic Ellipsometry: In Situ Characterization of Pyrrole Electropolymerization
Kim, Y.-T., Collins, R. W., Vedam, K., & Allara, D. L. (1991) · Journal of The Electrochemical Society · doi:10.1149/1.2085401 · Cited by 65
Krishna, V., Ho, Y.-H., Basak, S., et al. (1991) · Journal of the American Chemical Society · doi:10.1021/ja00009a017 · Cited by 44
Cited by
Synthesis of Conjugated Polymers for Organic Solar Cell Applications
Cheng, Y.-J., Yang, S.-H., & Hsu, C.-S. (2009) · Chemical Reviews · doi:10.1021/cr900182s · Cited by 3,972
Organic Carbonates as Solvents in Synthesis and Catalysis
Schäffner, B., Schäffner, F., Verevkin, S. P., & Börner, A. (2010) · Chemical Reviews · doi:10.1021/cr900393d · Cited by 1,273
Electrochemistry of Conducting Polymers—Persistent Models and New Concepts
Heinze, J., Frontana-Uribe, B. A., & Ludwigs, S. (2010) · Chemical Reviews · doi:10.1021/cr900226k · Cited by 1,258
Nanostructured Polypyrrole as a flexible electrode material of supercapacitor
Huang, Y., Li, H., Wang, Z., Zhu, M., Pei, Z., Xue, Q., Huang, Y., & Zhi, C. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.047 · Cited by 841
Conducting polymer nanomaterials: electrosynthesis and applications
Li, C., Bai, H., & Shi, G. (2009) · Chemical Society Reviews · doi:10.1039/b816681c · Cited by 687
Novel Multifunctional Polymers from Aromatic Diamines by Oxidative Polymerizations
Li, X.-G., Huang, M.-R., Duan, W., & Yang, Y.-L. (2002) · Chemical Reviews · doi:10.1021/cr010423z · Cited by 682
Opportunities and challenges in liquid cell electron microscopy
Ross, F. M. (2015) · Science · doi:10.1126/science.aaa9886 · Cited by 609
Zhao, Y., Li, Z., Song, S., Yang, K., Liu, H., Yang, Z., Wang, J., Yang, B., & Lin, Q. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901474 · Cited by 528
Conducting Polymers in the Fields of Energy, Environmental Remediation, and Chemical–Chiral Sensors
Ibanez, J. G., Rincón, M. E., Gutierrez-Granados, S., Chahma, M., Jaramillo-Quintero, O. A., & Frontana-Uribe, B. A. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00482 · Cited by 493
Electrochemically synthesized polymers in molecular imprinting for chemical sensing
Sharma, P. S., Pietrzyk-Le, A., D’Souza, F., & Kutner, W. (2012) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-011-5696-6 · Cited by 459
Zhang, N., Samanta, S. R., Rosen, B. M., & Percec, V. (2014) · Chemical Reviews · doi:10.1021/cr400689s · Cited by 458
Multifunctional Nanostructured Conductive Polymer Gels: Synthesis, Properties, and Applications
Zhao, F., Shi, Y., Pan, L., & Yu, G. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00191 · Cited by 457
Conducting Polymer Nanomaterials and Their Applications
Jang, J. (2006) · Advances in Polymer Science · doi:10.1007/12_075 · Cited by 425
In situ polymerization process: an essential design tool for lithium polymer batteries
Vijayakumar, V., Anothumakkool, B., Kurungot, S., Winter, M., & Nair, J. R. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03527k · Cited by 365
Molecularly imprinted polymer-based electrochemical sensors for environmental analysis
Rebelo, P., Costa-Rama, E., Seguro, I., Pacheco, J. G., Nouws, H. P. A., Cordeiro, M. N. D. S., & Delerue-Matos, C. (2021) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2020.112719 · Cited by 325
Conducting polymers for electrochemical DNA sensing
Peng, H., Zhang, L., Soeller, C., & Travas-Sejdic, J. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.065 · Cited by 315
Biomimetic electrochemistry from conducting polymers. A review
Otero, T. F., Martinez, J. G., & Arias-Pardilla, J. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.097 · Cited by 292
Cao, J., Wang, Y., Chen, J., Li, X., Walsh, F. C., Ouyang, J.-H., Jia, D., & Zhou, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02920a · Cited by 273
Choudhary, R. B., Ansari, S., & Purty, B. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101302 · Cited by 265
Combinatorial and High-Throughput Development of Sensing Materials: The First 10 Years
Potyrailo, R. A., & Mirsky, V. M. (2008) · Chemical Reviews · doi:10.1021/cr068127f · Cited by 258
Lv, H., Pan, Q., Song, Y., Liu, X.-X., & Liu, T. (2020) · Nano-Micro Letters · doi:10.1007/s40820-020-00451-z · Cited by 254
Wang, T., Zhuo, J., Du, K., Chen, B., Zhu, Z., Shao, Y., & Li, M. (2014) · Advanced Materials · doi:10.1002/adma.201400265 · Cited by 201
Sood, Y., Singh, K., Mudila, H., Lokhande, P. E., Singh, L., Kumar, D., Kumar, A., Mubarak, N. M., & Dehghani, M. H. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e33643 · Cited by 106
Xia, Z., Wang, S., Jiang, L., Sun, H., & Sun, G. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.013 · Cited by 44
Metadata
- Authors
- Sabouraud, G., Sadki, S., & Brodie, N.
- Venue
- Chemical Society Reviews
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2000
- Volume
- 29
- Issue
- 5
- Pages
- 283-293
- ISSN
- 0306-0012 (ISSN-L)
- 1460-4744
- OpenAlex
- W2037866782
- Cited by
- 1,052
- References
- 9
- FWCI
- 27.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.