The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Layered double hydroxides with the hydrotalcite-type structure containing Cu2+, Ni2+ and Al3+
Abstract
Layered double hydroxides (LDHs) with the hydrotalcite-like structure have been prepared containing different amounts of Ni2+, Cu2+ and Al3+ in the brucite-like layers by a coprecipitation method. The samples have been characterized by elemental chemical analysis, powder X-ray diffraction, differential thermal analysis and thermogravimetric analysis, FT-IR and UV–VIS diffuse reflectance spectroscopies, temperature-programmed reduction, and specific surface area and porosity assessment by N2 adsorption at −196 °C. The nature of the phase obtained, crystallinity of the HT-like phase and thermal behaviour of these materials were influenced by MII/Al atomic composition and concentration of bivalent metal ion. Calcination at 500 °C leads to mostly amorphous solids containing NiO, and also CuO (tenorite) for large Cu2+ contents (Cu/Ni molar ratio equal to 4). When the calcination temperature is increased to 850 °C, crystallization of well defined phases (NiO, CuO and NiAl2O4, depending on the relative amounts of Ni, Cu and Al) takes place. Reduction of Cu2+ species in these samples takes place at a lower temperature than that for Ni2+, while the temperature of reduction of nickel is increased with an increase in aluminium and copper content of the samples.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Cited by
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Intercalation chemistry of layered double hydroxides: recent developments and applications
Khan, A. I., & O’Hare, D. (2002) · J. Mater. Chem. · doi:10.1039/b204076j · Cited by 1,196
Characterisation of layered double hydroxides and their decomposition products
Rives, V. (2002) · Materials Chemistry and Physics · doi:10.1016/s0254-0584(02)00024-x · Cited by 405
Self-citationGe, X., Gu, C., Wang, X., & Tu, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01659j · Cited by 372
Shao, M., Han, J., Wei, M., Evans, D. G., & Duan, X. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.01.016 · Cited by 310
Metadata
- Authors
- Rives, V., & Kannan, S.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2000
- Volume
- 10
- Issue
- 2
- Pages
- 489-495
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2166475722
- Cited by
- 250
- References
- 1
- FWCI
- 6.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.