The DOI matches its Crossref record.
Solid–liquid reaction synthesis of layered machinable Ti3AlC2 ceramic
Abstract
Fully dense polycrystalline Ti3AlC2 was fabricated by a solid–liquid reaction synthesis and simultaneous in-situ hot pressing of a mixture of Ti, Al and graphite powders at 1500 °C and 25 MPa for 5 minutes and subsequently annealing at 1200 °C for 20 minutes. The effects of various parameters including composition of the initial elemental powders, temperature as well as the hot pressing pressure on the purity, formation and densification of Ti3AlC2 were examined. In addition, the reaction path for the formation of Ti3AlC2 was investigated by DTA, XRD, SEM and EDS, suggesting that the reaction path during the heating process could be reasonably described as follows: Al powder melted at some 660 °C and coated the Ti particles; at about 740 °C the exothermic reactions between Al and Ti occurred and Ti–Al intermetallics like TiAl and Ti3Al were formed; the diffusion of carbon in the Ti–Al intermetallics at elevated temperature resulted in the carbides Ti2AlC, Ti3AlC and TiC; and finally these carbides and the unreacted graphite reacted at about 1420 °C to yield Ti3AlC2.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Hu, M., Li, Z., Hu, T., Zhu, S., Zhang, C., & Wang, X. (2016) · ACS Nano · doi:10.1021/acsnano.6b06597 · Cited by 555
Self-citationRetractedMahmood, M., Rasheed, A., Ayman, I., Rasheed, T., Munir, S., Ajmal, S., Agboola, P. O., Warsi, M. F., & Shahid, M. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03939 · Cited by 253
Metadata
- Authors
- Wang, X., & Zhou, Y.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2002-01-24
- Volume
- 12
- Issue
- 3
- Pages
- 455-460
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2148082873
- Cited by
- 267
- References
- 0
- FWCI
- 5.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Solid–liquid reaction synthesis of layered machinable Ti3AlC2 ceramic. https://app.cochat.ai/papers/10.1039/b108685e
- The paper
- Wang, X., & Zhou, Y. (2002). Solid–liquid reaction synthesis of layered machinable Ti3AlC2 ceramic. Journal of Materials Chemistry. https://doi.org/10.1039/b108685e
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
