The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
The effect of hydrothermal conditions on the mesoporous structure of TiO2 nanotubes
Abstract
A systematic analysis of the influence of preparation conditions in the alkali hydrothermal synthesis on the morphology of TiO2 nanotubes is performed using HRTEM and low temperature nitrogen adsorption. The possible mechanisms of nanotube formation are reviewed and a mechanism based on the key stage of wrapping of intermediate multilayered titanate nanosheets is suggested. The driving force for wrapping is considered to be the mechanical stress arising during crystallisation/dissolution. The average diameter of the nanotubes was found to depend on the temperature and on the ratio of weight of TiO2 to the volume of sodium hydroxide solution. An increase in the temperature from 120 to 150 °C results in an increase in the average nanotube diameter. Subsequent increases in the temperature result in the formation of non-hollow TiO2 nanofibers with an average diameter of 75 nm, a wide distribution in diameter and a length in excess of 10 µm. The increase of the TiO2 : NaOH molar ratio results in an increase in the average diameter of nanotubes and a decrease of surface area. The average inner diameter of TiO2 nanotubes varied between 2 and 10 nm. The pore-size distribution was evaluated from TEM, and low-temperature nitrogen adsorption data using the BJH method. It was shown that nitrogen adsorption is a suitable method for characterisation of the pore morphology of nanotubes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Helical microtubules of graphitic carbon
Iijima, S. (1991) · Nature · doi:10.1038/354056a0 · Cited by 43,098
Formation of Titanium Oxide Nanotube
Kasuga, T., Hiramatsu, M., Hoson, A., Sekino, T., & Niihara, K. (1998) · Langmuir · doi:10.1021/la9713816 · Cited by 2,475
Titanium oxide nanotube arrays prepared by anodic oxidation
Gong, D., Grimes, C. A., Varghese, O. K., Hu, W., Singh, R. S., Chen, Z., & Dickey, E. C. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0457 · Cited by 2,041
Titania Nanotubes Prepared by Chemical Processing
Kasuga, T., Hiramatsu, M., Hoson, A., Sekino, T., & Niihara, K. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199910)11:15<1307::aid-adma1307>3.0.co;2-h · Cited by 1,576
Physical Adsorption on Non-Uniform Surfaces
Halsey, G. (1948) · The Journal of Chemical Physics · doi:10.1063/1.1746689 · Cited by 1,472
Kruk, M., Jaroniec, M., & Sayari, A. (1997) · Langmuir · doi:10.1021/la970776m · Cited by 1,428
Extreme Changes in the Electrical Resistance of Titania Nanotubes with Hydrogen Exposure
Varghese, O. K., Gong, D., Paulose, M., Ong, K. G., Dickey, E. C., & Grimes, C. A. (2003) · Advanced Materials · doi:10.1002/adma.200304586 · Cited by 675
Jung, J. H., Kobayashi, H., van Bommel, K. J. C., Shinkai, S., & Shimizu, T. (2002) · Chemistry of Materials · doi:10.1021/cm011625e · Cited by 399
Non-carbon nanotubes: synthesis and simulation
Ivanovskii, A. L. (2002) · Russian Chemical Reviews · doi:10.1070/rc2002v071n03abeh000709 · Cited by 128
Cao, J., Sun, J. Z., Li, H., et al. (2004) · Journal of Materials Chemistry · doi:10.1039/b313541a · Cited by 102
Platinum-filled oxidic nanotubes
Hippe, C., Wark, M., Lork, E., & Schulz‐Ekloff, G. (1999) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(99)90074-4 · Cited by 63
Miyata, T., Endo, A., Ohmori, T., et al. (2003) · Journal of Colloid and Interface Science · doi:10.1016/s0021-9797(02)00254-0 · Cited by 51
Zhang, X., Wang, W., Chen, J., & Shen, Z. (2003) · Langmuir · doi:10.1021/la026924c · Cited by 26
Cited by
Titanium Dioxide Nanomaterials: Synthesis, Properties, Modifications, and Applications
Chen, X., & Mao, S. S. (2007) · Chemical Reviews · doi:10.1021/cr0500535 · Cited by 10,688
Protonated Titanates and TiO2 Nanostructured Materials: Synthesis, Properties, and Applications
Bavykin, D. V., Friedrich, J. M., & Walsh, F. C. (2006) · Advanced Materials · doi:10.1002/adma.200502696 · Cited by 1,634
Self-citationOne-Dimensional Titanium Dioxide Nanomaterials: Nanotubes
Lee, K., Mazare, A., & Schmuki, P. (2014) · Chemical Reviews · doi:10.1021/cr500061m · Cited by 1,185
A review of one-dimensional TiO2nanostructured materials for environmental and energy applications
Ge, M., Cao, C., Huang, J., Li, S., Chen, Z., Zhang, K.-Q., Al-Deyab, S. S., & Lai, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09323f · Cited by 930
Devan, R. S., Patil, R. A., Lin, J., & Ma, Y. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201201008 · Cited by 813
Metadata
- Authors
- Bavykin, D. V., Parmon, V. N., Lapkin, A. A., & Walsh, F. C.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2004
- Volume
- 14
- Issue
- 22
- Pages
- 3370
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2109562149
- Cited by
- 725
- References
- 13
- FWCI
- 14.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.