The DOI matches its Crossref record; 81 of the 81 references it cites were found in a registry or an index.
Mechanical properties of hybrid organic–inorganic materials
Abstract
Homogeneously dispersed organic–inorganic hybrid nanocomposites can be obtained by increasing the interfacial interactions between both components via the formation of hydrogen bonds or covalent bonds, by mixing various polymers or via the adequate choice of the inorganic precursors. The mechanical response of these advanced functional materials is an issue of paramount importance when industrial applications are targeted. Large progress in the understanding of the mechanical properties of O–I hybrids has been gained by testing these materials under different conditions (static and dynamic, low and large deformations up to fracture) and using specific techniques developed for the mechanical characterization of conventional materials such as polymers, glasses or ceramics. However, the mechanical properties of hybrid O–I materials are dependent on their micro- and nanostructures and on the nature and extent of the O–I interfaces. Consequently, predictable mechanical properties for hybrids still represent a major challenge for hybrid materials science. Industrial attraction for hybrid materials has been emphasized by the development of new functional coatings. An important issue is the interface between the film and the substrate since strong adhesion can be tailored and ensures that delamination of the film will be limited.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Reuss, A. (1929) · ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik · doi:10.1002/zamm.19290090104 · Cited by 6,338
(1990) · Elsevier eBooks · doi:10.1016/c2009-0-22386-5 · Cited by 3,192
Sol-gel chemistry of transition metal oxides
Livage, J., Henry, M., & Sanchez, C. (1988) · Progress in Solid State Chemistry · doi:10.1016/0079-6786(88)90005-2 · Cited by 2,323
Self-citationSoler-Illia, G. J. D. A. A., Sanchez, C., Lebeau, B., & Patarin, J. (2002) · Chemical Reviews · doi:10.1021/cr0200062 · Cited by 1,958
Self-citationBiomimetism and bioinspiration as tools for the design of innovative materials and systems
Sanchez, C., Arribart, H., & Giraud Guille, M. M. (2005) · Nature Materials · doi:10.1038/nmat1339 · Cited by 1,449
Self-citationHybrid Nanocomposite Materials—between inorganic glasses and organic polymers
Novak, B. M. (1993) · Advanced Materials · doi:10.1002/adma.19930050603 · Cited by 1,445
Designed Hybrid Organic−Inorganic Nanocomposites from Functional Nanobuilding Blocks
Sanchez, C., Soler-Illia, G. J. D. A. A., Ribot, F., Lalot, T., Mayer, C. R., & Cabuil, V. (2001) · Chemistry of Materials · doi:10.1021/cm011061e · Cited by 1,240
Self-citationHybrid organic–inorganic materials: a land of multidisciplinarity
Judeinstein, P., & Sanchez, C. (1996) · J. Mater. Chem. · doi:10.1039/jm9960600511 · Cited by 1,168
Concepts for the incorporation of inorganic building blocks into organic polymers on a nanoscale
Kickelbick, G. (2003) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00019-9 · Cited by 1,159
Bridged Polysilsesquioxanes. Highly Porous Hybrid Organic-Inorganic Materials
Loy, D. A., & Shea, K. J. (1995) · Chemical Reviews · doi:10.1021/cr00037a013 · Cited by 994
Design of hybrid organic-inorganic materials synthesized via sol-gel chemistry
Sánchez, C., & Ribot, F. O. (1994) · HAL · Cited by 984
Hybrid Inorganic-Organic Materials by Sol-Gel Processing of Organofunctional Metal Alkoxides
Schubert, U., Huesing, N., & Lorenz, A. (1995) · Chemistry of Materials · doi:10.1021/cm00059a007 · Cited by 888
Optical Properties of Functional Hybrid Organic–Inorganic Nanocomposites
Sanchez, C., Lebeau, B., Chaput, F., & Boilot, J. ‐. (2003) · Advanced Materials · doi:10.1002/adma.200300389 · Cited by 886
Self-citationChemical modification of alkoxide precursors
Sanchez, C., Livage, J., Henry, M., & Babonneau, F. (1988) · Journal of Non-Crystalline Solids · doi:10.1016/0022-3093(88)90007-5 · Cited by 797
Self-citationTabor, D. (1970) · Reviews of Physics in Technology · doi:10.1088/0034-6683/1/3/i01 · Cited by 636
Hybrid Sol−Gel-Derived Polymers: Applications of Multifunctional Materials
Schottner, G. (2001) · Chemistry of Materials · doi:10.1021/cm011060m · Cited by 635
Mann, S. (2000) · Angewandte Chemie · doi:10.1002/1521-3773(20001002)39:19<3392::aid-anie3392>3.0.co;2-m · Cited by 617
Continuous self-assembly of organic–inorganic nanocomposite coatings that mimic nacre
Sellinger, A., Weiss, P. M., Nguyen, A., Lu, Y., Assink, R. A., Gong, W., & Brinker, C. J. (1998) · Nature · doi:10.1038/28354 · Cited by 579
Bridged Polysilsesquioxanes. Molecular-Engineered Hybrid Organic−Inorganic Materials
Shea, K. J., & Loy, D. A. (2001) · Chemistry of Materials · doi:10.1021/cm011074s · Cited by 552
Recent Developments of Molecular Chemistry for Sol–Gel Processes
Corriu, R. J. P., & Leclercq, D. (1996) · Angewandte Chemie International Edition in English · doi:10.1002/anie.199614201 · Cited by 518
Block copolymer-templated mesoporous oxides
Soler-Illia, G. J. D. A. A., Crepaldi, E. L., Grosso, D., & Sanchez, C. (2003) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(03)00002-5 · Cited by 501
Self-citationLichtenhan, J. D., Otonari, Y. A., & Carr, M. J. (1995) · Macromolecules · doi:10.1021/ma00128a067 · Cited by 465
Huang, H. H., Orler, B., & Wilkes, G. L. (1987) · Macromolecules · doi:10.1021/ma00172a026 · Cited by 455
Hybrid Organic-Inorganic Composites
Mark, J. E., Lee, C. Y.-C., & Bianconi, P. A. (1995) · ACS symposium series · doi:10.1021/bk-1995-0585 · Cited by 439
Polyhedral oligomeric silsesquioxane(POSS)-based polymers
Schwab, J. J., & Lichtenhan, J. D. (1998) · Applied Organometallic Chemistry · doi:10.1002/(sici)1099-0739(199810/11)12:10/11<707::aid-aoc776>3.0.co;2-1 · Cited by 405
Mechanical Relaxation and Microstructure of Poly(norbornyl-POSS) Copolymers
Mather, P. T., Jeon, H. G., Romo-Uribe, A., Haddad, T. S., & Lichtenhan, J. D. (1999) · Macromolecules · doi:10.1021/ma981210n · Cited by 388
Polyimide/POSS nanocomposites: interfacial interaction, thermal properties and mechanical properties
Huang, J.-C., He, C.-B., Xiao, Y., Mya, K. Y., Dai, J., & Siow, Y. P. (2003) · Polymer · doi:10.1016/s0032-3861(03)00434-8 · Cited by 372
Viscoelastic Responses of Polyhedral Oligosilsesquioxane Reinforced Epoxy Systems
Lee, A., & Lichtenhan, J. D. (1998) · Macromolecules · doi:10.1021/ma9800764 · Cited by 361
Hajji, P., David, L., Gerard, J. F., Pascault, J. P., & Vigier, G. (1999) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19991115)37:22<3172::aid-polb2>3.0.co;2-r · Cited by 334
Organic–Inorganic Nanostructured Colloids
Bourgeat-Lami, E. (2002) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2002.075 · Cited by 326
Malzbender, J., den Toonder, J. M. J., Balkenende, A. R., & de With, G. (2002) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(01)00040-7 · Cited by 322
Silsesquioxane-siloxane copolymers from polyhedral silsesquioxanes
Lichtenhan, J. D., Vu, N. Q., Carter, J. A., Gilman, J. W., & Feher, F. J. (1993) · Macromolecules · doi:10.1021/ma00060a053 · Cited by 311
Ni, Y., Zheng, S., & Nie, K. (2004) · Polymer · doi:10.1016/j.polymer.2004.06.008 · Cited by 298
Fu, B. X., Hsiao, B. S., Pagola, S., Stephens, P., White, H., Rafailovich, M., Sokolov, J., Mather, P. T., Jeon, H. G., Phillips, S., et al. (2001) · Polymer · doi:10.1016/s0032-3861(00)00389-x · Cited by 285
Li, G. Z., Wang, L., Toghiani, H., Daulton, T. L., Koyama, K., & Pittman, C. U. (2001) · Macromolecules · doi:10.1021/ma011117q · Cited by 273
Synthesis and Characterization of Surface-Protected Nanocrystalline Titania Particles
Scolan, E., & Sanchez, C. (1998) · Chemistry of Materials · doi:10.1021/cm980322q · Cited by 261
Self-citationRomo‐Uribe, A., Mather, P. T., Haddad, T. S., & Lichtenhan, J. D. (1998) · Journal of Polymer Science Part B Polymer Physics · Cited by 247
Organic/Inorganic Hybrid Epoxy Nanocomposites from Aminophenylsilsesquioxanes
Choi, J., Kim, S. G., & Laine, R. M. (2004) · Macromolecules · doi:10.1021/ma030309d · Cited by 234
Polymers Reinforced by Covalently Bonded Inorganic Clusters
Schubert, U. (2001) · Chemistry of Materials · doi:10.1021/cm001258r · Cited by 222
Transparent silica gel–PMMA composites
Pope, E. J. A., Asami, M., & Mackenzie, J. D. (1989) · Journal of Materials Research · doi:10.1557/jmr.1989.1018 · Cited by 216
Sol−Gel-Processed SiO2/TiO2/Poly(vinylpyrrolidone) Composite Materials for Optical Waveguides
Yoshida, M., & Prasad, P. N. (1996) · Chemistry of Materials · doi:10.1021/cm950331o · Cited by 214
Pyun, J., Matyjaszewski, K., Wu, J., Kim, G.-M., Chun, S. B., & Mather, P. T. (2003) · Polymer · doi:10.1016/s0032-3861(03)00027-2 · Cited by 210
Strachota, A., Kroutilová, I., Kovářová, J., et al. (2004) · Macromolecules · doi:10.1021/ma048448y · Cited by 195
Feature article. Preparation of new polyimide–silica hybrid materials via the sol–gel process
Morikawa, A., Iyoku, Y., Kakimoto, M.-A., & Imai, Y. (1992) · J. Mater. Chem. · doi:10.1039/jm9920200679 · Cited by 189
Ellsworth, M. W., & Novak, B. M. (1991) · Journal of the American Chemical Society · doi:10.1021/ja00007a062 · Cited by 172
New high-refractive-index organic/inorganic hybrid materials from sol-gel processing
Wang, B., Wilkes, G. L., Hedrick, J. C., Liptak, S. C., & McGrath, J. E. (1991) · Macromolecules · doi:10.1021/ma00011a063 · Cited by 171
Novak, B. M., & Davies, C. (1991) · Macromolecules · doi:10.1021/ma00019a044 · Cited by 160
Kim, G. ‐., Qin, H., Fang, X., Sun, F.-C., & Mather, P. T. (2003) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10703 · Cited by 152
Sol-gel derived hybrid inorganic-organic nanocomposites for optics
Lebeau, B., & Sánchez, C. (1999) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(99)80005-9 · Cited by 151
Molecular design of alkoxide precursors for the synthesis of hybrid organic-inorganic gels
Sánchez, C., & In, M. (1992) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(05)80584-8 · Cited by 138
Yuan, Q., & Mark, J. E. (1999) · Macromolecular Chemistry and Physics · Cited by 122
Li, G. Z., Wang, L., Toghiani, H., Daulton, T. L., & Pittman, C. U. J. (2002) · Polymer · doi:10.1016/s0032-3861(02)00232-x · Cited by 120
Mechanical properties of silica–(meth)acrylate hybrid coatings on polycarbonate substrate
Soloukhin, V. A., Posthumus, W., Brokken-Zijp, J. C. M., Loos, J., & de With, G. (2002) · Polymer · doi:10.1016/s0032-3861(02)00542-6 · Cited by 113
Lebeau, B., Brasselet, S., Zyss, J., & Sánchez, C. (1997) · Chemistry of Materials · doi:10.1021/cm960576g · Cited by 113
Organically modified montmorillonites in UV curable urethane acrylate films
Uhl, F. M., Davuluri, S. P., Wong, S., & Webster, D. C. (2004) · Polymer · doi:10.1016/j.polymer.2004.07.001 · Cited by 110
Bonello, B., Perrin, B., Romatet, E., & Jeannet, J. C. (1997) · Ultrasonics · doi:10.1016/s0041-624x(96)00102-3 · Cited by 97
Role of trialkoxysilane functionalization in the preparation of organic-inorganic composites
Coltrain, B. K., Landry, C. J. T., O’Reilly, J. M., Chamberlain, A. M., Rakes, G. A., Sedita, J. S., Kelts, L. W., Landry, M. R., & Long, V. K. (1993) · Chemistry of Materials · doi:10.1021/cm00034a014 · Cited by 94
Coatings for mechanical and chemical protection based on organic-inorganic sol-gel nanocomposites
Schmidt, H. K., & Kasemann, R. (1994) · Publications of the UdS (Saarland University) · doi:10.22028/d291-24466 · Cited by 92
Thermomechanical properties of polyimide-epoxy nanocomposites from cubic silsesquioxane epoxides
Huang, J., Xiao, Y., Mya, K. Y., Liu, X., He, C., Dai, J., & Siow, Y. (2004) · Journal of Materials Chemistry · doi:10.1039/b405427j · Cited by 91
Rhee, S. (2003) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.004 · Cited by 91
Rodrigues, D. E., Brennan, A. B., Betrabet, C. S., Wang, B., & Wilkes, G. L. (1992) · Chemistry of Materials · doi:10.1021/cm00024a055 · Cited by 87
Becker, C., Krug, H., & Schmidt, H. (1996) · MRS Proceedings · doi:10.1557/proc-435-237 · Cited by 86
Elastomeric networks cross-linked by silica or titania fillers
Sur, G. S., & Mark, J. E. (1985) · European Polymer Journal · doi:10.1016/0014-3057(85)90213-7 · Cited by 85
Structure of poly(vinylpyrrolidone)-silica hybrid
Toki, M., Chow, T. Y., Ohnaka, T., Samura, H., & Sàegusa, T. (1992) · Polymer Bulletin · doi:10.1007/bf01041151 · Cited by 85
Physical ageing and glass transition in amorphous polymers as revealed by microhardness
Ania, F., Martínez‐Salazar, J., & Calleja, F. J. B. (1989) · Journal of Materials Science · doi:10.1007/bf02385650 · Cited by 81
Chemists and the school of nature
Bensaude‐Vincent, B., Arribart, H., Bouligand, Y., & Sánchez, C. (2002) · New Journal of Chemistry · doi:10.1039/b108504m · Cited by 79
Kickelbick, G., & Schubert, U. (2001) · Monatshefte für Chemie - Chemical Monthly · doi:10.1007/s007060170141 · Cited by 71
A fast convenient method to prepare hybrid sol-gel materials with low volume-shrinkages
Wei, Y., Jin, D., Yang, C., & Gu, W. (1996) · Journal of Sol-Gel Science and Technology · doi:10.1007/bf00401037 · Cited by 68
Kuentz, M., & Leuenberger, H. (2000) · Powder Technology · doi:10.1016/s0032-5910(00)00250-3 · Cited by 67
Trimmel, G., Fratzl, P., & Schubert, U. (2000) · Chemistry of Materials · doi:10.1021/cm991174m · Cited by 64
New Photochromic Hybrid Organic–Inorganic Materials Built from Well-Defined Nano-Building Blocks
Ribot, F. O., Lafuma, A., Eychenne‐Baron, C., & Sánchez, C. (2002) · Advanced Materials · Cited by 63
Guido, K., & Ulrich, S. (2001) · Springer eBooks · doi:10.1007/978-3-7091-6276-7_2 · Cited by 52
Schubert, U., Völkel, T., & Moszner, N. (2001) · Chemistry of Materials · doi:10.1021/cm0111128 · Cited by 51
Ribot, F. O., Banse, F., Diter, F., & Sánchez, C. (1995) · HAL · Cited by 46
Kickelbick, G., Feth, M. P., Bertagnolli, H., Puchberger, M., Holzinger, D., & Gross, S. (2002) · Journal of the Chemical Society Dalton Transactions · doi:10.1039/b207994a · Cited by 42
Metal oxoalkoxides. Synthesis, properties and structures
Turova, N. Y. (2004) · Russian Chemical Reviews · doi:10.1070/rc2004v073n11abeh000855 · Cited by 42
Kweon, J., & Noh, S. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1689 · Cited by 35
Sánchez, C., In, M., Tolédano, P., & Griesmar, P. (1992) · MRS Proceedings · doi:10.1557/proc-271-669 · Cited by 29
Messori, M., Toselli, M., Pilati, F., Fabbri, E., Fabbri, P., & Busoli, S. (2003) · Surface Coatings International Part B Coatings Transactions · doi:10.1007/bf02699651 · Cited by 25
Kweon, J., & Noh, S. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12777 · Cited by 9
Cited by
Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications
Zou, H., Wu, S., & Shen, J. (2008) · Chemical Reviews · doi:10.1021/cr068035q · Cited by 2,121
Applications of advanced hybrid organic–inorganic nanomaterials: from laboratory to market
Sanchez, C., Belleville, P., Popall, M., & Nicole, L. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00136h · Cited by 1,462
Self-citationLow Dielectric Constant Materials
Volksen, W., Miller, R. D., & Dubois, G. (2010) · Chemical Reviews · doi:10.1021/cr9002819 · Cited by 964
Photochromic organic–inorganic hybrid materials
Pardo, R., Zayat, M., & Levy, D. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00065e · Cited by 704
Sol–gel silica-based biomaterials and bone tissue regeneration
Arcos, D., & Vallet-Regí, M. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.012 · Cited by 579
Metadata
- Authors
- Mammeri, F., Bourhis, E. L., Rozes, L., & Sanchez, C.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2005
- Volume
- 15
- Issue
- 35-36
- Pages
- 3787
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W1985691624
- Cited by
- 512
- References
- 81
- FWCI
- 17.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.