The DOI matches its Crossref record.
Highly dispersed ruthenium oxide nanoparticles on carboxylated carbon nanotubes for supercapacitor electrode materials
Abstract
To enhance its pseudocapacitance, ruthenium oxide must be formed with a hydrated amorphous and porous structure and a small size, because this structure provides a large surface area and forms conduction paths for protons to easily access even the inner part of the RuO2. In this study, we report that highly dispersed RuO2 nanoparticles could be obtained on carboxylated carbon nanotubes. This could be achieved by preventing agglomeration among RuO2 nanoparticles by bond formation between the RuO2 and the surface carboxyl groups of the carbon nanotubes. Highly dispersed RuO2 nanoparticles on carbon nanotubes showed an increased capacitance, which can be explained by the fact that with the decrease in size protons were able to access the inner part of RuO2, so that its utilization was increased. The high dispersion of RuO2 is therefore a key factor to increase the capacitance of nanocomposite electrode materials for supercapacitors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of electrode materials for electrochemical supercapacitors
Wang, G., Zhang, L., & Zhang, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15060j · Cited by 9,152
Carbon materials for chemical capacitive energy storage
Zhai, Y., Dou, Y., Zhao, D., Fulvio, P. F., Mayes, R. T., & Dai, S. (2011) · Advanced Materials · doi:10.1002/adma.201100984 · Cited by 2,964
Review on supercapacitors: Technologies and materials
González, A., Goikolea, E., Barrena, J. A., & Mysyk, R. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.249 · Cited by 2,960
Yan, J., Wang, Q., Wei, T., & Fan, Z. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300816 · Cited by 2,232
3D carbon based nanostructures for advanced supercapacitors
Jiang, H., Lee, P. S., & Li, C. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23284g · Cited by 1,511
Anchoring Hydrous RuO2 on Graphene Sheets for High‐Performance Electrochemical Capacitors
Wu, Z., Wang, D., Ren, W., Zhao, J., Zhou, G., Li, F., & Cheng, H. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001054 · Cited by 1,209
Carbon Nanotube−Inorganic Hybrids
Eder, D. (2010) · Chemical Reviews · doi:10.1021/cr800433k · Cited by 819
Carbon nanomaterials for high-performance supercapacitors
Chen, T., & Dai, L. (2013) · Materials Today · doi:10.1016/j.mattod.2013.07.002 · Cited by 736
Simple Capacitors to Supercapacitors - An Overview
Jayalakshmi, M., & Balasubramanian, K. (2008) · International Journal of Electrochemical Science · doi:10.1016/s1452-3981(23)15517-9 · Cited by 617
Electrode materials for aqueous asymmetric supercapacitors
Wang, F., Xiao, S., Hou, Y., Hu, C., Liu, L., & Wu, Y. (2013) · RSC Advances · doi:10.1039/c3ra23466e · Cited by 547
Materials Design and System Construction for Conventional and New‐Concept Supercapacitors
Wu, Z., Li, L., Yan, J., & Zhang, X. (2017) · Advanced Science · doi:10.1002/advs.201600382 · Cited by 470
Obreja, V. V. N. (2008) · Physica E: Low-dimensional Systems and Nanostructures · doi:10.1016/j.physe.2007.09.044 · Cited by 463
Zhu, Y., Ji, X., Pan, C., Sun, Q., Song, W., Fang, L., Chen, Q., & Banks, C. E. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41776j · Cited by 343
Application and Future Challenges of Functional Nanocarbon Hybrids
Shearer, C. J., Cherevan, A., & Eder, D. (2014) · Advanced Materials · doi:10.1002/adma.201305254 · Cited by 339
Diffuse charge and Faradaic reactions in porous electrodes
Biesheuvel, P. M., Fu, Y., & Bazant, M. Z. (2011) · Physical Review E · doi:10.1103/physreve.83.061507 · Cited by 293
Yuan, C. Z., Gao, B., Shen, L. F., Yang, S. D., Hao, L., Lu, X. J., Zhang, F., Zhang, L. J., & Zhang, X. G. (2011) · Nanoscale · doi:10.1039/c0nr00423e · Cited by 288
Metadata
- Authors
- Kim, Y.-T., Tadai, K., & Mitani, T.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2005
- Volume
- 15
- Issue
- 46
- Pages
- 4914
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2039388213
- Cited by
- 180
- References
- 0
- FWCI
- 2.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.