The DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.
Manipulating regioregular poly(3-hexylthiophene) : [6,6]-phenyl-C61-butyric acid methyl ester blends—route towards high efficiency polymer solar cells
Abstract
Polymer or “plastics” solar cells have been an intensively studied area since the discovery of efficient electron transfer between polymers and fullerenes and the introduction of the bulk-heterojunction concept. The last few years have seen significant improvement in plastic solar cell performance through aggressive research on the regioregular poly(3-hexylthiophene) (RR-P3HT) : [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) system. The morphology of the system is controlled through two major strategies which have proven effective in improving the device efficiency—thermal annealing and solvent annealing (slow growth). In this Feature Article, we review the recent progress on this material system. A detailed discussion on thermal annealing and solvent annealing approaches to improve device performance is presented, including a comparison between the two strategies. The effects of these two approaches on improving polymer crystallinity, light absorption in the polymer, carrier transport, blend film nano-morphology, etc. are summarized. We also include a brief discussion on accurate measurement and characterization techniques for polymer solar cells to correctly determine the efficiency by applying spectral mismatch factors. Future directions and challenges on polymer solar cell development are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organic electroluminescent diodes
Tang, C. W., & VanSlyke, S. A. (1987) · Applied Physics Letters · doi:10.1063/1.98799 · Cited by 14,363
Light-emitting diodes based on conjugated polymers
Burroughes, J. H., Bradley, D. D. C., Brown, A. R., Marks, R. N., Mackay, K., Friend, R. H., Burns, P. L., & Holmes, A. B. (1990) · Nature · doi:10.1038/347539a0 · Cited by 11,393
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Su, W. P., Schrieffer, J. R., & Heeger, A. J. (1979) · Physical Review Letters · doi:10.1103/physrevlett.42.1698 · Cited by 6,783
Electroluminescence in conjugated polymers
Friend, R. H., Gymer, R. W., Holmes, A. B., Burroughes, J. H., Marks, R. N., Taliani, C., Bradley, D. D. C., Santos, D. A. D., Brédas, J. L., Lögdlund, M., et al. (1999) · Nature · doi:10.1038/16393 · Cited by 5,977
Li, G., Shrotriya, V., Huang, J., Yao, Y., Moriarty, T., Emery, K., & Yang, Y. (2005) · Nature Materials · doi:10.1038/nmat1500 · Cited by 5,535
Self-citationDesign Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency
Scharber, M. C., Mühlbacher, D., Koppe, M., Denk, P., Waldauf, C., Heeger, A. J., & Brabec, C. J. (2006) · Advanced Materials · doi:10.1002/adma.200501717 · Cited by 5,205
Two-dimensional charge transport in self-organized, high-mobility conjugated polymers
Sirringhaus, H., Brown, P. J., Friend, R. H., Nielsen, M. M., Bechgaard, K., Langeveld-Voss, B. M. W., Spiering, A. J. H., Janssen, R. A. J., Meijer, E. W., Herwig, P., et al. (1999) · Nature · doi:10.1038/44359 · Cited by 4,624
Ma, W., Yang, C., Gong, X., Lee, K., & Heeger, A. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200500211 · Cited by 4,565
Photoinduced Electron Transfer from a Conducting Polymer to Buckminsterfullerene
Sariciftci, N. S., Smilowitz, L., Heeger, A. J., & Wudl, F. (1992) · Science · doi:10.1126/science.258.5087.1474 · Cited by 4,273
Cited by
Liang, Y., Xu, Z., Xia, J., Tsai, S., Wu, Y., Li, G., Ray, C., & Yu, L. (2010) · Advanced Materials · doi:10.1002/adma.200903528 · Cited by 3,649
Self-citationPolymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
Self-citationChen, L., Hong, Z., Li, G., & Yang, Y. (2009) · Advanced Materials · doi:10.1002/adma.200802854 · Cited by 1,267
Self-citationWienk, M. M., Turbiez, M., Gilot, J., & Janssen, R. A. J. (2008) · Advanced Materials · doi:10.1002/adma.200800456 · Cited by 695
Xu, Z., Chen, L., Yang, G., Huang, C., Hou, J., Wu, Y., Li, G., Hsu, C., & Yang, Y. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801286 · Cited by 681
Self-citationDang, M. T., Hirsch, L., Wantz, G., & Wuest, J. D. (2013) · Chemical Reviews · doi:10.1021/cr300005u · Cited by 587
Carbazole-based polymers for organic photovoltaic devices
Li, J., & Grimsdale, A. C. (2010) · Chemical Society Reviews · doi:10.1039/b915995a · Cited by 482
Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer
Liao, H.-H., Chen, L.-M., Xu, Z., Li, G., & Yang, Y. (2008) · Applied Physics Letters · doi:10.1063/1.2918983 · Cited by 473
Self-citationWong, W.-Y., & Ho, C.-L. (2010) · Accounts of Chemical Research · doi:10.1021/ar1000378 · Cited by 460
The Role of Processing in the Fabrication and Optimization of Plastic Solar Cells
Peet, J., Senatore, M. L., Heeger, A. J., & Bazan, G. C. (2009) · Advanced Materials · doi:10.1002/adma.200802559 · Cited by 391
Yin, Z., & Zheng, Q. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100560 · Cited by 374
Kim, G.-W., Kang, G., Kim, J., Lee, G.-Y., Kim, H. I., Pyeon, L., Lee, J., & Park, T. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00709k · Cited by 354
Ayzner, A. L., Tassone, C. J., Tolbert, S. H., & Schwartz, B. J. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp9050897 · Cited by 348
Chochos, C. L., & Choulis, S. A. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.04.003 · Cited by 340
Yin, W., & Dadmun, M. (2011) · ACS Nano · doi:10.1021/nn200744q · Cited by 314
Conjugated polymer–inorganic semiconductor hybrid solar cells
Xu, T., & Qiao, Q. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00632g · Cited by 284
Polymer Crystallization of Partially Miscible Polythiophene/Fullerene Mixtures Controls Morphology
Kozub, D. R., Vakhshouri, K., Orme, L. M., Wang, C., Hexemer, A., & Gomez, E. D. (2011) · Macromolecules · doi:10.1021/ma200855r · Cited by 272
Molecular Order in High-Efficiency Polymer/Fullerene Bulk Heterojunction Solar Cells
Hammond, M. R., Kline, R. J., Herzing, A. A., Richter, L. J., Germack, D. S., Ro, H.-W., Soles, C. L., Fischer, D. A., Xu, T., Yu, L., et al. (2011) · ACS Nano · doi:10.1021/nn202951e · Cited by 268
Recent trends in polymer tandem solar cells research
You, J., Dou, L., Hong, Z., Li, G., & Yang, Y. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.04.005 · Cited by 267
Self-citationMorphology Control in Solution‐Processed Bulk‐Heterojunction Solar Cell Mixtures
Moulé, A. J., & Meerholz, K. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900775 · Cited by 263
Nanostructured conducting polymers for energy applications: towards a sustainable platform
Ghosh, S., Maiyalagan, T., & Basu, R. N. (2016) · Nanoscale · doi:10.1039/c5nr08803h · Cited by 262
Metadata
- Authors
- Li, G., Shrotriya, V., Yao, Y., Huang, J., & Yang, Y.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2007
- Volume
- 17
- Issue
- 30
- Pages
- 3126
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2159692941
- Cited by
- 377
- References
- 69
- FWCI
- 29.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.