The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Inkjet-printed silver tracks: low temperature curing and thermal stability investigation
Abstract
In this contribution the curing behavior and conductivity development of several commercially available silver inks is discussed. In addition, the preparation and characterization of a silver particle ink that shows a curing temperature as low as 80 °C is described. Good to excellent conductivity values of 5 to 56% of bulk silver have been reached by using a very small amount of organic additives without any strong adsorbing groups such as amines, amides or mercapto groups. This low curing temperature opens new routes to produce conductive features on polymeric foils that have a low Tg, like PET. Furthermore, the temperature stability of silver tracks, prepared by inkjet printing different colloidal silver suspensions, was investigated. Hereto, the resistance was on-line measured during heating of the silver tracks, from room temperature to 650 °C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Size effect on the melting temperature of gold particles
Buffat, P., & Borel, J.-P. (1976) · Physical Review A · doi:10.1103/physreva.13.2287 · Cited by 3,362
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Self-citationMicro- and Nanopatterning Techniques for Organic Electronic and Optoelectronic Systems
Menard, E., Meitl, M. A., Sun, Y., Park, J.-U., Shir, D. J.-L., Nam, Y.-S., Jeon, S., & Rogers, J. A. (2007) · Chemical Reviews · doi:10.1021/cr050139y · Cited by 658
Ink-jet printed nanoparticle microelectromechanical systems
Fuller, S. B., Wilhelm, E. J., & Jacobson, J. M. (2002) · Journal of Microelectromechanical Systems · doi:10.1109/84.982863 · Cited by 594
Inkjet printing of nanosized silver colloids
Lee, H.-H., Chou, K.-S., & Huang, K.-C. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/10/074 · Cited by 586
Plastic-Compatible Low Resistance Printable Gold Nanoparticle Conductors for Flexible Electronics
Huang, D., Liao, F., Molesa, S., Redinger, D., & Subramanian, V. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1582466 · Cited by 524
Small‐scale free surface flows with breakup: Drop formation and emerging applications
Basaran, O. A. (2002) · AIChE Journal · doi:10.1002/aic.690480902 · Cited by 478
Thermal behavior of silver nanoparticles for low-temperature interconnect applications
Moon, K.-S., Dong, H., Maric, R., Pothukuchi, S., Hunt, A., Li, Y., & Wong, C. P. (2005) · Journal of Electronic Materials · doi:10.1007/s11664-005-0229-8 · Cited by 385
Kim, D., Jeong, S., Park, B. K., & Moon, J. (2006) · Applied Physics Letters · doi:10.1063/1.2424671 · Cited by 331
Cheng, K., Yang, M., Chiu, W. W. W., Huang, C., Chang, J., Ying, T., & Yang, Y. (2005) · Macromolecular Rapid Communications · doi:10.1002/marc.200400462 · Cited by 184
Desktop inkjet printer as a tool to print conducting polymers
Yoshioka, Y., & Jabbour, G. E. (2006) · Synthetic Metals · doi:10.1016/j.synthmet.2006.03.013 · Cited by 159
Chou, K., Huang, K., & Lee, H.-H. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/6/027 · Cited by 157
Geometric control of inkjet printed features using a gelating polymer
van den Berg, A. M. J., de Laat, A. W. M., Smith, P. J., Perelaer, J., & Schubert, U. S. (2006) · Journal of Materials Chemistry · doi:10.1039/b612158f · Cited by 120
Self-citationDevelopment of Electrical Conduction in Silver-filled Epoxy Adhesives
Lovinger, A. J. (1979) · The Journal of Adhesion · doi:10.1080/00218467908544607 · Cited by 103
Direct Laser Patterning of Conductive Wires on Three-Dimensional Polymeric Microstructures
LaFratta, C. N., Lim, D., O’Malley, K. M., Baldacchini, T., & Fourkas, J. T. (2006) · Chemistry of Materials · doi:10.1021/cm0525306 · Cited by 62
Yarin, A. L., Szczech, J., Megaridis, C. M., et al. (2005) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2005.07.032 · Cited by 41
Cited by
Conductive Nanomaterials for Printed Electronics
Kamyshny, A., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 911
Perelaer, J., Smith, P. J., Mager, D., Soltman, D., Volkman, S. K., Subramanian, V., Korvink, J. G., & Schubert, U. S. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00264j · Cited by 736
Self-citationPrintable Transparent Conductive Films for Flexible Electronics
Li, D., Lai, W., Zhang, Y., & Huang, W. (2018) · Advanced Materials · doi:10.1002/adma.201704738 · Cited by 714
Conductive nanomaterials for 2D and 3D printed flexible electronics
Kamyshny, A., & Magdassi, S. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00738a · Cited by 469
Low-Cost Inorganic Solar Cells: From Ink To Printed Device
Habas, S. E., Platt, H. A. S., van Hest, M. F. A. M., & Ginley, D. S. (2010) · Chemical Reviews · doi:10.1021/cr100191d · Cited by 459
Metadata
- Authors
- Perelaer, B. J., de Laat, A. W. M., Hendriks, C. E., & Schubert, U. S.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2008
- Volume
- 18
- Issue
- 27
- Pages
- 3209
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2152516856
- Cited by
- 308
- References
- 16
- FWCI
- 15.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.