The DOI matches its Crossref record.
(La0.75Sr0.25)0.95Mn0.5Cr0.5O3 as the cathode of solid oxide electrolysis cells for high temperature hydrogen production from steam
Abstract
Ni/YSZ cathodes are generally utilised for steam electrolysis; however such electrodes can only operate under reducing conditions. In an atmosphere with low content of H2 or without H2, especially under low current conditions, cathodes based on (La0.75Sr0.25)0.95Mn0.5Cr0.5O3 (LSCM) provide a promising alternative. Solid Oxide Electrolysis Cells with LSCM cathodes were tested under external potential load at temperatures between 750 °C and 1000 °C using 3% steam/Ar/4% H2 and 3% steam/Ar, and promising polarisation impedance data were obtained in both atmospheres, especially in the gas without H2. I–V curves from LSCM cells in 3% steam/Ar have sigmoidal shape indicative of chemical changes in the LSCM occurring in addition to electrolysis. Despite these features, considerably improved performance is found compared to Ni-based electrodes in low hydrogen conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Recent advances in high temperature electrolysis using solid oxide fuel cells: A review
Laguna-Bercero, M. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.12.019 · Cited by 1,156
Sustainable hydrocarbon fuels by recycling CO 2 and H 2 O with renewable or nuclear energy
Graves, C., Ebbesen, S. D., Mogensen, M., & Lackner, K. S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.07.014 · Cited by 1,056
The intensification technologies to water electrolysis for hydrogen production – A review
Wang, M., Wang, Z., Gong, X., & Guo, Z. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.08.090 · Cited by 1,011
Zheng, Y., Wang, J., Yu, B., Zhang, W., Chen, J., Qiao, J., & Zhang, J. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00403b · Cited by 782
Electrocatalysts for the generation of hydrogen, oxygen and synthesis gas
Sapountzi, F. M., Gracia, J. M., Weststrate, C. J. (.-J., Fredriksson, H. O. A., & Niemantsverdriet, J. W. (. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2016.09.001 · Cited by 765
Ebbesen, S. D., Jensen, S. H., Hauch, A., & Mogensen, M. B. (2014) · Chemical Reviews · doi:10.1021/cr5000865 · Cited by 636
Steam electrolysis by solid oxide electrolysis cells (SOECs) with proton-conducting oxides
Bi, L., Boulfrad, S., & Traversa, E. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00194j · Cited by 464
Water Electrolysis toward Elevated Temperature: Advances, Challenges and Frontiers
Zhang, W., Liu, M., Gu, X., Shi, Y., Deng, Z., & Cai, N. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00573 · Cited by 441
Tsekouras, G., Neagu, D., & Irvine, J. T. S. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee22547f · Cited by 351
Self-citationRenewable electricity storage using electrolysis
Yan, Z., Hitt, J. L., Turner, J. A., & Mallouk, T. E. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1821686116 · Cited by 248
Metadata
- Authors
- Yang, X., & Irvine, J. T. S.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2008
- Volume
- 18
- Issue
- 20
- Pages
- 2349
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2084437581
- Cited by
- 176
- References
- 0
- FWCI
- 3.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.