Elastic low density aerogels derived from bis[3-(triethoxysilyl)propyl]disulfide, tetramethylorthosilicate and vinyltrimethoxysilane via a two-step process
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
A series of low density, porous structures were prepared using bis[3-(triethoxysilyl)propyl]disulfide (BTSPD), tetramethylorthosilicate (TMOS) and vinyltrimethoxysilane (VTMS) as precursors via a two-step (acid–base) sol-gel process followed by supercritical CO2 extraction. Using statistical experimental design methodology and empirical modelling, the concentrations of BTSPD, TMOS and VTMS were varied in the production of the monoliths and found to have a significant effect on their bulk density, porosity, BET surface areas, hydrophobicity and mechanical properties. Increasing the TMOS concentration significantly increases the surface area and Young's modulus while higher VTMS concentration improves hydrophobicity and higher BTSPD concentration leads to increased elastic recovery after compression. Optimized aerogels produced in the study have a combination of high Young's modulus, good hydrophobicity and near complete recovery after compression in agreement with model predictions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemistry of Aerogels and Their Applications
Pierre, A. C., & Pajonk, G. M. (2002) · Chemical Reviews · doi:10.1021/cr0101306 · Cited by 2,239
Cited by
An Overview on Silica Aerogels Synthesis and Different Mechanical Reinforcing Strategies
Maleki, H., Durães, L., & Portugal, A. (2014) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2013.10.017 · Cited by 740
“The density and then mechanical properties can be well controlled by varying several factors, such as silicon molar concentration in the sol [21,23,29,48,49,138,167], the organic monomer concentration [23,48,49,51,138,163], the gelation solvents [138,167] and so on.”
BackgroundTailoring Mechanical Properties of Aerogels for Aerospace Applications
Randall, J. P., Meador, M. A. B., & Jana, S. C. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200007n · Cited by 579
Self-citationSynthesis and biomedical applications of aerogels: Possibilities and challenges
Maleki, H., Durães, L., García-González, C. A., del Gaudio, P., Portugal, A., & Mahmoudi, M. (2016) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2016.05.011 · Cited by 386
Polyvinyl Alcohol-Cellulose Nanofibrils-Graphene Oxide Hybrid Organic Aerogels
Javadi, A., Zheng, Q., Payen, F., Javadi, A., Altin, Y., Cai, Z., Sabo, R., & Gong, S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400171y · Cited by 193
Flexible and Transparent Silica Aerogels: An Overview
Parale, V. G., Lee, K.-Y., & Park, H.-H. (2017) · Journal of the Korean Ceramic Society · doi:10.4191/kcers.2017.54.3.12 · Cited by 113
Metadata
- Authors
- Guo, H., Nguyen, B. N., McCorkle, L. S., Shonkwiler, B., & Meador, M. A. B.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2009
- Volume
- 19
- Issue
- 47
- Pages
- 9054
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2070573826
- Cited by
- 63
- References
- 1
- FWCI
- 1.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.