The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Upscaling of polymer solar cell fabrication using full roll-to-roll processing
Abstract
Upscaling of the manufacture of polymer solar cells is detailed with emphasis on cost analysis and practical approach. The device modules were prepared using both slot-die coating and screen printing the active layers in the form of stripes that were serially connected. The stripe width was varied and the resultant performance analysed. Wider stripes give access to higher geometric fill factors and lower aperture loss while they also present larger sheet resistive losses. An optimum was found through preparation of serially connected stripes having widths of 9, 13 and 18 mm with nominal geometric fill factors (excluding bus bars) of 50, 67 and 75% respectively. In addition modules with lengths of 6, 10, 20, 22.5 and 25 cm were explored. The devices were prepared by full roll-to-roll solution processing in a web width of 305 mm and roll lengths of up to 200 m. The devices were encapsulated with a barrier material in a full roll-to-roll process using standard adhesives giving the devices excellent stability during storage and operation. The total area of processed polymer solar cell was around 60 m2 per run. The solar cells were characterised using a roll-to-roll system comprising a solar simulator and an IV-curve tracer. After characterisation the solar cell modules were cut into sheets using a sheeting machine and contacted using button contacts applied by crimping. Based on this a detailed cost analysis was made showing that it is possible to prepare complete and contacted polymer solar cell modules on this scale at an area cost of 89 euro m(-2) and an electricity cost of 8.1 euro Wp(-1). The cost analysis was separated into the manufacturing cost, materials cost and also the capital investment required for setting up a complete production plant on this scale. Even though the cost in euro Wp(-1) is comparable to the cost for electricity using existing technologies the levelized cost of electricity (LCOE) is expected to be significantly higher than the existing technologies due to the inferior operational lifetime. The presented devices are thus competitive for consumer electronics but ill-suited for on-grid electricity production in their current form.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
Park, S. H., Roy, A., Beaupré, S., Cho, S., Coates, N., Moon, J. S., Moses, D., Leclerc, M., Lee, K., & Heeger, A. J. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.69 · Cited by 4,073
Efficient Tandem Polymer Solar Cells Fabricated by All-Solution Processing
Kim, J. Y., Lee, K., Coates, N. E., Moses, D., Nguyen, T.-Q., Dante, M., & Heeger, A. J. (2007) · Science · doi:10.1126/science.1141711 · Cited by 3,270
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Self-citationPolymer‐Fullerene Bulk‐Heterojunction Solar Cells
Dennler, G., Scharber, M. C., & Brabec, C. J. (2009) · Advanced Materials · doi:10.1002/adma.200801283 · Cited by 3,114
Polymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
Polymer–Fullerene Bulk‐Heterojunction Solar Cells
Brabec, C. J., Gowrisanker, S., Halls, J. J. M., Laird, D., Jia, S., & Williams, S. P. (2010) · Advanced Materials · doi:10.1002/adma.200903697 · Cited by 2,621
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
Self-citationSolution-Processed Metal Nanowire Mesh Transparent Electrodes
Lee, J.-Y., Connor, S. T., Cui, Y., & Peumans, P. (2008) · Nano Letters · doi:10.1021/nl073296g · Cited by 1,857
Low band gap polymers for organic photovoltaics
BUNDGAARD, E., & KREBS, F. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2007.01.015 · Cited by 1,346
Self-citationKrebs, F. C., Gevorgyan, S. A., & Alstrup, J. (2009) · Journal of Materials Chemistry · doi:10.1039/b823001c · Cited by 1,229
Self-citationHybrid Zinc Oxide Conjugated Polymer Bulk Heterojunction Solar Cells
Beek, W. J. E., Wienk, M. M., Kemerink, M., Yang, X., & Janssen, R. A. J. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp050745x · Cited by 910
Krebs, F. C., Jørgensen, M., Norrman, K., Hagemann, O., Alstrup, J., Nielsen, T. D., Fyenbo, J., Larsen, K., & Kristensen, J. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.001 · Cited by 808
Self-citationKrebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.012 · Cited by 780
Self-citationAdvanced materials and processes for polymer solar cell devices
Helgesen, M., Søndergaard, R., & Krebs, F. C. (2010) · J. Mater. Chem. · doi:10.1039/b913168j · Cited by 767
Self-citationOrganic tandem solar cells: A review
Ameri, T., Dennler, G., Lungenschmied, C., & Brabec, C. J. (2009) · Energy & Environmental Science · doi:10.1039/b817952b · Cited by 763
Krebs, F. C. (2009) · Organic Electronics · doi:10.1016/j.orgel.2009.03.009 · Cited by 608
Self-citationHybrid photovoltaic devices of polymer and ZnO nanofiber composites
Olson, D. C., Piris, J., Collins, R. T., Shaheen, S. E., & Ginley, D. S. (2006) · Thin Solid Films · doi:10.1016/j.tsf.2005.08.179 · Cited by 514
Krebs, F. C., Nielsen, T. D., Fyenbo, J., Wadstrøm, M., & Pedersen, M. S. (2010) · Energy & Environmental Science · doi:10.1039/b918441d · Cited by 483
Self-citationAnalysis of the failure mechanism for a stable organic photovoltaic during 10 000 h of testing
Krebs, F. C., & Norrman, K. (2007) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.794 · Cited by 420
Self-citationEstimating the manufacturing cost of purely organic solar cells
Kalowekamo, J., & Baker, E. (2009) · Solar Energy · doi:10.1016/j.solener.2009.02.003 · Cited by 384
Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime
Hauch, J. A., Schilinsky, P., Choulis, S. A., Childers, R., Biele, M., & Brabec, C. J. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.004 · Cited by 373
Role of tungsten oxide in inverted polymer solar cells
Tao, C., Ruan, S., Xie, G., Kong, X., Shen, L., Meng, F., Liu, C., Zhang, X., Dong, W., & Chen, W. (2009) · Applied Physics Letters · doi:10.1063/1.3076134 · Cited by 315
Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.04.020 · Cited by 312
Self-citationAir stable polymer photovoltaics based on a process free from vacuum steps and fullerenes
Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.013 · Cited by 303
Self-citationWater-Induced Degradation of Polymer Solar Cells Studied by H218O Labeling
Norrman, K., Gevorgyan, S. A., & Krebs, F. C. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am800039w · Cited by 281
Self-citationPrintable anodes for flexible organic solar cell modules
Aernouts, T., Vanlaeke, P., Geens, W., Poortmans, J., Heremans, P., Borghs, S., Mertens, R., Andriessen, R., & Leenders, L. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2003.11.038 · Cited by 248
A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules
Krebs, F. C., Gevorgyan, S. A., Gholamkhass, B., Holdcroft, S., Schlenker, C., Thompson, M. E., Thompson, B. C., Olson, D., Ginley, D. S., Shaheen, S. E., et al. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.07.015 · Cited by 212
Self-citationLongterm stability of efficient inverted P3HT:PCBM solar cells
Zimmermann, B., Würfel, U., & Niggemann, M. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.022 · Cited by 208
Huang, J.-S., Chou, C.-Y., Liu, M.-Y., Tsai, K.-H., Lin, W.-H., & Lin, C.-F. (2009) · Organic Electronics · doi:10.1016/j.orgel.2009.05.017 · Cited by 163
A simple nanostructured polymer/ZnO hybrid solar cell—preparation and operation in air
Krebs, F. C., Thomann, Y., Thomann, R., & Andreasen, J. W. (2008) · Nanotechnology · doi:10.1088/0957-4484/19/42/424013 · Cited by 157
Self-citationElectronic memory effects in diodes from a zinc oxide nanoparticle-polystyrene hybrid material
Verbakel, F., Meskers, S. C. J., & Janssen, R. A. J. (2006) · Applied Physics Letters · doi:10.1063/1.2345612 · Cited by 156
Zimmermann, B., Glatthaar, M., Niggemann, M., Riede, M., Hinsch, A., & Gombert, A. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.10.005 · Cited by 130
Biodegradable polymer solar cells
Strange, M., Plackett, D., Kaasgaard, M., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.02.002 · Cited by 98
Self-citationAll solution processed tandem polymer solar cells based on thermocleavable materials☆
Hagemann, O., Bjerring, M., Nielsen, N. C., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.05.005 · Cited by 94
Self-citationA model to determine financial indicators for organic solar cells
Powell, C., Bender, T. P., & Lawryshyn, Y. (2009) · Solar Energy · doi:10.1016/j.solener.2009.07.009 · Cited by 40
Cited by
He, Z., Zhong, C., Huang, X., Wong, W., Wu, H., Chen, L., Su, S., & Cao, Y. (2011) · Advanced Materials · doi:10.1002/adma.201103006 · Cited by 2,134
Docampo, P., Ball, J. M., Darwich, M., Eperon, G. E., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3761 · Cited by 1,703
Rational Design of High Performance Conjugated Polymers for Organic Solar Cells
Zhou, H., Yang, L., & You, W. (2012) · Macromolecules · doi:10.1021/ma201648t · Cited by 1,501
Roll-to-roll fabrication of polymer solar cells
Søndergaard, R., Hösel, M., Angmo, D., Larsen-Olsen, T. T., & Krebs, F. C. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70019-6 · Cited by 1,450
Self-citationStability of Polymer Solar Cells
Jørgensen, M., Norrman, K., Gevorgyan, S. A., Tromholt, T., Andreasen, B., & Krebs, F. C. (2012) · Advanced Materials · doi:10.1002/adma.201104187 · Cited by 1,366
Self-citation
Metadata
- Authors
- Krebs, F. C., Tromholt, T., & Jørgensen, M.
- Venue
- Nanoscale
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 2
- Issue
- 6
- Pages
- 873
- ISSN
- 2040-3364 (ISSN-L)
- 2040-3372
- OpenAlex
- W2123664627
- Cited by
- 1,024
- References
- 37
- FWCI
- 111.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.