The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Upscaling of polymer solar cell fabrication using full roll-to-roll processing
Abstract
Upscaling of the manufacture of polymer solar cells is detailed with emphasis on cost analysis and practical approach. The device modules were prepared using both slot-die coating and screen printing the active layers in the form of stripes that were serially connected. The stripe width was varied and the resultant performance analysed. Wider stripes give access to higher geometric fill factors and lower aperture loss while they also present larger sheet resistive losses. An optimum was found through preparation of serially connected stripes having widths of 9, 13 and 18 mm with nominal geometric fill factors (excluding bus bars) of 50, 67 and 75% respectively. In addition modules with lengths of 6, 10, 20, 22.5 and 25 cm were explored. The devices were prepared by full roll-to-roll solution processing in a web width of 305 mm and roll lengths of up to 200 m. The devices were encapsulated with a barrier material in a full roll-to-roll process using standard adhesives giving the devices excellent stability during storage and operation. The total area of processed polymer solar cell was around 60 m2 per run. The solar cells were characterised using a roll-to-roll system comprising a solar simulator and an IV-curve tracer. After characterisation the solar cell modules were cut into sheets using a sheeting machine and contacted using button contacts applied by crimping. Based on this a detailed cost analysis was made showing that it is possible to prepare complete and contacted polymer solar cell modules on this scale at an area cost of 89 euro m(-2) and an electricity cost of 8.1 euro Wp(-1). The cost analysis was separated into the manufacturing cost, materials cost and also the capital investment required for setting up a complete production plant on this scale. Even though the cost in euro Wp(-1) is comparable to the cost for electricity using existing technologies the levelized cost of electricity (LCOE) is expected to be significantly higher than the existing technologies due to the inferior operational lifetime. The presented devices are thus competitive for consumer electronics but ill-suited for on-grid electricity production in their current form.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
Park, S. H., Roy, A., Beaupré, S., Cho, S., Coates, N., Moon, J. S., Moses, D., Leclerc, M., Lee, K., & Heeger, A. J. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.69 · Cited by 4,073
Efficient Tandem Polymer Solar Cells Fabricated by All-Solution Processing
Kim, J. Y., Lee, K., Coates, N. E., Moses, D., Nguyen, T.-Q., Dante, M., & Heeger, A. J. (2007) · Science · doi:10.1126/science.1141711 · Cited by 3,270
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Self-citationPolymer‐Fullerene Bulk‐Heterojunction Solar Cells
Dennler, G., Scharber, M. C., & Brabec, C. J. (2009) · Advanced Materials · doi:10.1002/adma.200801283 · Cited by 3,114
Polymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
Polymer–Fullerene Bulk‐Heterojunction Solar Cells
Brabec, C. J., Gowrisanker, S., Halls, J. J. M., Laird, D., Jia, S., & Williams, S. P. (2010) · Advanced Materials · doi:10.1002/adma.200903697 · Cited by 2,621
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
Self-citationSolution-Processed Metal Nanowire Mesh Transparent Electrodes
Lee, J.-Y., Connor, S. T., Cui, Y., & Peumans, P. (2008) · Nano Letters · doi:10.1021/nl073296g · Cited by 1,857
Cited by
He, Z., Zhong, C., Huang, X., Wong, W., Wu, H., Chen, L., Su, S., & Cao, Y. (2011) · Advanced Materials · doi:10.1002/adma.201103006 · Cited by 2,134
Docampo, P., Ball, J. M., Darwich, M., Eperon, G. E., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3761 · Cited by 1,703
Rational Design of High Performance Conjugated Polymers for Organic Solar Cells
Zhou, H., Yang, L., & You, W. (2012) · Macromolecules · doi:10.1021/ma201648t · Cited by 1,501
Roll-to-roll fabrication of polymer solar cells
Søndergaard, R., Hösel, M., Angmo, D., Larsen-Olsen, T. T., & Krebs, F. C. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70019-6 · Cited by 1,450
Self-citationStability of Polymer Solar Cells
Jørgensen, M., Norrman, K., Gevorgyan, S. A., Tromholt, T., Andreasen, B., & Krebs, F. C. (2012) · Advanced Materials · doi:10.1002/adma.201104187 · Cited by 1,366
Self-citationTechnologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
Dou, L., You, J., Hong, Z., Xu, Z., Li, G., Street, R. A., & Yang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302563 · Cited by 1,151
Roll‐to‐Roll fabrication of large area functional organic materials
Søndergaard, R. R., Hösel, M., & Krebs, F. C. (2013) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23192 · Cited by 1,065
Self-citationNanotechnology‐Enabled Energy Harvesting for Self‐Powered Micro‐/Nanosystems
Wang, Z. L., & Wu, W. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201656 · Cited by 1,063
Stability of perovskite solar cells
Wang, D., Wright, M., Elumalai, N. K., & Uddin, A. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.12.025 · Cited by 998
High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells
Small, C. E., Chen, S., Subbiah, J., Amb, C. M., Tsang, S.-W., Lai, T.-H., Reynolds, J. R., & So, F. (2012) · Nature Photonics · doi:10.1038/nphoton.2011.317 · Cited by 931
Root, S. E., Savagatrup, S., Printz, A. D., Rodriquez, D., & Lipomi, D. J. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00003 · Cited by 904
Stretchable Organic Solar Cells
Lipomi, D. J., Tee, B. C. ‐., Vosgueritchian, M., & Bao, Z. (2011) · Advanced Materials · doi:10.1002/adma.201004426 · Cited by 853
Chueh, C.-C., Li, C.-Z., & Jen, A. K.-Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03824j · Cited by 799
Flexible and Semitransparent Organic Solar Cells
Li, Y., Xu, G., Cui, C., & Li, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701791 · Cited by 788
Organic—inorganic hybrid solar cells: A comparative review
Wright, M., & Uddin, A. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.07.006 · Cited by 654
Hachmann, J., Olivares-Amaya, R., Atahan-Evrenk, S., Amador-Bedolla, C., Sánchez-Carrera, R. S., Gold-Parker, A., Vogt, L., Brockway, A. M., & Aspuru-Guzik, A. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz200866s · Cited by 653
Krebs, F. C., Fyenbo, J., & Jørgensen, M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01178a · Cited by 635
Self-citationElectronic Properties of Transparent Conductive Films of PEDOT:PSS on Stretchable Substrates
Lipomi, D. J., Lee, J. A., Vosgueritchian, M., Tee, B. C.-K., Bolander, J. A., & Bao, Z. (2012) · Chemistry of Materials · doi:10.1021/cm203216m · Cited by 580
Technology and Market Perspective for Indoor Photovoltaic Cells
Mathews, I., Kantareddy, S. N., Buonassisi, T., & Peters, I. M. (2019) · Joule · doi:10.1016/j.joule.2019.03.026 · Cited by 567
Solar cells with one-day energy payback for the factories of the future
Espinosa, N., Hösel, M., Angmo, D., & Krebs, F. C. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02728j · Cited by 496
Self-citationBulk‐Heterojunction Organic Solar Cells: Five Core Technologies for Their Commercialization
Kang, H., Kim, G., Kim, J., Kwon, S., Kim, H., & Lee, K. (2016) · Advanced Materials · doi:10.1002/adma.201601197 · Cited by 489
Neutral Color Semitransparent Microstructured Perovskite Solar Cells
Eperon, G. E., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn4052309 · Cited by 470
The meniscus-guided deposition of semiconducting polymers
Gu, X., Shaw, L., Gu, K., Toney, M. F., & Bao, Z. (2018) · Nature Communications · doi:10.1038/s41467-018-02833-9 · Cited by 462
Ambient fabrication of flexible and large-area organic light-emitting devices using slot-die coating
Sandström, A., Dam, H. F., Krebs, F. C., & Edman, L. (2012) · Nature Communications · doi:10.1038/ncomms2002 · Cited by 451
Self-citationProgress, challenges and perspectives in flexible perovskite solar cells
Di Giacomo, F., Fakharuddin, A., Jose, R., & Brown, T. M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01137c · Cited by 428
Zhou, E., Cong, J., Wei, Q., Tajima, K., Yang, C., & Hashimoto, K. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201005408 · Cited by 419
Interfacial Dipole in Organic and Perovskite Solar Cells
Chen, Q., Wang, C., Li, Y., & Chen, L. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c07439 · Cited by 397
Stretchable, elastic materials and devices for solar energy conversion
Lipomi, D. J., & Bao, Z. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01881g · Cited by 392
Malinauskas, T., Tomkute-Luksiene, D., Sens, R., Daskeviciene, M., Send, R., Wonneberger, H., Jankauskas, V., Bruder, I., & Getautis, V. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5090385 · Cited by 368
Business, market and intellectual property analysis of polymer solar cells
Nielsen, T. D., Cruickshank, C., Foged, S., Thorsen, J., & Krebs, F. C. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.04.074 · Cited by 361
Self-citationEspinosa, N., García-Valverde, R., Urbina, A., & Krebs, F. C. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.08.020 · Cited by 342
Self-citationEncapsulation for long-term stability enhancement of perovskite solar cells
Matteocci, F., Cinà, L., Lamanna, E., Cacovich, S., Divitini, G., Midgley, P. A., Ducati, C., & Di Carlo, A. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.041 · Cited by 340
Po, R., Bernardi, A., Calabrese, A., Carbonera, C., Corso, G., & Pellegrino, A. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43460e · Cited by 336
Schmidt, T. M., Larsen‐Olsen, T. T., Carlé, J. E., Angmo, D., & Krebs, F. C. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500569 · Cited by 336
Self-citationEffect of synthetic accessibility on the commercial viability of organic photovoltaics
Osedach, T. P., Andrew, T. L., & Bulović, V. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24138f · Cited by 333
Kim, Y. Y., Yang, T.-Y., Suhonen, R., Kemppainen, A., Hwang, K., Jeon, N. J., & Seo, J. (2020) · Nature Communications · doi:10.1038/s41467-020-18940-5 · Cited by 319
Shah, S. S., Niaz, F., Ehsan, M. A., Das, H. T., Younas, M., Khan, A. S., Rahman, H. U., Nayem, S. M. A., Oyama, M., & Aziz, M. A. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110152 · Cited by 317
ZnO cathode buffer layers for inverted polymer solar cells
Liang, Z., Zhang, Q., Jiang, L., & Cao, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02510a · Cited by 317
Morphology of all-polymer solar cells
McNeill, C. R. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03071c · Cited by 300
A review of the operating limits in slot die coating processes
Ding, X., Liu, J., & Harris, T. A. L. (2016) · AIChE Journal · doi:10.1002/aic.15268 · Cited by 294
Green chemistry for organic solar cells
Burke, D. J., & Lipomi, D. J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41096j · Cited by 283
Razza, S., Castro-Hermosa, S., Di Carlo, A., & Brown, T. M. (2016) · APL Materials · doi:10.1063/1.4962478 · Cited by 271
Luo, Y., Jiang, J., Zhou, W., Yang, H., Luo, J., Qi, X., Zhang, H., Yu, D. Y. W., Li, C. M., & Yu, T. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm16419a · Cited by 267
Interlayers for non-fullerene based polymer solar cells: distinctive features and challenges
Sorrentino, R., Kozma, E., Luzzati, S., & Po, R. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02503h · Cited by 265
Guo, X., Zhou, N., Lou, S. J., Hennek, J. W., Ponce Ortiz, R., Butler, M. R., Boudreault, P.-L. T., Strzalka, J., Morin, P.-O., Leclerc, M., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3081583 · Cited by 265
Photochemical stability of π-conjugated polymers for polymer solar cells: a rule of thumb
Manceau, M., Bundgaard, E., Carlé, J. E., Hagemann, O., Helgesen, M., Søndergaard, R., Jørgensen, M., & Krebs, F. C. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03105d · Cited by 253
Self-citationRoll-to-Roll Coating Technology and Its Applications: A Review
Park, J., Shin, K., & Lee, C. (2016) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-016-0067-z · Cited by 140
Roll‐to‐Roll Fabrication of Multilayer Films for High Capacity Optical Data Storage
Ryan, C., Christenson, C. W., Valle, B., Saini, A., Lott, J., Johnson, J., Schiraldi, D., Weder, C., Baer, E., Singer, K. D., et al. (2012) · Advanced Materials · doi:10.1002/adma.201200669 · Cited by 61
Lee, J. Y., Song, H. J., Lee, S. M., Lee, J. H., & Moon, D. K. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.06.005 · Cited by 44
High-rate roll-to-roll stack and lamination of multilayer structured membrane electrode assembly
Chen, J., Liu, H., Huang, Y., & Yin, Z. (2016) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.06.022 · Cited by 41
Side chain porphyrin moiety linked to polymer-fullerene composite solar cell
Angiolini, L., Benelli, T., Cocchi, V., Lanzi, M., & Salatelli, E. (2013) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2013.05.007 · Cited by 23
Metadata
- Authors
- Krebs, F. C., Tromholt, T., & Jørgensen, M.
- Venue
- Nanoscale
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 2
- Issue
- 6
- Pages
- 873
- ISSN
- 2040-3364 (ISSN-L)
- 2040-3372
- OpenAlex
- W2123664627
- Cited by
- 1,024
- References
- 37
- FWCI
- 111.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.