Impact of in situ polymer coating on particle dispersion into solid laser-generated nanocomposites
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The crucial step in the production of solid nanocomposites is the uniform embedding of nanoparticles into the polymer matrix, since the colloidal properties or specific physical properties are very sensitive to particle dispersion within the nanocomposite. Therefore, we studied a laser-based generation method of a nanocomposite which enables us to control the agglomeration of nanoparticles and to increase the single particle dispersion within polyurethane. For this purpose, we ablated targets of silver and copper inside a polymer-doped solution of tetrahydrofuran by a picosecond laser (using a pulse energy of 125 μJ at 33.3 kHz repetition rate) and hardened the resulting colloids into solid polymers. Electron microscopy of these nanocomposites revealed that primary particle size, agglomerate size and particle dispersion strongly depend on concentration of the polyurethane added before laser ablation. 0.3 wt% polyurethane is the optimal polymer concentration to produce nanocomposites with improved particle dispersion and adequate productivity. Lower polyurethane concentration results in agglomeration whereas higher concentration reduces the production rate significantly. The following evaporation step did not change the distribution of the nanocomposite inside the polyurethane matrix. Hence, the in situ coating of nanoparticles with polyurethane during laser ablation enables simple integration into the structural analogue polymer matrix without additives. Furthermore, it was possible to injection mold these in situ-stabilized nanocomposites without affecting particle dispersion. This clarifies that sufficient in situ stabilization during laser ablation in polymer solution is able to prevent agglomeration even in a hot polymer melt.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of silver nanoparticles by laser ablation in polyvinylpyrrolidone solutions
Tsuji, T., Thang, D.-H., Okazaki, Y., Nakanishi, M., Tsuboi, Y., & Tsuji, M. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.02.048 · Cited by 262
Pulsed Laser Ablation of Zinc in Tetrahydrofuran: Bypassing the Cavitation Bubble
Wagener, P., Schwenke, A., Chichkov, B. N., & Barcikowski, S. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp911243a · Cited by 133
Self-citation
Cited by
Laser Synthesis and Processing of Colloids: Fundamentals and Applications
Zhang, D., Gökce, B., & Barcikowski, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00468 · Cited by 1,344
Self-citationXiao, J., Liu, P., Wang, C. X., & Yang, G. W. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.02.004 · Cited by 352
Pulsed Laser in Liquids Made Nanomaterials for Catalysis
Forsythe, R. C., Cox, C. P., Wilsey, M. K., & Müller, A. M. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01069 · Cited by 259
How Citrate Ligands Affect Nanoparticle Adsorption to Microparticle Supports
Wagener, P., Schwenke, A., & Barcikowski, S. (2012) · Langmuir · doi:10.1021/la204839m · Cited by 132
Self-citationSchwenke, A., Wagener, P., Nolte, S., & Barcikowski, S. (2011) · Applied Physics A · doi:10.1007/s00339-011-6398-9 · Cited by 83
Self-citationMessina, G. C., Wagener, P., Streubel, R., De Giacomo, A., Santagata, A., Compagnini, G., & Barcikowski, S. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp42626a · Cited by 68
Self-citationLabusch, M., Cunha, A. P. A., Wirtz, S. F., Reichenberger, S., Cleve, E., Söffker, D., & Barcikowski, S. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.02.080 · Cited by 13
Self-citation
Metadata
- Authors
- Wagener, P., Brandes, G., Schwenke, A., & Barcikowski, S.
- Venue
- Physical Chemistry Chemical Physics
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 13
- Issue
- 11
- Pages
- 5120
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W2023352530
- Cited by
- 47
- References
- 2
- FWCI
- 4.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.