Model oxide supported MoS2 HDS catalysts: structure and surface properties
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Supported hydrodesulfidation (HDS) MoS2/SiO2, MoS2/γ-Al2O3 and MoS2/MgO catalysts having a model character have been synthesized by using CS2 as the sulfiding agent and deeply investigated by means of several techniques. XRPD, HRTEM, Raman and UV-Vis methods have been applied to obtain information on the morphology and the structure of the catalysts as well as on the vibrational and spectroscopic properties. It is shown that, when compared with HRTEM results, XRPD, Raman and UV-Vis data give realistic information on the stacking degree, on the particle size distribution and on the heterogeneity of supported MoS2 particles on the various supports. (S K-, Mo L3- and K- edges) EXAFS and XANES spectroscopies have been also used to set up the best sulfidation procedure. UV-vis analysis under controlled atmosphere has been performed to understand the presence of sulfur vacancies and the valence state of Mo ions associated with them. To explore the structure of coordinatively unsaturated Mo sites after reducing or sulfiding treatments (with CS2 or, occasionally, with H2S), in situFTIR of adsorbed CO has been performed. It is demonstrated that CO is a sensitive probe for coordinatively unsaturated sites and that the formation of sulfur vacancies on the MoS2 surface upon reduction in pure H2 at 673 K is accompanied by an increase of the coordinative unsaturation and a decrease of the valence state of a fraction of surface Mo cations, mainly located on corner and edge sites. Furthermore, it is demonstrated that this process can be reversed upon interaction with the sulfiding agent and that this reversible behavior is really mimicking some of the elementary acts occurring in the HDS process. The complexity of the IR results suggests that the adopted reduction procedure in pure H2 at 673 K induces the formation of several types of sulfur vacancies, presumably located in different crystallographic positions. It is also concluded that the sulfiding steps are strongly involving the surface of the support and that reductive treatments at high T in H2 are causing sulfur depletion not only from supported MoS2 particles, but also from the supporting phase. The involvement of the support is particularly relevant for Al2O3 and MgO.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Catalytic Properties of Single Layers of Transition Metal Sulfide Catalytic Materials
Chianelli, R. R., Siadati, M. H., De la Rosa, M. P., Berhault, G., Wilcoxon, J. P., Bearden, R., & Abrams, B. L. (2006) · Catalysis Reviews · doi:10.1080/01614940500439776 · Cited by 304
Cited by
Li, H., Yin, Z., He, Q., Li, H., Huang, X., Lu, G., Fam, D. W. H., Tok, A. I. Y., Zhang, Q., & Zhang, H. (2012) · Small · doi:10.1002/smll.201101016 · Cited by 1,536
Outstanding mechanical properties of monolayer MoS2 and its application in elastic energy storage
Peng, Q., & De, S. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp52879k · Cited by 304
Chung, D. Y., Park, S.-K., Chung, Y.-H., Yu, S.-H., Lim, D.-H., Jung, N., Ham, H. C., Park, H.-Y., Piao, Y., Yoo, S. J., et al. (2014) · Nanoscale · doi:10.1039/c3nr05228a · Cited by 287
Defects Enhance the Electrocatalytic Hydrogen Evolution Properties of MoS2‐based Materials
Cheng, Y., Song, H., Wu, H., Zhang, P., Tang, Z., & Lu, S. (2020) · Chemistry – An Asian Journal · doi:10.1002/asia.202000752 · Cited by 86
Zeleke, T. S., Tsai, M.-C., Weret, M. A., Huang, C.-J., Birhanu, M. K., Liu, T.-C., Huang, C.-P., Soo, Y.-L., Yang, Y.-W., Su, W.-N., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b01266 · Cited by 51
Metadata
- Authors
- Cesano, F., Bertarione, S., Piovano, A., Agostini, G., Rahman, M. M., Groppo, E., Bonino, F., Scarano, D., Lamberti, C., Bordiga, S., Montanari, L., Bonoldi, L., Millini, R., & Zecchina, A.
- Venue
- Catalysis Science & Technology
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 1
- Issue
- 1
- Pages
- 123
- ISSN
- 2044-4753 (ISSN-L)
- 2044-4761
- OpenAlex
- W2148181703
- Cited by
- 83
- References
- 1
- FWCI
- 6.26
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Model oxide supported MoS2 HDS catalysts: structure and surface properties. https://app.cochat.ai/papers/10.1039/c0cy00050g
- The paper
- Cesano, F., Bertarione, S., Piovano, A., Agostini, G., Rahman, M. M., Groppo, E., Bonino, F., Scarano, D., Lamberti, C., Bordiga, S., Montanari, L., Bonoldi, L., Millini, R., & Zecchina, A. (2011). Model oxide supported MoS2 HDS catalysts: structure and surface properties. Catalysis Science & Technology. https://doi.org/10.1039/c0cy00050g
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.