Hydrocarbon proton conducting polymers for fuel cell catalyst layers
Open accessThe DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Proton exchange membrane fuel cells (PEMFCs) employing proton conducting membranes are promising power sources for automotive applications. Perfluorosulfonic acid (PFSA) ionomer represents the state-of-the-art polymer used in both the membrane and catalyst layer to facilitate the transport of protons. However, PFSA ionomer is recognized as having significant drawbacks for large-scale commercialization, which include the high cost of synthesis and use of fluorine-based chemistry. According to published research much effort has been directed to the synthesis and study of non-PFSA electrolyte membranes, commonly referred to as hydrocarbon membranes, which has led to optimism that the less expensive proton conducting membranes will be available in the not-so-distant future. Equally important, however, is the replacement of PFSA ionomer in the catalyst layer, but in contrast to membranes, studies of catalyst layers that incorporate a hydrocarbon polyelectrolyte are relatively sparse and have not been reviewed in the open literature; despite the knowledge that hydrocarbon polyelectrolytes in the catalyst layer generally lead to a decrease in electrochemical fuel cell kinetics and mass transport. This review highlights the role of the solid polymer electrolyte in catalyst layers on pertinent parameters associated with fuel cell performance, and focuses on the effect of replacing perfluorosulfonic acid ionomer with hydrocarbon polyelectrolytes. Collectively, this review aims to provide a better understanding of factors that have hindered the transition from PFSA to non-PFSA based catalyst layers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gasteiger, H. A., Kocha, S. S., Sompalli, B., & Wagner, F. T. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.06.021 · Cited by 4,876
State of Understanding of Nafion
Mauritz, K. A., & Moore, R. B. (2004) · Chemical Reviews · doi:10.1021/cr0207123 · Cited by 4,791
On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells
Kreuer, K. D. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00632-3 · Cited by 2,969
Passalacqua, E., Lufrano, F., Squadrito, G., Patti, A., & Giorgi, L. (2001) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00679-4 · Cited by 440
Soboleva, T., Zhao, X., Malek, K., Xie, Z., Navessin, T., & Holdcroft, S. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900600y · Cited by 424
Self-citationUchida, M., Fukuoka, Y., Sugawara, Y., Eda, N., & Ohta, A. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836988 · Cited by 309
Fernández, R., Ferreira-Aparicio, P., & Daza, L. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.02.048 · Cited by 120
Zhang, L., Ma, C., & Mukerjee, S. (2003) · Electrochimica Acta · doi:10.1016/s0013-4686(03)00257-3 · Cited by 102
Fabrication of a thin catalyst layer using organic solvents
Yang, T.-H., Yoon, Y.-G., Park, G.-G., Lee, W.-Y., & Kim, C.-S. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.018 · Cited by 74
Cited by
Proton-conducting crystalline porous materials
Meng, X., Wang, H.-N., Song, S.-Y., & Zhang, H.-J. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00528d · Cited by 697
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Self-citationWang, C. R., Stansberry, J. M., Mukundan, R., Chang, H.-M. J., Kulkarni, D., Park, A. M., Plymill, A. B., Firas, N. M., Liu, C. P., Lang, J. T., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00904 · Cited by 402
Liang, X., Zhang, F., Feng, W., Zou, X., Zhao, C., Na, H., Liu, C., Sun, F., & Zhu, G. (2013) · Chem. Sci. · doi:10.1039/c2sc21927a · Cited by 379
Tufa, R. A., Pawlowski, S., Veerman, J., Bouzek, K., Fontananova, E., di Profio, G., Velizarov, S., Goulão Crespo, J., Nijmeijer, K., & Curcio, E. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.04.111 · Cited by 312
Tang, Z., Huang, Q.-A., Wang, Y.-J., Zhang, F., Li, W., Li, A., Zhang, L., & Zhang, J. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228361 · Cited by 276
Kang, Z., Mo, J., Yang, G., Retterer, S. T., Cullen, D. A., Toops, T. J., Green Jr, J. B., Mench, M. M., & Zhang, F.-Y. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02368a · Cited by 257
Qiu, D., Peng, L., Lai, X., Ni, M., & Lehnert, W. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109289 · Cited by 208
The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
“However, these hydrocarbon ionomers are used in CLs with poor performance due to their low oxygen permeability [118, 122].”
BackgroundNguyen, H., Klose, C., Metzler, L., Vierrath, S., & Breitwieser, M. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103559 · Cited by 133
A highly durable fuel cell electrocatalyst based on double-polymer-coated carbon nanotubes
Berber, M. R., Hafez, I. H., Fujigaya, T., & Nakashima, N. (2015) · Scientific Reports · doi:10.1038/srep16711 · Cited by 55
Metadata
- Authors
- Peron, J., Shi, Z., & Holdcroft, S.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 5
- Pages
- 1575
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2170869058
- Cited by
- 122
- References
- 9
- FWCI
- 4.90
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.