The DOI matches its Crossref record.
Fischer–Tropsch fuels refinery design
Abstract
Carbon sources, such as coal, natural gas, biomass and waste, can be converted into transportation fuels by combining appropriate gasification, Fischer–Tropsch and refining technologies. Efficient refining of the Fischer–Tropsch synthesis derived syncrude requires a different approach to refinery design than commonly applied to crude oil refinery design. The design of refineries to optimise the production of on-specification motor-gasoline, jet fuel and diesel fuel respectively from both high temperature Fischer–Tropsch (HTFT) syncrude and low temperature Fischer–Tropsch (LTFT) are considered. Refinery designs are presented for the production of motor-gasoline and jet fuel with better than 50% yield (better than 70% selectivity on transportation fuel), without resorting to very complex designs. Only diesel fuel refining presented a problem, since the production of on-specification EN590:2004 diesel fuel is limited by a Fischer–Tropsch specific cetane-density-yield trade-off. The compound classes that are required to produce diesel fuel in high yield that meet both minimum cetane number and minimum density requirements are not abundant in Fischer–Tropsch syncrude. Refinery designs for diesel fuel production was limited to a yield of less than 25% EN 590 : 2004 compliant diesel fuel. This yield restriction does not apply when diesel fuel specifications do not have a minimum density requirement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Centi, G., Quadrelli, E. A., & Perathoner, S. (2013) · Energy & Environmental Science · doi:10.1039/c3ee00056g · Cited by 1,257
Cheng, K., Zhou, W., Kang, J., He, S., Shi, S., Zhang, Q., Pan, Y., Wen, W., & Wang, Y. (2017) · Chem · doi:10.1016/j.chempr.2017.05.007 · Cited by 533
Opportunities, recent trends and challenges of integrated biorefinery: Part I
Maity, S. K. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.11.092 · Cited by 446
Carbon-based catalysts for Fischer–Tropsch synthesis
Chen, Y., Wei, J., Duyar, M. S., Ordomsky, V. V., Khodakov, A. Y., & Liu, J. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00905a · Cited by 407
Efficient photosynthesis of carbon monoxide from CO2 using perovskite photovoltaics
Schreier, M., Curvat, L., Giordano, F., Steier, L., Abate, A., Zakeeruddin, S. M., Luo, J., Mayer, M. T., & Grätzel, M. (2015) · Nature Communications · doi:10.1038/ncomms8326 · Cited by 348
Metadata
- Authors
- Klerk, A. D.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 4
- Pages
- 1177
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W1999235075
- Cited by
- 196
- References
- 0
- FWCI
- 4.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fischer–Tropsch fuels refinery design. https://app.cochat.ai/papers/10.1039/c0ee00692k
- The paper
- Klerk, A. D. (2011). Fischer–Tropsch fuels refinery design. Energy & Environmental Science. https://doi.org/10.1039/c0ee00692k
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.