Hydroprocessing of jatropha oil and its mixtures with gas oil
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Hydroprocessing catalysts, sulfided Ni–W/SiO2–Al2O3, Co–Mo/Al2O3 and Ni–Mo/Al2O3 have been developed, and their performances in hydroprocessing of jatropha oil and its mixtures with refinery gas oil compared in terms of, detailed product distribution in order to optimize the catalyst and conditions that can give maximum yield of desired transportation fuel such as diesel or kerosene (jet). C15–C18 hydrocarbon yield (diesel range) is highest (97.9%) over Ni–Mo catalyst, while it is 80.8% over Ni–W catalyst and surprisingly low (49.2%) over Co–Mo catalyst. Jatropha oil with high as well as low free fatty acid (FFA) contents could be hydroprocessed with little observable effect on reactor metallurgy. The isomers to n-paraffins (i/n) ratio is very low and different for the three types of catalysts- nearly 22–36 times higher for the hydrocracking (Ni–W) catalyst than that for the hydrotreating (Ni–Mo) catalyst. The hydrodeoxygenation pathway for oxygen removal from triglyceride is favored over the fresh Ni–Mo and Co–Mo catalysts, while decarboxylation/decarbonylation pathway is favored over the Ni–W catalyst. But, resulfidation of used Ni–Mo catalyst results in decarboxylation/decarbonylation route being slightly more favored. The yield of diesel range (250–380 °C) product during co-processing varied between 88–92% for the Ni–Mo catalyst. Hydrodesulfurization of gas oil is better during co-processing with jatropha oil. The activation energy for overall S-removal is much lower than that for overall O-removal. Densities of the products were also observed to meet the required specification.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rodolfi, L., Chini Zittelli, G., Bassi, N., Padovani, G., Biondi, N., Bonini, G., & Tredici, M. R. (2009) · Biotechnology and Bioengineering · doi:10.1002/bit.22033 · Cited by 2,879
Fuel ethanol from cellulosic biomass
Lynd, L. R., Cushman, J. H., Nichols, R. J., & Wyman, C. E. (1991) · Science · doi:10.1126/science.251.4999.1318 · Cited by 965
Huber, G. W., O’Connor, P., & Corma, A. (2007) · Applied Catalysis A: General · doi:10.1016/j.apcata.2007.07.002 · Cited by 637
Biofuel: The little shrub that could - maybe
Fairless, D. (2007) · Nature · doi:10.1038/449652a · Cited by 450
Hydroprocessing of Bio-Oils and Oxygenates to Hydrocarbons. Understanding the Reaction Routes
Donnis, B., Egeberg, R. G., Blom, P., & Knudsen, K. G. (2009) · Topics in Catalysis · doi:10.1007/s11244-008-9159-z · Cited by 410
Cited by
Peng, B., Yao, Y., Zhao, C., & Lercher, J. A. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201106243 · Cited by 377
Okolie, J. A., Patra, B. R., Mukherjee, A., Nanda, S., Dalai, A. K., & Kozinski, J. A. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.01.014 · Cited by 356
Biomass-derived aviation fuels: Challenges and perspective
Wang, M., Dewil, R., Maniatis, K., Wheeldon, J., Tan, T., Baeyens, J., & Fang, Y. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.04.004 · Cited by 331
Hydroprocessing challenges in biofuels production
Furimsky, E. (2013) · Catalysis Today · doi:10.1016/j.cattod.2012.11.008 · Cited by 284
Douvartzides, S. L., Charisiou, N. D., Papageridis, K. N., & Goula, M. A. (2019) · Energies · doi:10.3390/en12050809 · Cited by 272
Metadata
- Authors
- Kumar, R., Rana, B. S., Tiwari, R., Verma, D., Kumar, R., Joshi, R. K., Garg, M. O., & Sinha, A. K.
- Venue
- Green Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 12
- Issue
- 12
- Pages
- 2232
- ISSN
- 1463-9262 (ISSN-L)
- 1463-9270
- OpenAlex
- W2125447458
- Cited by
- 144
- References
- 5
- FWCI
- 14.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.