The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing
Abstract
The improvement of the performance of roll-to-roll processed polymer solar cell modules through miniaturization of the device outline is described. The devices were prepared using full roll-to-roll processing comprising flexographic printing, slot-die coating and rotary screen printing to create 5 mm wide lines of ZnO, P3HT:[60/70]PCBM, PEDOT:PSS and silver on an ITO-PET substrate. The lines were spaced by 1 mm and the devices were completed by encapsulation using roll-to-roll lamination on both sides using a pressure sensitive adhesive and a multilayered barrier material having a UV-filter with a cut-off at 390 nm, oxygen and water vapor transmission rates of respectively 0.01 cm3 m−2 bar−1 day−1 and 0.04 g m−2 day−1. The final modules comprised 16 serially connected cells. The technical yield was 89% based on the criterion that the Voc had to be larger than 7.2 V. This set of modules gave respectively a voltage, current, fill factor and power conversion efficiency of 8.47 ± 0.41 V, −23.20 ± 4.10 mA, 35.4 ± 2.8% and 1.96 ± 0.34% in the case of modules based on P3HT:[60]PCBM. A total of 1960 modules were prepared for each run and the best power conversion reached was 2.75% for devices based on P3HT:[70]PCBM. The solar cell modules were used to demonstrate the complete manufacture of a small lamp entirely using techniques of flexible electronics. The solar cell module was used to charge a polymer lithium ion battery through a blocking diode. The entire process was fully automated and demonstrates the capacity of polymer solar cells in the context of flexible and printed electronics. Finally a comparison was made between the learning curve for OPV and crystalline silicon solar cells in terms of the cost per watt peak and the cumulative watt peak. OPV as a technology was found to have a significantly steeper learning curve.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Self-citationPolymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
Self-citationKrebs, F. C., Gevorgyan, S. A., & Alstrup, J. (2009) · Journal of Materials Chemistry · doi:10.1039/b823001c · Cited by 1,229
Self-citationUpscaling of polymer solar cell fabrication using full roll-to-roll processing
Krebs, F. C., Tromholt, T., & Jørgensen, M. (2010) · Nanoscale · doi:10.1039/b9nr00430k · Cited by 1,024
Self-citationKrebs, F. C., Jørgensen, M., Norrman, K., Hagemann, O., Alstrup, J., Nielsen, T. D., Fyenbo, J., Larsen, K., & Kristensen, J. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.001 · Cited by 808
Self-citationKrebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.012 · Cited by 780
Self-citationAdvanced materials and processes for polymer solar cell devices
Helgesen, M., Søndergaard, R., & Krebs, F. C. (2010) · J. Mater. Chem. · doi:10.1039/b913168j · Cited by 767
Self-citationOrganic tandem solar cells: A review
Ameri, T., Dennler, G., Lungenschmied, C., & Brabec, C. J. (2009) · Energy & Environmental Science · doi:10.1039/b817952b · Cited by 763
Krebs, F. C. (2009) · Organic Electronics · doi:10.1016/j.orgel.2009.03.009 · Cited by 608
Self-citationHigh Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends
Hoth, C. N., Choulis, S. A., Schilinsky, P., & Brabec, C. J. (2007) · Advanced Materials · doi:10.1002/adma.200700911 · Cited by 513
Krebs, F. C., Nielsen, T. D., Fyenbo, J., Wadstrøm, M., & Pedersen, M. S. (2010) · Energy & Environmental Science · doi:10.1039/b918441d · Cited by 483
Self-citationFabrication of bulk heterojunction plastic solar cells by screen printing
Shaheen, S. E., Radspinner, R., Peyghambarian, N., & Jabbour, G. E. (2001) · Applied Physics Letters · doi:10.1063/1.1413501 · Cited by 479
Business, market and intellectual property analysis of polymer solar cells
Nielsen, T. D., Cruickshank, C., Foged, S., Thorsen, J., & Krebs, F. C. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.04.074 · Cited by 361
Self-citationRoll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.04.020 · Cited by 312
Self-citationPolymer based organic solar cells using ink-jet printed active layers
Aernouts, T., Aleksandrov, T., Girotto, C., Genoe, J., & Poortmans, J. (2008) · Applied Physics Letters · doi:10.1063/1.2833185 · Cited by 292
Krebs, F. C., Alstrup, J., Spanggaard, H., Larsen, K., & Kold, E. (2004) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.02.031 · Cited by 249
Self-citationGirotto, C., Rand, B. P., Genoe, J., & Heremans, P. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.11.052 · Cited by 216
Life cycle analysis of organic photovoltaic technologies
García‐Valverde, R., Cherni, J. A., & Urbina, A. (2010) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.967 · Cited by 191
Blankenburg, L., Schultheis, K., Schache, H., Sensfuss, S., & Schrödner, M. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.013 · Cited by 160
Ex‐ante environmental and economic evaluation of polymer photovoltaics
Roes, A. L., Alsema, E. A., Blok, K., & Patel, M. K. (2009) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.891 · Cited by 159
Patternable polymer bulk heterojunction photovoltaic cells on plastic by rotogravure printing
Ding, J. M., Vornbrock, A. D. L. F., Ting, C., & Subramanian, V. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.003 · Cited by 104
Using Light-Induced Thermocleavage in a Roll-to-Roll Process for Polymer Solar Cells
Krebs, F. C., & Norrman, K. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900858x · Cited by 101
Self-citationvan Sark, W. G. J. H. M., Alsema, E. A., Junginger, M., de Moor, H. H. C., & Schaeffer, G. J. (2007) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.806 · Cited by 65
Cited by
Roll-to-roll fabrication of polymer solar cells
Søndergaard, R., Hösel, M., Angmo, D., Larsen-Olsen, T. T., & Krebs, F. C. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70019-6 · Cited by 1,450
Self-citationTobjörk, D., & Österbacka, R. (2011) · Advanced Materials · doi:10.1002/adma.201004692 · Cited by 1,287
Roll‐to‐Roll fabrication of large area functional organic materials
Søndergaard, R. R., Hösel, M., & Krebs, F. C. (2013) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23192 · Cited by 1,065
Self-citationConducting Polymer Nanowire Arrays for High Performance Supercapacitors
Wang, K., Wu, H., Meng, Y., & Wei, Z. (2014) · Small · doi:10.1002/smll.201301991 · Cited by 802
Chueh, C.-C., Li, C.-Z., & Jen, A. K.-Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03824j · Cited by 799
Metadata
- Authors
- Krebs, F. C., Fyenbo, J., & Jørgensen, M.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 20
- Issue
- 41
- Pages
- 8994
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W1977772900
- Cited by
- 635
- References
- 24
- FWCI
- 71.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.