Highly sensitive humidity sensor based on amorphous Al2O3nanotubes
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Amorphous Al2O3 nanotubes were obtained by the transformation of NH4Al(OH)2CO3 nanotubes annealed at 600 °C. The tube-like nanostructures not only increase efficient sites for gas adsorption, but also promote the dissociation of water absorbed onto the surfaces of the nanotube walls. Moreover, they also provide effective and fast channels for vapor and liquid transport. Therefore, the sensors based on Al2O3 nanotubes show high sensitivity and fast response/recovery time to humidity. The impedance changes approximately four orders of magnitude as relative humidity (RH) varies from 11% to 95% at the measured frequency of 40 Hz. Additionally, the sensor also presents relatively small hysteresis and long-term stability. For low RH levels, the protonic conductor is dominant, whereas for increasing RH levels the ionic contribution becomes prevalent. This study demonstrates that Al2O3 nanotubes have promising applications in environmental monitoring.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
One‐Dimensional Nanostructures: Synthesis, Characterization, and Applications
Xia, Y., Yang, P., Sun, Y., Wu, Y., Mayers, B., Gates, B., Yin, Y., Kim, F., & Yan, H. (2003) · Advanced Materials · doi:10.1002/adma.200390087 · Cited by 8,559
Cited by
Ultrahigh humidity sensitivity of graphene oxide
Bi, H., Yin, K., Xie, X., Ji, J., Wan, S., Sun, L., Terrones, M., & Dresselhaus, M. S. (2013) · Scientific Reports · doi:10.1038/srep02714 · Cited by 707
Zhang, D., Chang, H., Li, P., Liu, R., & Xue, Q. (2016) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2015.11.024 · Cited by 431
Advances and new directions in gas-sensing devices
Kim, I.-D., Rothschild, A., & Tuller, H. L. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.041 · Cited by 343
Full‐Textile Wireless Flexible Humidity Sensor for Human Physiological Monitoring
Ma, L., Wu, R., Patil, A., Zhu, S., Meng, Z., Meng, H., Hou, C., Zhang, Y., Liu, Q., Yu, R., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904549 · Cited by 302
Carbon Nanocoil-Based Fast-Response and Flexible Humidity Sensor for Multifunctional Applications
Wu, J., Sun, Y.-M., Wu, Z., Li, X., Wang, N., Tao, K., & Wang, G. P. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b18599 · Cited by 264
Metadata
- Authors
- Cheng, B., Tian, B., Xie, C., Xiao, Y., & Lei, S.
- Venue
- J. Mater. Chem.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 21
- Issue
- 6
- Pages
- 1907-1912
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2007973004
- Cited by
- 142
- References
- 1
- FWCI
- 4.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Highly sensitive humidity sensor based on amorphous Al2O3nanotubes. https://app.cochat.ai/papers/10.1039/c0jm02753g
- The paper
- Cheng, B., Tian, B., Xie, C., Xiao, Y., & Lei, S. (2011). Highly sensitive humidity sensor based on amorphous Al2O3nanotubes. J. Mater. Chem. https://doi.org/10.1039/c0jm02753g
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.