The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
In situ polymerization of graphene nanosheets and polyurethane with enhanced mechanical and thermal properties
Abstract
Polyurethane (PU) composites reinforced with graphene nanosheets (GNSs) were prepared by in situpolymerization. Graphene nanosheets, which were derived from chemically reduced graphite oxide (GO) nanosheets, were characterized by solid-state 13C MAS NMR, XRD and FTIR. A morphological study showed that, due to the formation of chemical bonds, the GNS was dispersed well in the PU matrix. With the incorporation of 2.0 wt% of GNSs, the tensile strength and storage modulus of the PU increased by 239% and 202%, respectively. The nanocomposites displayed high electrical conductivity, and good thermal stability of PU was also achieved. The facile and rapid technique presented here will provide an effective and promising method of preparing graphene-based polymer composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Two-dimensional gas of massless Dirac fermions in graphene
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Katsnelson, M. I., Grigorieva, I. V., Dubonos, S. V., & Firsov, A. A. (2005) · Nature · doi:10.1038/nature04233 · Cited by 21,611
Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide
Stankovich, S., Dikin, D. A., Piner, R. D., Kohlhaas, K. A., Kleinhammes, A., Jia, Y., Wu, Y., Nguyen, S. T., & Ruoff, R. S. (2007) · Carbon · doi:10.1016/j.carbon.2007.02.034 · Cited by 13,878
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Experimental observation of the quantum Hall effect and Berry's phase in graphene
Zhang, Y., Tan, Y.-W., Stormer, H. L., & Kim, P. (2005) · Nature · doi:10.1038/nature04235 · Cited by 13,435
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Preparation and characterization of graphene oxide paper
Dikin, D. A., Stankovich, S., Zimney, E. J., Piner, R. D., Dommett, G. H. B., Evmenenko, G., Nguyen, S. T., & Ruoff, R. S. (2007) · Nature · doi:10.1038/nature06016 · Cited by 5,594
Single Sheet Functionalized Graphene by Oxidation and Thermal Expansion of Graphite
McAllister, M. J., Li, J.-L., Adamson, D. H., Schniepp, H. C., Abdala, A. A., Liu, J., Herrera-Alonso, M., Milius, D. L., Car, R., Prud'homme, R. K., et al. (2007) · Chemistry of Materials · doi:10.1021/cm0630800 · Cited by 3,569
Cited by
Mechanical properties of graphene and graphene-based nanocomposites
Papageorgiou, D. G., Kinloch, I. A., & Young, R. J. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.07.004 · Cited by 2,579
The mechanics of graphene nanocomposites: A review
Young, R. J., Kinloch, I. A., Gong, L., & Novoselov, K. S. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.05.005 · Cited by 1,294
Dorri Moghadam, A., Omrani, E., Menezes, P. L., & Rohatgi, P. K. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.03.014 · Cited by 906
Advanced Flame‐Retardant Methods for Polymeric Materials
Liu, B., Zhao, H., & Wang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202107905 · Cited by 887
Hwang, J., Yoon, T., Jin, S. H., Lee, J., Kim, T., Hong, S. H., & Jeon, S. (2013) · Advanced Materials · doi:10.1002/adma.201302495 · Cited by 766
The Fabrication, Properties, and Uses of Graphene/Polymer Composites
Du, J., & Cheng, H. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201200029 · Cited by 674
Liu, H., Dong, M., Huang, W., Gao, J., Dai, K., Guo, J., Zheng, G., Liu, C., Shen, C., & Guo, Z. (2017) · Journal of Materials Chemistry C · doi:10.1039/c6tc03713e · Cited by 664
Graphene and graphene oxide and their uses in barrier polymers
Yoo, B. M., Shin, H. J., Yoon, H. W., & Park, H. B. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.39628 · Cited by 495
A manufacturing perspective on graphene dispersions
Johnson, D. W., Dobson, B. P., & Coleman, K. S. (2015) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2015.11.004 · Cited by 440
General overview of graphene: Production, properties and application in polymer composites
Phiri, J., Gane, P., & Maloney, T. C. (2017) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2016.10.004 · Cited by 427
Mechanisms of mechanical reinforcement by graphene and carbon nanotubes in polymer nanocomposites
Papageorgiou, D. G., Li, Z., Liu, M., Kinloch, I. A., & Young, R. J. (2020) · Nanoscale · doi:10.1039/c9nr06952f · Cited by 423
Electrical percolation in graphene–polymer composites
Marsden, A. J., Papageorgiou, D. G., Vallés, C., Liscio, A., Palermo, V, Bissett, M. A., Young, R. J., & Kinloch, I. A. (2018) · 2D Materials · doi:10.1088/2053-1583/aac055 · Cited by 396
Kumar, A., Sharma, K., & Dixit, A. R. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-04196-y · Cited by 338
Yadav, S. K., & Cho, J. W. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2012.12.028 · Cited by 315
Faniyi, I. O., Fasakin, O., Olofinjana, B., Adekunle, A. S., Oluwasusi, T. V., Eleruja, M. A., & Ajayi, E. O. B. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-1188-7 · Cited by 314
Recent Advances in the Covalent Modification of Graphene With Polymers
Salavagione, H. J., Martínez, G., & Ellis, G. (2011) · Macromolecular Rapid Communications · doi:10.1002/marc.201100527 · Cited by 295
Mechanotribological Aspects of MXene‐Reinforced Nanocomposites
Malaki, M., & Varma, R. S. (2020) · Advanced Materials · doi:10.1002/adma.202003154 · Cited by 292
Recent Advances in Fabrication and Characterization of Graphene-Polymer Nanocomposites
Galpaya, D., Wang, M., Liu, M., Motta, N., Waclawik, E., & Yan, C. (2012) · Graphene · doi:10.4236/graphene.2012.12005 · Cited by 262
Click coupled graphene for fabrication of high‐performance polymer nanocomposites
Yadav, S. K., Yoo, H. J., & Cho, J. W. (2013) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23155 · Cited by 64
Influence of graphene on self-assembly of polyurethane and evaluation of its biomedical properties
Patel, D. K., Rana, D., Aswal, V. K., Srivastava, S., Roy, P., & Maiti, P. (2015) · Polymer · doi:10.1016/j.polymer.2015.03.076 · Cited by 41
Metadata
- Authors
- Wang, X., Hu, Y., Song, L., Yang, H., Xing, W., & Lu, H.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 21
- Issue
- 12
- Pages
- 4222
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W1974170022
- Cited by
- 391
- References
- 29
- FWCI
- 13.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.