The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Infrared study of the influence of reducible iron(iii) metal sites on the adsorption of CO, CO2, propane, propene and propyne in the mesoporous metal–organic framework MIL-100
Abstract
The present study illustrates the importance of the oxidation state of iron within the mesoporous iron trimesate [{Fe(3)O(H(2)O)(2)F(0.81)(OH)(0.19)}{C(6)H(3)(CO(2))(3)}(2)] denoted MIL-100(Fe) (MIL= Material from Institut Lavoisier) during adsorption of molecules that can interact with the accessible metal sites through π-back donation. Adsorption of CO has been first followed by FTIR spectroscopy to quantify the Lewis acid sites in the dehydrated Fe(III) sample, outgassed at 150 °C, and on the partially reduced Fe(II/III), outgassed at 250 °C. The exposure of MIL-100(Fe) to CO(2), propane, propene and propyne has then been studied by FTIR spectroscopy and microcalorimetry. It appears that π-back donating molecules are strongly adsorbed on reduced iron(II) sites despite the weaker Lewis acidity of cus Fe(2+) sites compared to that of Fe(3+) ones, as shown by pyridine adsorption.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Functional Porous Coordination Polymers
Kitagawa, S., Kitaura, R., & Noro, S. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200300610 · Cited by 11,071
Reticular synthesis and the design of new materials
Yaghi, O. M., O'Keeffe, M., Ockwig, N. W., Chae, H. K., Eddaoudi, M., & Kim, J. (2003) · Nature · doi:10.1038/nature01650 · Cited by 9,101
Hybrid porous solids: past, present, future
Férey, G. (2008) · Chem. Soc. Rev. · doi:10.1039/b618320b · Cited by 5,822
Self-citationEngineering Metal Organic Frameworks for Heterogeneous Catalysis
Corma, A., García, H., & Llabrés i Xamena, F. X. (2010) · Chemical Reviews · doi:10.1021/cr9003924 · Cited by 3,478
Secondary building units, nets and bonding in the chemistry of metal–organic frameworks
Tranchemontagne, D. J., Mendoza-Cortés, J. L., O’Keeffe, M., & Yaghi, O. M. (2009) · Chemical Society Reviews · doi:10.1039/b817735j · Cited by 2,478
Synthesis and Stability of Tagged UiO-66 Zr-MOFs
Kandiah, M., Nilsen, M. H., Usseglio, S., Jakobsen, S., Olsbye, U., Tilset, M., Larabi, C., Quadrelli, E. A., Bonino, F., & Lillerud, K. P. (2010) · Chemistry of Materials · doi:10.1021/cm102601v · Cited by 2,031
Multiple Functional Groups of Varying Ratios in Metal-Organic Frameworks
Deng, H., Doonan, C. J., Furukawa, H., Ferreira, R. B., Towne, J., Knobler, C. B., Wang, B., & Yaghi, O. M. (2010) · Science · doi:10.1126/science.1181761 · Cited by 1,917
Férey, G., & Serre, C. (2009) · Chemical Society Reviews · doi:10.1039/b804302g · Cited by 1,654
Self-citationSynthesis and catalytic properties of MIL-100(Fe), an iron(iii) carboxylate with large pores
Horcajada, P., Surblé, S., Serre, C., Hong, D.-Y., Seo, Y.-K., Chang, J.-S., Grenèche, J.-M., Margiolaki, I., & Férey, G. (2007) · Chem. Commun. · doi:10.1039/b704325b · Cited by 1,538
Self-citationBioMOFs: Metal–Organic Frameworks for Biological and Medical Applications
McKinlay, A. C., Morris, R. E., Horcajada, P., Férey, G., Gref, R., Couvreur, P., & Serre, C. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000048 · Cited by 1,256
Self-citation
Cited by
Hydrocarbon Separations in a Metal-Organic Framework with Open Iron(II) Coordination Sites
Bloch, E. D., Queen, W. L., Krishna, R., Zadrozny, J. M., Brown, C. M., & Long, J. R. (2012) · Science · doi:10.1126/science.1217544 · Cited by 1,928
Hadjiivanov, K. I., Panayotov, D. A., Mihaylov, M. Y., Ivanova, E. Z., Chakarova, K. K., Andonova, S. M., & Drenchev, N. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00487 · Cited by 1,278
Metal–organic and covalent organic frameworks as single-site catalysts
Rogge, S. M. J., Bavykina, A., Hajek, J., Garcia, H., Olivos-Suarez, A. I., Sepúlveda-Escribano, A., Vimont, A., Clet, G., Bazin, P., Kapteijn, F., et al. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00033b · Cited by 1,077
Self-citationMetal–Organic Frameworks for Air Purification of Toxic Chemicals
DeCoste, J. B., & Peterson, G. W. (2014) · Chemical Reviews · doi:10.1021/cr4006473 · Cited by 958
Potential of microporous metal–organic frameworks for separation of hydrocarbon mixtures
Bao, Z., Chang, G., Xing, H., Krishna, R., Ren, Q., & Chen, B. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01886f · Cited by 647
High valence 3p and transition metal based MOFs
Devic, T., & Serre, C. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00081a · Cited by 605
Self-citationTang, J., & Wang, J. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b00092 · Cited by 583
Hydrocarbon Separations in Metal–Organic Frameworks
Herm, Z. R., Bloch, E. D., & Long, J. R. (2014) · Chemistry of Materials · doi:10.1021/cm402897c · Cited by 581
Yang, Q., Liu, D., Zhong, C., & Li, J.-R. (2013) · Chemical Reviews · doi:10.1021/cr400005f · Cited by 514
Horcajada, P., Salles, F., Wuttke, S., Devic, T., Heurtaux, D., Maurin, G., Vimont, A., Daturi, M., David, O., Magnier, E., et al. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206936e · Cited by 504
Self-citationRationale of Drug Encapsulation and Release from Biocompatible Porous Metal–Organic Frameworks
Cunha, D., Ben Yahia, M., Hall, S., Miller, S. R., Chevreau, H., Elkaïm, E., Maurin, G., Horcajada, P., & Serre, C. (2013) · Chemistry of Materials · doi:10.1021/cm400798p · Cited by 483
Self-citationAdsorptive removal of naproxen and clofibric acid from water using metal-organic frameworks
Hasan, Z., Jeon, J., & Jhung, S. H. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.01.005 · Cited by 456
Li, B., Zhang, Y., Krishna, R., Yao, K., Han, Y., Wu, Z., Ma, D., Shi, Z., Pham, T., Space, B., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502119z · Cited by 455
Lv, H., Zhao, H., Cao, T., Qian, L., Wang, Y., & Zhao, G. (2015) · Journal of Molecular Catalysis A: Chemical · doi:10.1016/j.molcata.2015.02.007 · Cited by 452
Seo, Y., Yoon, J. W., Lee, J. S., Hwang, Y. K., Jun, C., Chang, J., Wuttke, S., Bazin, P., Vimont, A., Daturi, M., et al. (2012) · Advanced Materials · doi:10.1002/adma.201104084 · Cited by 362
Self-citationWang, Y., Peh, S. B., & Zhao, D. (2019) · Small · doi:10.1002/smll.201900058 · Cited by 342
Influence of framework metal ions on the dye capture behavior of MIL-100 (Fe, Cr) MOF type solids
Tong, M., Liu, D., Yang, Q., Devautour-Vinot, S., Maurin, G., & Zhong, C. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11807j · Cited by 320
Nitric Oxide Adsorption and Delivery in Flexible MIL-88(Fe) Metal–Organic Frameworks
McKinlay, A. C., Eubank, J. F., Wuttke, S., Xiao, B., Wheatley, P. S., Bazin, P., Lavalley, J.-C., Daturi, M., Vimont, A., De Weireld, G., et al. (2013) · Chemistry of Materials · doi:10.1021/cm304037x · Cited by 294
Self-citationDhakshinamoorthy, A., Alvaro, M., Horcajada, P., Gibson, E., Vishnuvarthan, M., Vimont, A., Grenèche, J.-M., Serre, C., Daturi, M., & Garcia, H. (2012) · ACS Catalysis · doi:10.1021/cs300345b · Cited by 263
Self-citation
Metadata
- Authors
- Leclerc, H., Vimont, A., Lavalley, J.-C., Daturi, M., Wiersum, A. D., Llwellyn, P. L., Horcajada, P., Férey, G., & Serre, C.
- Venue
- Physical Chemistry Chemical Physics
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 13
- Issue
- 24
- Pages
- 11748
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W2074129088
- Cited by
- 259
- References
- 33
- FWCI
- 9.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.