Ionic liquid nanotribology: mica–silica interactions in ethylammonium nitrate
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Colloid probe atomic force microscopy has been used to study the nanotribological properties of the silica-ethylammonium nitrate (EAN)-mica system. Normal force curve measurements reveal a series of steps at separations that are consistent with the size of an EAN ion pair (0.5 nm) due to displacement of structured solvent layers as the two surfaces are brought together. At closest separations, two steps are measured with widths of 0.3 nm and 0.1 nm, which are too small to be due to an ion pair layer. The 0.3 nm step is attributed to a partial displacement of a silica-bound cation-rich layer, with residual cations being removed in the subsequent 0.1 nm step. Lateral force measurements reveal that the frictional response is dependent on the number of ion pair layers between the surfaces. At low forces, when there is more than a single layer of EAN between silica and mica, the lateral force increases relatively steeply with applied load, and is independent of the sliding speed. At intermediate forces, a single layer of cations in an intercalated bilayer structure is present between the surfaces. The friction coefficient (μ) increases logarithmically with sliding speed consistent with an activated, discontinuous sliding process. At high force, μ is small and once again, independent of sliding velocity. The adsorbed cation layer is bound primarily to mica and compressed by the high normal force. This robust layering with a well-defined sliding plane permits the colloid probe to slide easily over the mica surface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Calibration of rectangular atomic force microscope cantilevers
Sader, J. E., Chon, J. W. M., & Mulvaney, P. (1999) · Review of Scientific Instruments · doi:10.1063/1.1150021 · Cited by 2,145
Velocity Dependence of Atomic Friction
Gnecco, E., Bennewitz, R., Gyalog, T., Loppacher, C., Bammerlin, M., Meyer, E., & Güntherodt, H.-J. (2000) · Physical Review Letters · doi:10.1103/physrevlett.84.1172 · Cited by 649
The shear properties of Langmuir—Blodgett layers
Briscoe, B. J., & Evans, D. C. B. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0048 · Cited by 411
Byrne, N., Wang, L.-M., Belieres, J.-P., & Angell, C. A. (2007) · Chem. Commun. · doi:10.1039/b618943a · Cited by 223
Cited by
Structure and Nanostructure in Ionic Liquids
Hayes, R., Warr, G. G., & Atkin, R. (2015) · Chemical Reviews · doi:10.1021/cr500411q · Cited by 2,293
Self-citationIonic Liquids at Electrified Interfaces
Fedorov, M. V., & Kornyshev, A. A. (2014) · Chemical Reviews · doi:10.1021/cr400374x · Cited by 1,398
Protic Ionic Liquids: Evolving Structure–Property Relationships and Expanding Applications
Greaves, T. L., & Drummond, C. J. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00158 · Cited by 877
Ionic liquid lubricants: when chemistry meets tribology
Cai, M., Yu, Q., Liu, W., & Zhou, F. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00126k · Cited by 476
Microstructural and Dynamical Heterogeneities in Ionic Liquids
Wang, Y.-L., Li, B., Sarman, S., Mocci, F., Lu, Z.-Y., Yuan, J., Laaksonen, A., & Fayer, M. D. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00693 · Cited by 465
Ionic liquids in confined geometries
Perkin, S. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp23814d · Cited by 391
Quantized friction across ionic liquid thin films
Smith, A. M., Lovelock, K. R. J., Gosvami, N. N., Welton, T., & Perkin, S. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp52779d · Cited by 159
Cooper, P. K., Wear, C. J., Li, H., & Atkin, R. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03262 · Cited by 81
Self-citationControlling the nanoscale friction by layered ionic liquid films
An, R., Qiu, X., Shah, F. U., Riehemann, K., & Fuchs, H. (2020) · Physical Chemistry Chemical Physics · doi:10.1039/d0cp02146f · Cited by 24
Metadata
- Authors
- Werzer, O., Cranston, E. D., Warr, G. G., Atkin, R., & Rutland, M. W.
- Venue
- Phys. Chem. Chem. Phys.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 14
- Issue
- 15
- Pages
- 5147-5152
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W2166812989
- Cited by
- 91
- References
- 4
- FWCI
- 3.82
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.