The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
How to exploit the full potential of the dip-coating process to better control film formation
Abstract
Dip-coating is an ideal method to prepare thin layers from chemical solutions since it is a low-cost and waste-free process that is easy to scale up and offers a good control on thickness. For such reasons, it is becoming more and more popular not only in research and development laboratories, but also in industrial production, as testified by the increasing number of annual publications (9, 180, and 480 articles in 1990, 2000, and 2010, respectively). Even so, the full potential of dip-coating has not yet been fully explored and exploited. This article highlights the recent progresses made by tuning the processing conditions beyond conventional ranges to prepare more and more complex and controlled nanostructured layers. Especially, we will see how one can take advantage of an accurate tuning of the withdrawal speed and of the atmosphere to control the nanostructuration originating from evaporation-induced-self-assembly (EISA), together with the final thickness from a few nm up to 1 μm from the same initial solution. A new regime of deposition, involving capillary induced convective coating that is highly suitable for the deposition from aqueous and/or highly diluted solutions, will be described. Finally, it will be demonstrated that dip-coating is also a well suited method to impregnate porosity, to make nanocomposites, or to perform nanocasting. The present discussion is illustrated with systems of interests in domains such as optics, energies, nanoelectronics, nanofluidics, etc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Block copolymer based nanostructures: Materials, processes, and applications to electronics
Kim, H.-C., Park, S.-M., & Hinsberg, W. D. (2010) · Chemical Reviews · doi:10.1021/cr900159v · Cited by 1,017
Drying-Mediated Self-Assembly of Nanoparticles
Rabani, E., Reichman, D. R., Geissler, P. L., & Brus, L. E. (2003) · Nature · doi:10.1038/nature02087 · Cited by 913
Fundamentals of Mesostructuring Through Evaporation‐Induced Self‐Assembly
Grosso, D., Cagnol, F., Soler‐Illia, G. J. D. A. A., Crepaldi, E. L., Amenitsch, H., Brunet‐Bruneau, A., Bourgeois, A., & Sanchez, C. (2004) · Advanced Functional Materials · doi:10.1002/adfm.200305036 · Cited by 827
Self-citationSanchez, C., Boissière, C., Grosso, D., Laberty, C., & Nicole, L. (2008) · Chemistry of Materials · doi:10.1021/cm702100t · Cited by 809
Self-citationReview of sol-gel thin film formation
Brinker, C. J., Hurd, A. J., Schunk, P., Frye, G. C., & Ashley, C. S. (1992) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(05)80653-2 · Cited by 587
Nanoparticle printing with single-particle resolution
Kraus, T., Malaquin, L., Schmid, H., Riess, W., Spencer, N. D., & Wolf, H. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.262 · Cited by 449
Templating Nanoporous Polymers with Ordered Block Copolymers
Olson, D. A., Chen, L., & Hillmyer, M. A. (2008) · Chemistry of Materials · doi:10.1021/cm702239k · Cited by 362
Preparation of Sol−Gel Films by Dip-Coating in Extreme Conditions
Faustini, M., Louis, B., Albouy, P. A., Kuemmel, M., & Grosso, D. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp9114755 · Cited by 329
Self-citationLe Berre, M., Chen, Y., & Baigl, D. (2009) · Langmuir · doi:10.1021/la803646e · Cited by 308
Faustini, M., Nicole, L., Boissière, C., Innocenzi, P., Sanchez, C., & Grosso, D. (2010) · Chemistry of Materials · doi:10.1021/cm100937e · Cited by 295
Self-citationColloidal Route for Preparing Optical Thin Films of Nanoporous Metal–Organic Frameworks
Horcajada, P., Serre, C., Grosso, D., Boissière, C., Perruchas, S., Sanchez, C., & Férey, G. (2009) · Advanced Materials · doi:10.1002/adma.200801851 · Cited by 289
Self-citationAdsorption properties in high optical quality nanoZIF-8 thin films with tunable thickness
Demessence, A., Boissière, C., Grosso, D., Horcajada, P., Serre, C., Férey, G., Soler-Illia, G. J. A. A., & Sanchez, C. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00500b · Cited by 185
Self-citationFree coating of a Newtonian liquid onto a vertical surface
Spiers, R. P., Subbaraman, C. V., & Wilkinson, W. L. (1974) · Chemical Engineering Science · doi:10.1016/0009-2509(74)80048-5 · Cited by 179
Elaboration and properties of hierarchically structured optical thin films of MIL-101(Cr)
Demessence, A., Horcajada, P., Serre, C., Boissière, C., Grosso, D., Sanchez, C., & Férey, G. (2009) · Chemical Communications · doi:10.1039/b915011k · Cited by 174
Self-citationSorption Properties of Mesoporous Multilayer Thin Films
Fuertes, M. C., Colodrero, S., Lozano, G., González-Elipe, A. R., Grosso, D., Boissière, C., Sánchez, C., Soler‐Illia, G. J. A. A., & Míguez, H. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp710612y · Cited by 118
Self-citationFaustini, M., Vayer, M., Marmiroli, B., Hillmyer, M. A., Amenitsch, H. W., Sinturel, C., & Grosso, D. (2010) · Chemistry of Materials · doi:10.1021/cm101502n · Cited by 53
Self-citationJärn, M., Xu, Q., & Lindén, M. (2010) · Langmuir · doi:10.1021/la1006583 · Cited by 31
Gold Nanoelectrode Arrays and their Evaluation by Impedance Spectroscopy and Cyclic Voltammetry
Lantiat, D., Vivier, V., Laberty‐Robert, C., Grosso, D., & Sánchez, C. (2010) · ChemPhysChem · doi:10.1002/cphc.200900929 · Cited by 28
Self-citation
Cited by
Molecular engineering of contact interfaces for high-performance perovskite solar cells
Isikgor, F. H., Zhumagali, S., T. Merino, L. V., De Bastiani, M., McCulloch, I., & De Wolf, S. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00503-3 · Cited by 600
Bioinspired polymer vesicles and membranes for biological and medical applications
Palivan, C. G., Goers, R., Najer, A., Zhang, X., Car, A., & Meier, W. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00569h · Cited by 584
Wen, Y., & Xu, J. (2017) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.28482 · Cited by 378
Dip-coating for fibrous materials: mechanism, methods and applications
Tang, X., & Yan, X. (2017) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-016-4197-7 · Cited by 350
Recent Progress on Titanium Dioxide Nanomaterials for Photocatalytic Applications
Nasr, M., Eid, C., Habchi, R., Miele, P., & Bechelany, M. (2018) · ChemSusChem · doi:10.1002/cssc.201800874 · Cited by 340
Metadata
- Authors
- Grosso, D.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 21
- Issue
- 43
- Pages
- 17033
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W1974493398
- Cited by
- 400
- References
- 18
- FWCI
- 13.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.