The DOI matches its Crossref record.
Multicolor electrochromic polyaniline–WO3 hybrid thin films: One-pot molecular assembling synthesis
Abstract
Nanostructured polyaniline (PANI)–WO3 hybrid thin films were synthesized via a molecular assembling route in a solution of aniline using peroxotungstic acid (PTA) as the dopant and ammonium persulfate as the oxidant. The films show a porous morphology with nanorod arrays on the surface, and WO3 is uniformly incorporated into the polymer network. Electrochemical and electrochromic tests including cyclic voltammetry, chronoamperometry and corresponding in situ transmittance of PANI–WO3 hybrid films compared with neat PANI film and sol–gel WO3 film were conducted in 0.5 M sulfuric acid solution. The hybrid films, being a dual electrochromic material, varied from royal purple to green, pale yellow and finally dark blue as the applied potential was scanned from 0.8 V to −0.5 V. Compared to sulfate doped PANI film, high colouration efficiency and comparable durability are obtained in the PANI–WO3 hybrid films. The PANI–WO3 hybrid films also show faster switching speed and better durability than WO3 film. The enhanced electrochromic properties such as faster switching speed and better durability are mainly attributed to the combining of advantages of both materials and the formation of the donor–acceptor system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Electrochromics for smart windows: Oxide-based thin films and devices
Granqvist, C. G. (2014) · Thin Solid Films · doi:10.1016/j.tsf.2014.02.002 · Cited by 1,080
Hybrid Materials and Polymer Electrolytes for Electrochromic Device Applications
Thakur, V. K., Ding, G., Ma, J., Lee, P. S., & Lu, X. (2012) · Advanced Materials · doi:10.1002/adma.201200213 · Cited by 821
Preparations, Properties, and Applications of Polyaniline and Polyaniline Thin Films—A Review
Beygisangchin, M., Abdul Rashid, S., Shafie, S., Sadrolhosseini, A. R., & Lim, H. N. (2021) · Polymers · doi:10.3390/polym13122003 · Cited by 662
Electrochromic energy storage devices
Yang, P., Sun, P., & Mai, W. (2016) · Materials Today · doi:10.1016/j.mattod.2015.11.007 · Cited by 572
Viologen-based electrochromic materials and devices
Madasamy, K., Velayutham, D., Suryanarayanan, V., Kathiresan, M., & Ho, K.-C. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc00416e · Cited by 490
Conductive polymer nanocomposites: a critical review of modern advanced devices
Zhan, C., Yu, G., Lu, Y., Wang, L., Wujcik, E., & Wei, S. (2017) · Journal of Materials Chemistry C · doi:10.1039/c6tc04269d · Cited by 301
Yu, Z., Cai, G., Liu, X., & Tang, D. (2021) · Analytical Chemistry · doi:10.1021/acs.analchem.0c04501 · Cited by 282
Zhou, K., Wang, H., Jiu, J., Liu, J., Yan, H., & Suganuma, K. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.03.175 · Cited by 261
Metadata
- Authors
- Zhang, J., Tu, J.-P., Zhang, D., Qiao, Y.-Q., Xia, X.-H., Wang, X.-L., & Gu, C.-D.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 21
- Issue
- 43
- Pages
- 17316
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2002808939
- Cited by
- 158
- References
- 0
- FWCI
- 8.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.